Transcript Slide 1

Benefits of Accreditation
Steps to Achieve Accreditation
Program Standards
Integrated Academic Skills
Accreditation Resources
Accreditation Documents
Compliance Review Forms
www.natef.org
As always, please feel free to contact the NATEF office with any questions or comments.
All of us here at NATEF wish you a safe and enjoyable summer.
All the best,
Trish, Chuck, Wanda, Brittany, Erin and Allisson
SUMMARY OF CHANGES
BEGINNING JULY 1, 2013
In October 2012 a review of program standards, 1-11, accreditation policies and
accreditation procedures was completed by NATEF staff, educators, manufacturer
representatives and shop owners.
In addition to the changes below there was an overall update of language,
relevancy, and a removal of as much redundancy as possible.
Throughout the Accreditation Standards documents you will find highlighted
information that has been added to clarify required documentation needed, as
well as to identify pertinent changes in the policies and procedures.
These changes will be in effect July 1, 2013.
NOTE:
Standards, Policy and Procedure changes apply to all automobile, collision repair
and refinish, and medium/heavy truck programs.
STANDARD CHANGES
Creation of new stand alone standard on Advisory Committees –
References to Advisory Committees tasks in other standards are now
in Standard 6
POLICY and PROCEDURE CHANGES
Accreditation Process –Programs will no longer have 18 months from
their expiration date to submit a renewal application.
Renewal of Accreditation application must be received in the NATEF
office within six (6) months of the program expiration date.
Applications received after the 6 month grace period will be
required to follow procedures for initial accreditation.
POLICY and PROCEDURE CHANGES
Qualifications of On-site Evaluation Team Members
Team member work experience qualifications:
Changed from 7 to 5 years
POLICY and PROCEDURE CHANGES
Program Evaluation – Go/No Go Items
Because of the new Standard 6 the Go/No Go item numbers have
changed.
Standard 6.5C is now a Go/No Go item.
POLICY and PROCEDURE CHANGES
Annual report
Each year all accredited programs will receive notification from
NATEF and are required to update all contact information.
POLICY and PROCEDURE CHANGES
Compliance Review
Programs will be notified at the 2 year anniversary of accreditation
that a compliance review is due.
The compliance review is due within 6 months of the programs 2
year anniversary.
Program not submitting a compliance review within 60 days of the
due date will be removed from the NATEF website as accredited, and
accreditation status will be set to “Due to Reaccredit”
POLICY and PROCEDURE CHANGES
On-site Evaluation Cost
To eliminate the need for programs to submit multiple payments
NATEF has rolled the cost of all processing and document fees into
one cost.
Effective
July, 2013
Accreditation
Documents
Application Fee
On-Site Evaluation.
Team Manuals
Initial
Automobile Truck Collision
Renewal of Accreditation
$0—available on website
$0-available on website
$850.00
$750.00
$425 for additional
programs at each site
$375 For additional
programs at each site
Included in application fee Included in application fee
($65 each)
Honorarium for the
ETL
($250 per day)
$500.00
$250.00
Estimated expenses
for the ETL
$300.00
$150.00
PROGRAM EVALUATION AND APPLICATION FORMS - REVISED
To accommodate the new standards
the following modifications have been made:
Program Evaluation Form – formerly Program Self-Evaluation Form
For each Standard being evaluated there is a
“What’s Needed” section.
These helpful hints are provided to assist the program prepare for
the accreditation process and on-site visit.
On-site Evaluation Cost
To eliminate the need for programs to submit multiple payments
NATEF has rolled the cost of all processing and document fees into
one cost.
PROGRAM EVALUATION AND APPLICATION FORMS - REVISED
Program Accreditation Application
Beginning July 1, 2013 there will no longer be 2 separate
applications – one for initial accreditation and a second for renewal
of accreditation.
Programs will use the same application regardless if it is an initial or
a renewal.
The 2012 renewal of accreditation application only required self
evaluation summary ratings for Standards 6 – 9.
The new application requires programs to provide an average rate
for Standards 1-12.
NATEF 2013 Program Accreditation FAQs
All of the new Program Accreditation documents are available on the
NATEF website.
The link to the documents can be found under Quick Links on the
NATEF home page.
Next are answers to some frequently asked questions.
We hope that these answers are helpful, but if you require additional
assistance please feel free to contact the NATEF office at 703-6696650, or email at [email protected].
NATEF is committed to working with each state, program and
instructor during this transition to the new 2013 Program
Accreditation Standards.
1. Have the number of Program Standards changed?
Yes, there is now a new Standard 6 Advisory Committee which groups all the Advisory Committee tasks
that were previously scattered throughout the standards.
