Transcript Slide 1
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Copyright © 2008 D E WALT. All rights reserved
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
What is MOBILELOCK?
• MOBILELOCK is a completely self-contained, battery powered security system ideal for monitoring remote assets. Four built-in sensors can be customized through a secure website and alert the end-user directly or Central Monitoring Station upon alarm. Cellular assisted GPS technology provides location of assets indoors or out.
1. Alarm Notification 2. GPS Locator 3. Customizable Features 4. Portable/Wireless 5. Easy To Use
2
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Product Features
Alarm Notification - Know about a disturbance from one or more of the 5 available alarm sensors (4 built-in) GPS Locator - R emotely find stolen or lost assets anytime Customizable Features - Choose features to fit application and security needs - Controlled through secure internet website Portable/Wireless (indoor/outdoor product) - Choose between a variety of run-time options Requires No Hard-Wiring/Easy To Use - Very limited installation required
3
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Alarm Notification
• 4 sensors built into base unit – Tamper, vibration, door/window, temperature – PIR motion available as an accessory (DS510K) • Automated notification system – Phone – Email – Text • Central Station optional connections – Contact ID – SIA 4
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Customizable Features
• • • • • • • • •
User Accessible Features
Customize sensors Program arm/disarm schedules Maintain contact info Map unit Add/delete units Group units Adjust speaker settings (audible/silent) Receive status information (battery level, signal strength, etc.) View event history reports
MOBILELOCK is customized through secure webpage.
5
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
How It Works
MOBILELOCK
is mounted on the asset can be used either as a visible deterrent or kept hidden.
6
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
How It Works
User places a phone call or goes online to arm the
MOBILELOCK
unit. User can also program an arm/disarm schedule.
7
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
How It Works
If one of the built-in sensors is tripped, the
MOBILELOCK
alarm is triggered and the siren is activated (can be silent if preferred.) 8
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
How It Works
Within seconds, the alarm is transferred to either the user directly or to a CMS. If sent directly the user will receive an automated phone call, text message, or email. Up to three people can be called as well as three text messages or emails sent.
9
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
GPS Antenna
Internal Components
Siren (83 db @ 1 meter) Cellular Antenna Lithium Battery Tamper Vibration Sensor Temperature Sensor Door/Window Contact Sensor
Water Resistant
10
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Battery
• Type – Lithium Ion – 4.2 V – Rechargeable – Non-serviceable • Charging – 80% in two hours; approx 5 hours to fully charge – Can remain plugged in without causing damage • Run-time – Approximately 30 days – Less run-time in areas with poor cell signal – Less run-time in cold temperatures • Low Battery Alarm – When battery drops below 3.5V (approx. 3 days left) • Full Battery Alarm – When battery reaches 4.2V
Copyright © 2007 D E WALT. All rights reserved
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Vibration Sensor
• Detects cutting into metal containers • Detects movement of heavy equipment • Adjustable sensitivity settings – 1 least sensitive; 8 most sensitive • False Alarm Filter – Pulse Counting – 3 hits in 10 seconds, 6 in 10 seconds, or OFF • After an alarm, will not send another vibration alarm for 15 minutes to allow user time to disarm. After 15 minutes system is rearmed.
Copyright © 2007 D E WALT. All rights reserved
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Door Contact Sensor
• Protects an enclosed area • Indoor/Outdoor • Magnet can be permanently mounted • Max. 3/8” gap • When arming, if the door is opened, you will get an alarm (one time) • After an alarm, will not send another door contact alarm for 15 minutes to allow user time to disarm Copyright © 2007 D E WALT. All rights reserved
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Tamper Sensor
• Sensor on back of DS500; sets off alarm when MOBILELOCK is removed from mounting surface • When the tamper box is checked, its always “armed”; will notify the user day or night that the product has been removed • In DS505, works with tamper on back • In DS510, works with tamper on back (use wedge to ensure snug fit) Copyright © 2007 D E WALT. All rights reserved
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Temperature Sensor
• Notifies user when temperature rises or falls • Range: 0˚F – 122˚F • Approximate accuracy: +/- 2˚C • After an alarm, will not send another temperature alarm for 60 minutes to allow user time to disarm.
