Transcript Diapositiva 1 - MDM MECATRONICS

GMM
GEAR MEASURING MACHINE
A new generation
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
GMM
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
GEAR MEASURING MACHINE
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
A new generation
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
Rigidity and long term structural stability are achieved by means
of lapped granite guideways with well dimensioned cursors
sustained from a special frictionless airbearings configuration
and design
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
Rigidity and long term structural stability are achieved by means
of lapped granite guideways with well dimensioned cursors
sustained from a special frictionless airbearings configuration
and design
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
A careful dimensioning and dislocation of the moving masses
and the pneumatic balancing system of the vertical axis have
allowed the realization of a light structure, capable of large
dimensional capability of linear and angular movements
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The linear axis (XYZ) are moved by
means of Special linear motors
thrusting along the neutral axis
without lateral components of force
and dimensioned for a minimum
thermal effects.
The range of controlled speed is
A careful dimensioning and dislocation
of the
masses
very large
andmoving
the linearity
of the
movements
is perfect
; have
and the pneumatic balancing system
of the vertical
axis
not of
easily
allowed the realization of a light characteristics
structure, capable
largeobteinable
when a rotary movement is
dimensional capability of linear and
angular movements
transformed
into a linear one
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The linear axis (XYZ) are moved by
means of Special linear motors
thrusting along the neutral axis
without lateral components of force
and dimensioned for a minimum
thermal effects.
The range of controlled speed is
very large and the linearity of the
movements is perfect ;
characteristics not easily obteinable
when a rotary movement is
transformed into a linear one
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
The linear and notary transducers are
first class high resolutions devices
made of glass protected scales with
certified CTE
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The Probing System is a patented
proprietary design of
MDM-MECATRONICS based on a
special high linearity LVDT capable
of 50nm resolution.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
The linear and notary transducers are
first class high resolutions devices
made of glass protected scales with
certified CTE
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The Probing System is a patented
proprietary design of
MDM-MECATRONICS based on a
special high linearity LVDT capable
of 50nm resolution.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The models GMM70 e GMM110 are based
to the ground by means of pneumatic
autolevelling supports of first quality
willing to warranty maximum insulation
from external vibrations and absorb the
kinetic energy of moving masses
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The models GMM70 e GMM110 are based
to the ground by means of pneumatic
autolevelling supports of first quality
willing to warranty maximum insulation
from external vibrations and absorb the
kinetic energy of moving masses
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The 4th axis is an airbearing/ballbearing
composite rotary table, moved by means
of an special high-quality torque motor
over dimensioned configured as
frictionless „Electronic Shaft“ without
mechanical reductions and capable of
a very large dinamic performance
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The 4th axis is an airbearing/ballbearing
composite rotary table, moved by means
of an special high-quality torque motor
over dimensioned configured as
frictionless „Electronic Shaft“ without
mechanical reductions and capable of
a very large dinamic performance
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
Performance Verification based on a procedure
performed from the MDM-MECATRONICS,
-DINAMICAL OPTIMIZATION OF MOVING MASSES
that is accredited in the National Calibration
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
System (SIT 082) in compliance to the
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
ISO 17025 with the use of artifacts calibrated
-PNEUMATIC ACTIVE ISOLATORS
from primary National Calibration bodies
- 4 AXIS METROLOGY
-RIGIDITY AND STRUCTURAL STABILITY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
Performance Verification based on a procedure
performed from the MDM-MECATRONICS,
-DINAMICAL OPTIMIZATION OF MOVING MASSES