There now a total of 12 Program Standards for Automobile programs
and 11 Program Standards for Collision and Truck Programs.
2. How do the 2013 changes affect my Truck program?
The significant change to the Truck Standards is the inclusion of
Standard 6 – Advisory Committee.
The task lists, tools/equipment list, and instructor qualifications have
not changed.
A review of these items is planned for 2014.
3. I just re-accredited, what does this mean for me?
If you just re-accredited, your program accreditation remains current
under the standards which you applied and were approved.
When you next come up for re-accreditation you must use the most
current standards that are in place at that time.
4. I just submitted my application; will the 2013 changes affect my
application?
No, if you submitted your application prior to July 1, 2013, the
program will be evaluated and accredited based on the standards in
effect when you completed your application.
5. Have the fees changed?
Yes, effective July 1, 2013 the new fee structure is:
Automobile Program Accreditation FAQ’s
1. Did the number of instructional hours change (from the 2012
standards) for any of the 3 levels of accreditation in the 2013
Standards?
Yes, however the only change in hours is at the MAST level.
The change in MAST hours to 1,200 reflects additional instructional
tasks.
The hour requirements for MLR and AST did not change.
Automobile Program Accreditation FAQ’s
2. Did the instructor qualifications change?
Yes, the chart below reflects these changes.
Automobile Program Accreditation FAQ’s
3. My program is currently accredited, when do I have to get the
ASE G1 certification?
Programs that are currently accredited will be required to meet the
2013 Instructor Qualification when the program next comes up for
re-accreditation.
Automobile Program Accreditation FAQ’s
4. I teach Engine Performance for MAST accredited program.
When do I need to have the ASE L1 certification?
Instructors currently teaching Engine Performance as part of a
MAST program will be required to meet the 2013 Instructor
Qualification of having ASE L1 certification when the program next
comes up for re-accreditation.
Automobile Program Accreditation FAQ’s
5. I’m currently ASE Master certified, why do I need to take the ASE
G1 certification exam?
After extensive discussion with subject matter experts and with the
NATEF Board, it was determined that it is in the best interest of the
program and its students for all instructors to hold this certification.
Automobile Program Accreditation FAQ’s
6. The previous NATEF Automobile Program Standards listed
required hours of instruction per area.
Is there an hour requirement per area in the 2013 standards?
No, in the new NATEF auto accreditation model, there is no specified
hour requirement per area.
There is only a total hour requirement for each level of accreditation.
Automobile Program Accreditation FAQ’s
7. I have more hours than defined by the new levels, can I teach
more tasks?
Yes, NATEF provides the minimum standards.
If your program has additional hours, resources, etc., we encourage
you to teach additional tasks that are found at the next level of
accreditation in any area.
Teaching additional tasks from a higher level of accreditation than
you currently hold does not mean you are accredited at the higher
level.
You must teach all the tasks and meet all program requirements to
accredit in the next level.
Automobile Program Accreditation FAQ’s
8. Are the P1, P2 and P3 percentages changing?
No, the percentages for tasks taught remain the same at:
Priority 1 – 95%
Priority 2 - 80%
Priority 3 - 50%
Automobile Program Accreditation FAQ’s
9. What about tools and equipment?
The updated tools and equipment list is posted in the program
documents link under Quick Links on the NATEF homepage.
Automobile Program Accreditation FAQ’s
10. I’m due to submit a compliance review in the near future.
On what standards should I base my review?
The compliance review should reflect the standards for which the
program was approved for accreditation.
However, if your program was accredited under the 2008 model but
has transitioned to the new 2012/13 model, the compliance
review forms have been modified to accommodate that information.
Automobile Program Accreditation FAQ’s
11. How will I articulate my program?
NATEF does not define how credit transfer is structured between
institutions.
We are working on some suggested guidelines.
You should discuss articulation directly with your partner institution
as you plan implementation of the new model.
Start Planning Your Action This Week!
