Transcript Chapter 13. PROCESS PLANNING

Process Engineering
ISE789 -- Manufacturing Systems
Spring 2011
Dr. R. A. Wysk
7/17/2015
13 - 1
PROCESS ENGINEERING
• Process planning is also called: manufacturing planning, process
planning, material processing, process engineering, and machine
routing.
• Which machining processes and parameters are to be used (as well
as those machines capable of performing these processes) to
convert (machine) a piece part from its initial form to a final form
predetermined (usually by a design engineer) from an engineering
drawing.
• The act of preparing detailed work instructions to produce a part.
• How to realize a given product design.
7/17/2015
13 - 2
PRODUCT REALIZATION
Product design
Process planning
Process,
machine
knowledge
Operation programming
Verification
Scheduling
Scheduling
knowledge
Execution
7/17/2015
13 - 3
PROCESS PLANNING
Design
Machine
Tool
Process
Planning
Scheduling and Production Control
7/17/2015
13 - 4
PROBLEMS FACING
MANUFACTURING INDUSTRY
Fact:
Only 11% of the machine tools in the U.S. are programmable.
More than 53% of the metal-working plants in the U.S. do not have
even one computer-controlled machine.
Some problems:
Cannot justify the cost
Lack of expertise in using such machines
Too small a batch size to offset the planning and programming costs
Source: Kelley, M.R. and Brooks, H., The State of Computerized Automation in US Manufacturing, J.F.
Kennedy School of Government, Harvard University, October 1988.
Potential benefits in reducing turnaround time by using
programmable machine tools have not been realized due to time,
complexity and costs of planning and programming.
7/17/2015
13 - 5
DOMAIN
One-of-a-kind and Small batch
Objectives: Lead-time, Cost
Approaches: process selection, use
existing facilities.
Mass production
Objective: Cost
Approaches: process design, optimization,
materials selection, facilities
design
7/17/2015
13 - 6
How do we process engineer?
•
•
•
•
•
7/17/2015
How can we make it?
How much does it cost?
How long will it take us to complete it?
How reliable will it be?
How can we recycle it
13 - 7
How can we make it?
• Is this like something else that we’ve done?
– Yes; What methods were used?
– No; Design a new process
7/17/2015
13 - 8
What methods were used?
•
•
•
•
•
•
•
7/17/2015
Machining methods
Pressworking
Welding/fabrication
Casting
Powder materials
Layered deposition
Others
13 - 9
Welding/fabrication:
Additive techniques
Initial
Stock
7/17/2015
Weld
Add-on
Weld
Add-on
Final Product
13 - 10
Machining Methods:
Subtractive techniques
Final Product
Initial
Stock
7/17/2015
Slotting
Drilling
13 - 11
Casting:
Form Methods
7/17/2015
13 - 12
ENGINEERING DESIGN MODELING
2" +0.01
-0.01
0.001 A B
10" +0.01
-0.01
A
4" +0.01
-0.01
7" +0.05
-0.05
1'-4" +0.01
-0.01
3" +0.01
-0.01
B
5" +0.01
-0.01
U*
S.F. 64 u inch
Fa c e
- *
Lo o p
Ed g e
V e rt e x
CSG MODEL
B-REP MODEL
7/17/2015
13 - 13
INTERACTION OF
PLANNING FUNCTIONS
GEOMETRIC REASONING
• global & local geometry
PROCESS SELECTION
• process capability
• process cost
CUTTER SELECTION
• available tools
• tool dimension and geometry
• geometric constraints
MACHINE TOOL SELECTION
• machine availability, cost
• machine capability
7/17/2015
SETUP PLANNING
• feature relationship
• approach directions
• process constraints
• fixture constraints
FIXTURE PLANNING
• fixture element function
• locating, supporting, and
clamping surfaces
• stability
CUTTER PATH GENERATION
• feature merging and split
• path optimization
• obstacle and interference
avoidance
13 - 14
PROCESS PLAN
• Also called : operation sheet, route sheet, operation planning
summary, or another similar name.
• The detailed plan contains:
route
processes
process parameters
machine and tool selections
fixtures
• How detail the plan is depends on the application.