that is accredited in the National Calibration
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
System (SIT 082) in compliance to the
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
ISO 17025 with the use of artifacts calibrated
-PNEUMATIC ACTIVE ISOLATORS
from primary National Calibration bodies
- 4 AXIS METROLOGY
-RIGIDITY AND STRUCTURAL STABILITY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
-Measurable Cylindrical parallel/helical,
internal/external Spur, Worm and Bevel
Gears with involute profile
-Profiles of solids of revolution
-3D Metrology and Reverse Engineering
-Statistical Process Control (SPC)
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
-Measurable Cylindrical parallel/helical,
internal/external Spur, Worm and Bevel
Gears with involute profile
-Profiles of solids of revolution
-3D Metrology and Reverse Engineering
-Statistical Process Control (SPC)
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
Metrologic SW is developed,
assisted and Licensed to end
users from the sister SW
Company MDM-Metrosoft
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
Metrologic SW is developed,
assisted and Licensed to end
users from the sister SW
Company MDM-Metrosoft
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The Windows based SW follows the
simple rule WYSIWYG (what you see is
what you get). The SW is „User
Friendly“ and adds expectise to the
operator.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The Windows based SW follows the
simple rule WYSIWYG (what you see is
what you get). The SW is „User
Friendly“ and adds expectise to the
operator.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The measurement results are
clearly rapresented with the
most popular graphs, with
numerical values and
classification always displaied
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The measurement results are
clearly rapresented with the
most popular graphs, with
numerical values and
classification always displaied
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
Profile and lead test charts with
classification compliant to
Norms DIN/ISO/AGMA
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
Profile and lead test charts with
classification compliant to
Norms DIN/ISO/AGMA
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The files of all measurements
can be printed, saved,riedited
choosing the display
parameters at need
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
The files of all measurements
can be printed, saved,riedited
choosing the display
parameters at need
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
-GMM40
-RIGIDITY AND STRUCTURAL STABILITY
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-GMM70
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
-GMM110
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
TOPICAL CHARACTERISTICS
AVAILABLE MODELS
-RIGIDITY AND STRUCTURAL STABILITY
GMM40
-DINAMICAL OPTIMIZATION OF MOVING MASSES
-LINEAR MOTORS WITH NEUTRAL AXIS THRUST
-GMM70
-POSITIONS TRANSDUCTORS AND PROBING SYSTEM
-PNEUMATIC ACTIVE ISOLATORS
-GMM110
- 4 AXIS METROLOGY
-PERFORMANCE VERIFICATION
-MEASURED PARTS
-SW MACHINE / OPERATOR INTERFACE
-GMM FAMILY
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
AVAILABLE MODELS
GMM40
Measuring Range:
X = 350mm.
Y = 240mm.
Z = 390mm.
Max Diam. = 400mm.
Max.Shaft Length = 700mm
Layout Dimensions:
Heigh:
Length:
Width:
1840mm.
2680mm.
1160mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
AVAILABLE MODELS
GMM40
Measuring Range:
X = 350mm.
Y = 240mm.
Z = 390mm.
Max Diam. = 400mm.
Max.Shaft Length = 700mm
Layout Dimensions:
Heigh:
Length:
Width:
1840mm.
2680mm.
1160mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
AVAILABLE MODELS
GMM70
Measuring Range:
X = 650mm.
Y = 390mm.
Z = 590mm.
Max Diam. = 700mm.
Max.Shaft Length = 1000mm
Layout Dimensions:
Heigh:
Length:
Width:
2200mm.
3200mm.
1395mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
AVAILABLE MODELS
GMM70
Measuring Range:
X = 650mm.
Y = 390mm.
Z = 590mm.
Max Diam. = 700mm.
Max.Shaft Length = 1000mm
Layout Dimensions:
Heigh:
Length:
Width:
2200mm.
3200mm.
1395mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
AVAILABLE MODELS
GMM110
Measuring Range:
X = 900mm.
Y = 600mm.
Z = 590mm.
Max Diam. = 1100mm.
Max.Shaft Length = 1400mm
Layout Dimensions:
Heigh:
Length:
Width:
2855mm.
3550mm.
2115mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
AVAILABLE MODELS
GMM110
Measuring Range:
X = 900mm.
Y = 600mm.
Z = 590mm.
Max Diam. = 1100mm.
Max.Shaft Length = 1400mm
Layout Dimensions:
Heigh:
Length:
Width:
2855mm.
3550mm.
2115mm.
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]
MDM MECATRONICS s.r.l. – Via IV Novembre, 22.24.26 MINERBIO (BO)
Tel 0039.051.660.5137 Fax 0039.051.661.5543 www.mdm-mecatronics.com
[email protected]