We Actually Began at WATDA SI 2012
and at WTEA Conference 2013
Using the Team Wisconsin® System
for NATEF Accreditation
Designed by Carl Hader (TECS,llc 2013)
To Meet the New NATEF Model 2013 & Beyond
2012 NATEF Task Area A-0
Required Supplemental Tasks
• A. Shop and Personal Safety
• B. Tools and Equipment
• C. Preparing Vehicle for Service
All Tasks
are
P-1
• D. Preparing Vehicle for Customer
Typical Rubric for NATEF Competencies
1 = Demonstrated Exposure and has observed the competency
2 = Applies the competency but only mastered a few essential attributes
3 = Capable of the competency but needs further practice
4 = Performs the competency satisfactorily [Proficient]
5 = Mastered the competency [Exemplary]
2012 NATEF Task Area A-1
Engine Repair
• A. General Engine Diagnosis; Removal & Reinstallation
• B. Cylinder Head and Valve Train Diagnosis & Repair
• C. Engine Block Assembly Diagnosis & Repair
• D. Lubrication and Cooling System Diagnosis & Repair
Typical Rubric for NATEF Competencies
1 = Demonstrated Exposure and has observed the competency
2 = Applies the competency but only mastered a few essential attributes
3 = Capable of the competency but needs further practice
4 = Performs the competency satisfactorily [Proficient]
5 = Mastered the competency [Exemplary]
2012 NATEF Task Area A-2
Automatic Transmission
• A. General Transmission & Transaxle Diagnosis
• B. Transmission & Transaxle Maintenance & Adjustment
• C. In-Vehicle Transmission & Transaxle Repair
• D. Off-Vehicle Transmission & Transaxle Repair
Typical Rubric for NATEF Competencies
1 = Demonstrated Exposure and has observed the competency
2 = Applies the competency but only mastered a few essential attributes
3 = Capable of the competency but needs further practice
4 = Performs the competency satisfactorily [Proficient]
5 = Mastered the competency [Exemplary]
2012 NATEF Task Area A-3
Manual Drive Trains & Axles
• A. Clutch Diagnosis & Repair
• B. Manual Transmission & Transaxle Diagnosis & Repair
• C. Drive Shaft, Half-Shaft, Universal & CV Joint D & R
• D. Drive Axle Diagnosis & Repair
• E. Four-Wheel & All-Wheel Drive Component D & R
Typical Rubric for NATEF Competencies
1 = Demonstrated Exposure and has observed the competency
2 = Applies the competency but only mastered a few essential attributes
3 = Capable of the competency but needs further practice
4 = Performs the competency satisfactorily [Proficient]
5 = Mastered the competency [Exemplary]
2012 NATEF Task Area A-4
Suspension, Steering, Alignment
• A. Steering System Diagnosis & Repair
• B. Suspension System Diagnosis & Repair
• C. Wheel Alignment Diagnosis & Adjustment
• D. Wheel & Tire Diagnosis & Repair
Typical Rubric for NATEF Competencies
1 = Demonstrated Exposure and has observed the competency
2 = Applies the competency but only mastered a few essential attributes
3 = Capable of the competency but needs further practice
4 = Performs the competency satisfactorily [Proficient]
5 = Mastered the competency [Exemplary]
2012 NATEF Task Area A-5
Brake Systems
• A. General Brake System Diagnosis
• B. Hydraulic System Diagnosis & Repair
• C. Drum Brake Diagnosis & Repair
• D. Disc Brake Diagnosis & Repair
• E. Power Assist Diagnosis & Repair
• F. Wheel Bearing, Parking Brake, Electrical D & R
• G. Anti-lock Brake & Traction Control Systems
2012 NATEF Task Area A-6
Electrical & Electronic Systems
• A. General Electrical System Diagnosis
• B. Battery Diagnosis & Service
• C. Starting System Diagnosis & Repair
• D. Charging System Diagnosis & Repair
• E. Lighting System Diagnosis & Repair
• F. Gauges, Warning Devices, Instrument Cluster D & R
• G. Horn, Wiper and Washer Diagnosis & Repair
• H. Accessory Diagnosis & Repair
2012 NATEF Task Area A-7
Heating, Ventilation, and A/C
• A. A/C System Diagnosis & Repair
• B. Refrigeration System Component D & R
• C. Heating, Ventilation & Engine Cooling
• D. Operating Systems & Related Controls
• E. Refrigerant Recover, Recycle & Handle
Certification in Auto Maintenance & Light Repair is
slightly different from other ASE certifications.
If you pass the G1 exam, and have at least one year of
hands-on working experience in auto maintenance and
light repair (half may be met by appropriate vocational
training), you will be certified in this area.
The G1 test contains 55 scored questions, plus 10
unscored research questions, and you will have 1 1/2
hours (90 minutes) to complete it.
The questions, written by service industry experts
familiar with all aspects of maintenance and light repair,
are entirely job-related.
They test skills you need to know to do the job;
theoretical knowledge is not covered.
A. Engine Systems (9 questions)
1. Verify driver’s complaint and/or road test vehicle; determine necessary
action.
2. Utilize service manuals, technical service bulletins (TSBs), and product
information.