• Operation: a process
• Operation Plan (Op-plan): contains the description of an operation,
includes tools, machines to be used, process parameters,
machining time, etc.
• Op-plan sequence: Summary of a process plan.
7/17/2015
13 - 15
EXAMPLE PROCESS PLANS
Route Sheet
by: T .C. Chang
P art No. S1243
P art Name: Mounting Bracket
1.
2.
3.
4.
workstat ion
Mt l Rm
Mill02
Drl01
Insp
T im e(min)
Detailed Process Plan
5
4
1
PROCESS PLAN
Oper. Routing Summary
7/17/2015
Part No. S0125-F
Part Name:Housing
Original: S.D. SmartDate: 1/1/89
Checked: C.S. GoodDate: 2/1/89
Workstati on
ACE Inc.
Material: steel 4340Si
Changes:
Date:
Approved:T .C. Chang Date:2/14/89
No.
Operati on
Descri ption
Setup
T ool
T im e
(M in)
10
Mill bottom surface1
MILL01
see attach#1
for illustration
Face mill
3 setup
6 teeth/4" dia 5 machining
20
Mill top surface
MILL01
see attach#1
Face mill
2 setup
6 teeth/4" dia 6 machining
30
Drill 4 holes
DRL02
set on surface1
twist drill
1/2" dia
2" long
2 setup
3 machining
13 - 16
FACTORS AFFECTING PROCESS
PLAN SELECTION
• Shape
• Tolerance
• Surface finish
• Size
• Material type
• Quantity
• Value of the product
• Urgency
• Manufacturing system itself
• etc.
7/17/2015
13 - 17
PROCESS PLANNING CLASSIFICATION
MANUAL
COMPUTER-AIDED
VARIANT
GT based
Computer aids for editing
Parameters selection
GENERATIVE
Some kind of decision logic
Decision tree/table
Artificial Intelligence
Objective-Oriented
Still experience based
AUTOMATIC
Design understanding
Geometric reasoning capability
7/17/2015
13 - 18
REQUIREMENTS IN
MANUAL PROCESS PLANNING
• ability to interpret an engineering drawing.
• familiar with manufacturing processes and
practice.
• familiar with tooling and fixtures.
• know what resources are available in the shop.
• know how to use reference books, such as
machinability data handbook.
• able to do computations on machining time and
cost.
• familiar with the raw materials.
• know the relative costs of processes, tooling, and
raw materials.
7/17/2015
13 - 19
INDUSTRIAL SOLUTION
.
01
2" +0.
- 0. 01
0. 001
A B
Ha n d b o o k
01
10" -+0.
0. 01
A
01
4" -+0.
0. 01
05
7" -+0.
0. 05
01
1'- 4" +0.
- 0. 01
01
3" -+0.
0. 01
B
01
5" +0.
- 0. 01
S.F. 6 4 u inch
PRODUCT
CONCEPT
CAD
N0010 G70 G 90 T08 M06
N0020 G00 X2.125 Y-0.475 Z4.000 S3157
N0030 G01 Z1.500 F63 M03
N0040 G01 Y4.100
N0050 G01 X2.625
N0060 G01 Y1.375
N0070 G01 X3.000
N0080 G03 Y2.625 I3.000 J2.000
N0090 G01 Y2.000
N0100 G01 X2.625
N0110 G01 Y-0.100
N0120 G00 Z4.000 T02 M05
N0130 F9.16 S509 M06
N0140 G81 X0.750 Y1.000 Z-0.1 R2.100 M03
N0150 G81 X0.750 Y3.000 Z-0.1 R2.100
N0160 G00 X-1.000 Y-1.000 M30
CAM
CUTTER
PATH
HUMAN - decision making
COMPUTER - geometric computation, data handling
7/17/2015
13 - 20
PROCESS PLANNING STEPS
• Study the overall shape of the part. Use this
information to classify the part and determine the type
of workstation needed.
• Thoroughly study the drawing. Try to identify every
manufacturing features and notes.
• If raw stock is not given, determine the best raw
material shape to use.
• Identify datum surfaces. Use information on datum
surfaces to determine the setups.
• Select machines for each setup.