• Not recommended for fire protection • Because charging affects the temperature of the unit, temperature is ignored while charging; may not receive an alarm if plugged in.
Copyright © 2007 D E WALT. All rights reserved
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
DS510K Motion Detector
• Protects an indoor open area • Triggers alarm in MOBILELOCK by sending pulses to the DS500 • 50 ft range; 107 degrees (recommended to mount in a corner) • As soon as it sees motion, the PIR “sleeps” for 90 seconds to conserve battery Copyright © 2007 D E WALT. All rights reserved
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
DS520 Universal Sensor Input Adaptor
The DS520 Adaptor is designed to integrate external security sensors into the DS500 MOBILELOCK.
• Interfaces with a variety of security sensors • Monitors closed sensor for a change of state multiple sensors can be wire to the unit in a closed circuit • Provides a signal to the DS500 Base Unit when enabled and system is Armed • Easy wire up with (+) / (-) terminal block • Pass through port enables charging of the DS500 Base Unit • Internal tamper switch alarms if cover is opened when Armed
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
GPS Locator
•Assisted GPS provides the best accuracy for use in location •Assisted GPS offers improved locating abilities indoors through the use of cellular technology • On-line locating available 24/7 featuring Microsoft Virtual Earth mapping • Locating available through website or through phone menu system
Road, Aerial, & Bird’s Eye Views
18
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Product Specs
• Cellular Network: Sprint PCS data • Cellular Radio: CDMA Qualcomm 6050 chipset • Location Technology: Qualcomm® gpsOne™ • Enclosure – Weatherproof & UV resistant – Crush resistant to approx. 1,000 lbs.
• Temperature – Operating: -4 to 140F 19
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Product Specs Cont’d
• Speaker – Built-In siren (can be used silent) – Paging feature – Notification of changes, power connected/lost, arm/disarm (can be silent) • Attachment – Strong built-in magnets – Pre-drilled mounting holes 20
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
DS505K Extended Run-Time Adapter
• Extends battery up to 3 months – Batteries add approximately 2 months – Can get approximately three months total by using a fully charged DS500 • Uses 4 standard “D” non-rechargeable, alkaline batteries • For use in remote areas or sites without power Copyright © 2007 D E WALT. All rights reserved
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
DS525 Permanent Power Equipment Adapter
• Connect the DS500 to a 12V or 24V Battery; eliminates the need to recharge MOBILELOCK • •Protect heavy construction equipment such as backhoes, loaders, and tractors • •Cables and connectors included for ease of installation • Durable and weather resistant 22
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
User Interface
Copyright © 2007 D E WALT. All rights reserved
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Account Summary
The Account Summary page displays all units in the account, and gives you the option to locate, arm, and access the sensor settings.
24
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Customizing Unit Settings
25
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Unit History
26
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Update Alarm Contacts
27
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Location View
See the current location of the unit from the Location View page, or from the Unit Commands on the Customize Units page.
28
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Location History
The Location View history displays a mapped history of the past 5 locations.
29
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Arm Schedule
Set up an Arm Schedule by selecting specific times for each unit to arm and disarm. You can also do this manually.
30
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Maintain Users
Add new users and maintain current ones.
31
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
Product Offering
DS500: Includes MOBILELOCK Assisted-GPS base unit complete with four built in alarm sensors (tamper, vibration, door contact, and temperature), battery charger, and door contact magnet.
DS510K: Includes DS500 and indoor PIR motion sensor DS505K: Includes DS500 and 90 day extended run-time kit DS525: 12v/24v equipment power adaptor DS520: Universal sensor input
32
MOBILELOCK ™ GPS Locator with Anti-theft Alarm
End User Applications
Gang/ Tool Boxes Storage Containers Asset Tracking Kitchen Appliances Pull Behind Trailers Utility Companies ATVs ATM’s Materials/ Supplies Copper Wire Shipping