3. Inspect engine assembly for fuel, oil, coolant, and other leaks; determine
necessary action.
4. Check for abnormal engine noises.
5. Inspect and replace pans and covers.
6. Change engine oil and filter; reset oil life monitor.
7. Inspect and test radiator, heater core, pressure cap, and coolant recovery
system; determine needed repairs; perform cooling system pressure and dye
tests.
8. Inspect, replace, and adjust drive belt(s), tensioner(s), and pulleys.
9. Inspect and replace engine cooling system and heater system hoses, pipes,
and fittings.
10.Remove and replace engine thermostat and coolant bypass.
11.Inspect and test coolant; drain, flush, and refill cooling system with
recommended coolant; bleed air as required.
A. Engine Systems (9 questions)
12. Inspect and replace accessory belt driven water pumps.
13. Confirm fan operation (both electrical and mechanical); inspect fan clutch,
fan shroud, and air dams.
14. Verify operation of engine-related warning indicators.
15. Perform air induction/ throttle body service.
16. Inspect, service, or replace air filter(s), filter housing(s), and intake system
components.
17. Inspect and replace crankcase ventilation system components.
18. Inspect exhaust system for leaks; check hangers, brackets, and heat shields;
determine needed repairs.
19. Retrieve and record diagnostic trouble codes (DTCs).
20. Remove and replace spark plugs; inspect secondary ignition components for
wear or damage.
21. Inspect fuel tank, filler neck, fuel cap, lines, fittings, and hoses; replace
external fuel filter.
22. Inspect canister, lines/hoses, mechanical and electrical components of the
evaporative emissions control system (EVAP).
23. Check and refill diesel exhaust fluid (DEF).
B. Automatic Transmission/Transaxle (4 questions)
1.
2.
3.
4.
5.
6.
7.
Road test the vehicle to normal operation; retrieve and record diagnostic
trouble codes (DTCs).
Determine fluid type, level, and condition.
Inspect transmission for leaks; replace external seals and gaskets.
Inspect and replace CV boots, axles, drive shafts, U-joints, drive axle joints,
and seals.
Visually inspect condition of transmission cooling system, lines, and fittings.
Inspect and replace powertrain mounts.
Replace fluid and filter(s).
C. Manual Drive Train and Axles (6 questions)
1.
2.
3.
4.
5.
Inspect, adjust, replace, and bleed external hydraulic clutch slave/release
cylinder, master cylinder, lines, and hoses; clean and flush hydraulic system;
refill with proper fluid.
Inspect and replace power train mounts.
Inspect, adjust, and replace transmission/transaxle external shifter assembly,
shift linkages, brackets, bushings/grommets, pivots, and levers.
Inspect and replace external seals.
Check fluid level; refill with fluid.
C. Manual Drive Train and Axles (6 questions)
►Drive Shaft, Half-Shaft, and Universal Joints/Constant Velocity
(CV) Joint (Front and Rear Wheel Drive)
6.
7.
8.
9.
Road test the vehicle to verify drive train noises and vibration.
Inspect, service, and replace shafts, yokes, boots, universal/CV joints; verify
proper phasing.
Inspect, service, and replace drive shaft center support bearings.
Inspect, service, and replace wheel bearings, seals, and hubs, excluding
press-type bearings.
C. Manual Drive Train and Axles (6 questions)
► Rear Wheel Drive Axle Inspection
10.
11.
12.
13.
Identify fluid leakage problems.
Inspect, drain, and refill with lubricant.
Inspect and replace rear axle shaft wheel studs.
Inspect axle housing and vent; inspect rear axle mountings.
C. Manual Drive Train and Axles (6 questions)
► Four Wheel Drive
14. Inspect, adjust, and repair transfer case manual shifting mechanisms,
bushings, mounts, levers, and brackets.
15. Check transfer case fluid level and inspect condition; drain and refill with
fluid.
16. Inspect, service, and replace front drive/propeller shaft and universal/CV
joints.
17. Inspect front drive axle universal/CV joints and drive/half shafts, axle seals,
and vents.
18. Inspect front wheel bearings, seals, and hubs.
19. Inspect transfer case, front differential, and axle seals and vents.
20. Inspect tires for correct size for vehicle application; check for wear.
21. Retrieve and record diagnostic trouble codes (DTCs).
D. Suspension and Steering (13 questions)
1.
2.
3.
4.
5.
6.
7.
8.
Disarm airbag (SRS) system.
Check power steering fluid level; determine fluid type and adjust fluid level;
identify system type (electric or hydraulic).
Inspect, adjust, and replace power steering pump belt(s), tensioners and
pulleys; verify pulley alignment.