• For each setup determine the rough sequence of
operations necessary to create all the features.
7/17/2015
13 - 21
PROCESS PLANNING STEPS
(continue)
• Sequence the operations determined in the
previous step.
• Select tools for each operation. Try to use the same
tool for several operations if it is possible. Keep in
mind the trade off on tool change time and
estimated machining time.
• Select or design fixtures for each setup.
• Evaluate the plan generate thus far and make
necessary modifications.
• Select cutting parameters for each operation.
• Prepare the final process plan document.
7/17/2015
13 - 22
COMPUTER-AIDED
PROCESS PLANNING
ADVANTAGES
1. It can reduce the skill required of a planner.
2. It can reduce the process planning time.
3. It can reduce both process planning and
manufacturing cost.
4. It can create more consistent plans.
5. It can produce more accurate plans.
6. It can increase productivity.
7/17/2015
13 - 23
WHY AUTOMATED
PROCESS PLANNING
• Shortening the lead-time
• Manufacturability feedback
• Lowering the production cost
• Consistent process plans
7/17/2015
13 - 24
PROCESS PLANNING
Design
Machining features
Workpiece Selection
Process Selection
Tool Selection
Feed, Speed Selection
Operation Sequencing
Setup Planning
Fixturing Planning
Part Programming
7/17/2015
13 - 25
VARIANT PROCESS PLANNING
part
coding
part
family
formation
standard
plan
preparation
part
coding
part
family
search
process
plan
retrieval
finished
process
plan
Standard
process
plans &
individual
process
plans
process
plan
editing
GROUP TECHNOLOGY BASED RETRIEVAL SYSTEM
7/17/2015
13 - 26
PROBLEMS ASSOCIATED WITH
THE VARIANT APPROACH
1. The components to be planned are limited to
similar components previously planned.
2. Experienced process planners are still
required to modify the standard plan for the
specific component.
3. Details of the plan cannot be generated.
4. Variant planning cannot be used in an
entirely automated manufacturing system,
without additional process planning.
7/17/2015
13 - 27
ADVANTAGES OF THE
VARIANT APPROACH
1. Once a standard plan has been written, a variety
of components can be planned.
2. Comparatively simple programming and
installation (compared with generative systems)
is required to implement a planning system.
3. The system is understandable, and the planner
has control of the final plan.
4. It is easy to learn, and easy to use.
7/17/2015
13 - 28
GENERATIVE APPROACH
A system which automatically synthesizes a
process plan for a new component.
MAJOR COMPONENTS:
(i) part description
(ii) manufacturing databases
(iii) decision making logic and
algorithms
7/17/2015
13 - 29
ADVANTAGES OF THE
GENERATIVE APPROACH
1. Generate consistent process plans rapidly;
2. New components can be planned as easily as
existing components;
3. It has potential for integrating with an
automated manufacturing facility to provide
detailed control information.
7/17/2015
13 - 30
KEY DEVELOPMENTS
1. The logic of process planning must be
identified and captured.
2. The part to be produced must be clearly and
precisely defined in a computer-compatible
format
3. The captured logic of process planning and the
part description
7/17/2015
13 - 31
PRODUCT REPRESENTATION
Geometrical information
Part shape
Design features
Technological information
Tolerances
Surface quality (surface finish, surface integrity)
Special manufacturing notes
Etc.
"Feature information"
Manufacturing features
e.g. slots, holes, pockets, etc.
7/17/2015
13 - 32
INPUT REPRESENTATION SELECTION
• How much information is needed?
• Data format required.
• Ease of use for the planning.
• Interface with other functions, such as, part
programming, design, etc.
• Easy recognition of manufacturing features.
• Easy extraction of planning information from the
representation.
7/17/2015
13 - 33
WHAT INPUT REPRESENTATIONS
GT CODE
Line drawing
Special language
Symbolic representation
Solid model
CSG
B-Rep
others?
