Transcript fieldtechproducts.com

XFTP SAT LITE
Satellite Meter
Interactive Training
SAT LITE Satellite Meter
About the SAT LITE Satellite Meter:
• The SAT LITE simplifies satellite
dish installation and allows precise
alignment of the dish.
• The meter measures digital satellite
signal level, bit error rate, and
carrier-to-noise ratio to confirm a
quality signal.
SAT LITE Satellite Meter
About the SAT LITE Satellite Meter:
• The positive lock signal feature
prevents the meter from displaying a
signal quality level unless the
correct satellite has been targeted.
• The SAT LITE does not require a
connection to a receiver or television
to align the satellite dish.
SAT LITE Satellite Meter
About the SAT LITE Satellite Meter:
• The SAT LITE is preconfigured with
a list of commonly available
satellites in North America.
• Up to 60 satellite configurations can
be stored in the SAT LITE’s memory.
SAT LITE Satellite Meter
The Following Functions can be
Performed with the SAT LITE:
• The SAT LITE checks the signal
level from the selected satellite.
• The features in the SAT LITE allow
for dithering (fine-tuning) of the dish.
• The SAT LITE measures the bit
error rate of the satellite signal.
• The carrier-to-noise ratio of the
signal is measured.
SAT LITE Satellite Meter
Measuring the Signal Level:
• Adjust the dish to the specified
azimuth and elevation values.
• Connect the SAT LITE to an LNB
output.
• Use the UP/DOWN keys to select the
target satellite from the list.
SAT LITE Satellite Meter
Measuring the Signal Level:
• Press the ENTER key to load the
satellite configuration and display
the “Level” screen.
• Press the ENTER key to display the
satellite’s name and signal level.
• Adjust the dish so the displayed
signal (S) and quality (Q) levels are
at their maximum.
SAT LITE Satellite Meter
Dithering the Satellite Dish:
• Using the fine-tuning bolts on the
dish assembly, adjust the dish in the
vertical plane to achieve the best
possible signal level (S).
• Using the fine-tuning bolts on the
dish assembly, adjust the dish in the
horizontal plane to achieve the best
possible signal level (S).
SAT LITE Satellite Meter
Measuring the Bit Error Rate and
Carrier-to-Noise ratio:
• While in the “Signal” screen, press
the DOWN key to display the bit
error rate and carrier-to-noise ratio.
SAT LITE Satellite Meter
This concludes the interactive training for the SAT LITE
Satellite Meter. For assistance in using your SAT LITE,
please contact:
XFTP by Trilithic
9710 Park Davis Drive
Indianapolis, IN 46235
(317) 895-3600
(800) 344-2412
www.fieldtechproducts.com [email protected]
P/N: 0010284004 v08-08