Feature based model
7/17/2015
13 - 34
SPECIAL LANGUAGE
1
1.2
+.001
-.001
K5
3
2.5
10 CYLINDER/3,1/
11 DFIT/K,5/
12 CHAMFER/.2,2.6/
20 CYLINDER/2.5,1.2/
21 LTOL/+0.001,-0.001/
.2x2.6
AUTAP
7/17/2015
13 - 35
CIMS/PRO REPRESENTATION
X
a2
a3
a4
a1
t
a5
Y
7/17/2015
a6
Z
sweep
directio n
13 - 36
GARI REPRESENTATION
0 1.
0 3.0
F2
.5
2
F1
F3
3.0
Y
X
(F1 (type face) (direction xp) (quality 120))
(F2 (type face) (direction yp) (quality 64))
(F3 (type face) (direction ym) (quality rough))
(H1 (type countersunk-hole) (diameter 1.0)
(countersik-diameter 3.0)
(starting-from F2) (opening-into F3))
(distance H1 F1 3.0)
(countersink-depth F2 H1 0.5)
7/17/2015
13 - 37
CONCEPT OF FEATURE
Manufacturing is "feature" based.
Feature:
1 a: the structure, form, or appearance esp. of a
person
b: obs: physical beauty.
2 a: the makeup or appearance of the face or its
parts
b: a part of the face: LINEAMENT
3: a prominent part or characteristic
4: a special attraction
Webster's Ninth New Collegiate Dictionary
7/17/2015
13 - 38
FEATURES IN DESIGN AND
MANUFACTURING
A high level geometry which includes a set of
connected geometries. Its meaning is
dependent upon the application domain.
Boss
Pocket with an island
Design Feature
7/17/2015
vs
Manufacturing Feature
13 - 39
DESIGN FEATURES
• For creating a shape
• For providing a function
Motion
7/17/2015
Slot feature
13 - 40
MANUFACTURING FEATURES
• For process selection
• For fixturing
Manufacturing
is feature based.
Drilling
End mill a slot
7/17/2015
Round hole
Turning
Rotational
feature
End milling
Plane surface,
Hole, profile, slot
pocket
Ball end mill
Free form
surface
Boring Cylindrical shell
Reaming
Cylindrical shell
...
...
13 - 41
MANUFACTURING FEATURES (cont.)
?
7/17/2015
13 - 42
DATA ASSOCIATED WITH
DESIGN FEATURES
Mechanical Engineering Part Design
• Feature Type
• Dimension
• Location
• Tolerance
A Sl ot
• Surface finish
• Function
7/17/2015
13 - 43
DATA ASSOCIATED WITH
MANUFACTURING FEATURES
• Feature type
Approach
• Dimension
• Location
• Tolerance
Approach
• Surface finish
• Relations with other features
• Approach directions
° Feature classifications are not the same.
7/17/2015
13 - 44
FEATURE RECOGNITION
Extract and decompose features from a geometric
model.
• Syntactic pattern recognition
• State transition diagram and automata
• Decomposition
• Logic
• Graph matching
• Face growing
7/17/2015
13 - 45
DIFFICULTIES OF FEATURE
RECOGNITION
• Potentially large number of features.
• Features are domain and user specific.
• Lack of a theory in features.
• Input geometric model specific. Based on
incomplete models.
• Computational complexity of the algorithms.
• Existing algorithms are limited to simple
features.
7/17/2015
13 - 46
DESIGN WITH MANUFACTURING
FEATURES
Make the design process a simulation of the
manufacturing process. Features are tool swept
volumes and operators are manufacturing
processes.
Design
Bar stock - Profile
-
Bore hole
Process Planning
Turn profile
7/17/2015
Drill hole
Bore hole
13 - 47
PROS AND CONS OF DESIGN WITH
MANUFACTURING FEATURES
Pros
• Concurrent engineering - designers are forced
to think about manufacturing process.
• Simplify (eliminate) process planning.
Cons
• Hinder the creative thinking of designers.
• Use the wrong talent (designer doing process
planning).
• Interaction of features affects processes.
7/17/2015
13 - 48
BACKWARD PLANNING
.
n
io
t
ra
e
p
o
g
in
in
h
c
a
M
B o rin g
Drillin g
g
in
n
n
la
P
F i n is h e d
p a rt
Mi l l i n g
Wo rk p ie c e
7/17/2015
13 - 49
PROCESS KNOWLEDGE
REPRESENTATION
• Predicate logic
• Production rules
• Semantic Nets
• Frames
• Object Oriented Programming
7/17/2015
13 - 50
SOME RESEARCH ISSUES
• Part design representation: information contents,
data format
• Geometric reasoning: feature recognition, feature
extraction, tool approach directions, feature
relations
• Process selection: backward planning, tolerance
analysis, geometric capability, process knowledge,
process mechanics
• Tool selection: size, length, cut length, shank length,
holder, materials, geometry, roughing, and finishing
tools
7/17/2015
13 - 51
SOME RESEARCH ISSUES
(continue)
• Fixture design: fixture element model, fixturing
knowledge modeling, stability analysis,
friction/cutting force
• Tool path planning: algorithms for features,
gauging and interference avoidance algorithms,
automated path generation
• Software engineering issues: data structure, data
base, knowledge base, planning algorithms, user
interface, software interface
7/17/2015
13 - 52
A FEATURE BASED DESIGN/
PROCESS PLANNING SYSTEM
Manufacturing-Oriented Design Features
hole, straight slot, T-slot, circular slot, pocket
counterbore, sculptured surface cavity
Geometric Reasoning
Application-Specific Features (e.g. manufacturing features)
blind slot, through slot, step, etc.
approach direction, feed direction
feature relations: precedence and intersection type
Principle:
Provide designer with the freedom to describe shape -
avoid constraining manufacturing planning
or requiring detailed manufacturing knowledge.
7/17/2015
13 - 53
SOME AUTOMATED PROCESS PLANNING EFFORTS
Feature in Design
Features in Process Planning
U. Mass, Dixon: Features-based design for
manufacturing analysis of extrusions,
castings, injection molding
NIST : Automated process planning
ASU, Shah: Theory of features study for
CAM-I; Feature-mapping shell
U of Maryland, Nau: Semi-generative process
planning
Stanford,Cutkosky: feature-based design,
process planning, fixturing systems.
GE R & D, Hines: Art to Part
Helsinki, Mantyla: systems for design &
process planning.
CAM-I, UTRC: XPS-2, generative process
planning
Penn State, Wysk (Texas A&M): graph based
process planning
IBM, Rossignac:Editing & validation of
feature models; MAMOUR system.
Stanford, Cutkosky: FirstCut, integrated design
and manufacturing system based on
features.
SDRC, Chung, GE, Simmons: Feature-based
design and casting analysis.
CMI & CMU: IMW, feature based design,
expert operation planning.
QTC is one of the only efforts that
considers design through inspection
and the only one that uses deep
geometric reasoning to link design
and process planning.
U. of Twente, Holland, Kals: PARTS , feature
based input, feature recognition, operation
planning.
Allied Bendix, Hummel & Brooks: XCUT
system for cavity operation planning.
IPK Berlin & IPK Aachen
UMIST, B.J. Davies
U. of Leeds, de Pennington
U. of Tokyo, Kimura
7/17/2015
13 - 54
SOME APPROACHES
CAD
7/17/2015
Process Planner
CAM
2-D
Draft ing
• drawi ng interpretati on
• variant type plan generation
• interactive part programming
NC control
2-D
Draft ing
• automati c drawing interpretat ion
• gen. type pl an generati on
Aut om atic part
programm ing
3-D CAD
Model
• interactive drawing i nterpretati on
• gen. /vari ant type pl an
generati on
canned cutt er
path cycl es
3-D
Sol id Model
• geom etri c reas oni ng
• expert pl anner
• no human decision
automat ic part
programm ing
Feature based
soli d model
•
•
•
•
feat ure refinem ent
limi ted geomet ric reasoning
generative planning
seq may di ctated by des ign
canned/auto. cutter
path cycl e
13 - 55
THE DEVELOPMENT OF CAPP
Intelli gence o f
the syste m
Human
Expert
? tech nolo gy
geo metri c
reas onin g
man ual
pla nnin g
Data
bas e
196 0
7/17/2015
ele mentary
machin e
lea rning
expert
GT
varian t syste m
syste m
197 0
198 0
199 0
200 0
?
13 - 56