Identify power steering pump noises, vibration, and fluid leakage.
Remove and replace power steering pump; inspect pump mounting and
attaching brackets; remove and replace power steering pump pulley; transfer
related components.
Inspect and replace power steering hoses, fittings, O-rings, coolers, and
filters.
Inspect and replace rack and pinion steering gear bellows/boots.
Flush, fill, and bleed power steering system.
D. Suspension and Steering (13 questions)
► Steering Linkage
9.
Inspect, adjust (where applicable), and replace pitman arm, center link (relay
rod/ drag link/intermediate rod), idler arm(s) and mountings.
10. Inspect, replace, and adjust tie rods, tie rod sleeves/adjusters, clamps, and
tie rod ends (sockets/bushings).
11. Inspect and replace steering linkage damper(s).
D. Suspension and Steering (13 questions)
► Front Suspension
12. Identify front suspension system noises, handling, ride height, and ride
quality concerns; disable air suspension system.
13. Inspect upper and lower control arms, bushings, and shafts.
14. Inspect and replace rebound and jounce bumpers.
15. Inspect track bar, strut rods/radius arms, and related mounts and bushings.
16. Inspect upper and lower ball joints (with or without wear indicators).
17. Inspect non-independent front axle assembly for damage and misalignment.
18. Inspect front steering knuckle/spindle assemblies and steering arms.
19. Inspect front suspension system coil springs and spring insulators (silencers).
20. Inspect front suspension system leaf spring(s), leaf spring insulators
(silencers), shackles, brackets, bushings, center pins/bolts, and mounts.
21. Inspect front suspension system torsion bars and mounts.
22. Inspect and replace front stabilizer (sway) bar bushings, brackets, and links.
23. Inspect front strut cartridge or assembly.
24. Inspect front strut bearing and mount.
25. Identify noise and service front wheel bearings/hub assemblies.
D. Suspension and Steering (13 questions)
► Rear Suspension
26. Identify rear suspension system noises, handling, and ride height concerns;
disable air suspension system.
27. Inspect rear suspension system coil springs and spring insulators (silencers).
28. Inspect rear suspension system lateral links/arms (track bars), and control
(trailing) arms.
29. Inspect and replace rear stabilizer bars (sway bars), bushings, and links.
30. Inspect rear suspension system leaf spring(s), leaf spring insulators
(silencers), shackles, brackets, bushings, center pins/bolts, and mounts.
31. Inspect and replace rear rebound and jounce bumpers.
32. Inspect rear strut cartridge or assembly, and upper mount assembly.
33. Inspect non-independent rear axle assembly for damage and misalignment.
34. Inspect rear ball joints.
35. Inspect and replace rear tie rod/toe linkages.
36. Inspect rear knuckle/spindle assembly.
37. Inspect and replace shock absorbers, mounts, and bushings.
38. Identify noise and service rear wheel bearings/hub assemblies.
D. Suspension and Steering (13 questions)
► Wheel Alignment
39. Identify alignment-related symptoms such as vehicle wander, drift, and pull.
40. Perform pre-alignment inspection; prepare vehicle for alignment, and
perform initial wheel alignment measurements.
41. Measure front and rear wheel camber; adjust as needed.
42. Measure caster; adjust as needed.
43. Measure front wheel toe; adjust as needed.
44. Center the steering wheel using mechanical methods.
45. Measure rear wheel toe; adjust as needed.
46. Measure thrust angle.
47. Calibrate steering angle sensor
D. Suspension and Steering (13 questions)
► Wheel and Tires
48. Identify tire wear patterns.
49. Inspect tire condition, tread depth, size, & application (load & speed ratings).
50. Check and adjust tire air pressure. Utilize vehicle tire placard and
information.
51. Diagnose wheel/tire vibration, shimmy, and noise concerns; determine
needed repairs.
52. Rotate tires/wheels and torque fasteners/wheel locks.
53. Dismount and mount tire on wheel.
54. Balance wheel and tire assembly.
55. Identify and test tire pressure monitoring systems (TPMS) (indirect and
direct) for operation. Verify instrument panel lamps operation; conduct
relearn procedure.
56. Repair tire according to tire manufacturers’ standards.
E. Brakes (11 questions)
1.
2.
3.
4.
5.
6.
7.
Check for poor stopping, pulling, dragging, noises, high or low pedal, and
hard or spongy pedal.
Check the master cylinder fluid level and condition; inspect for external fluid
leakage.
Inspect flexible brake hoses, brake lines, valves, and fittings for routing, leaks,
dents, kinks, rust, cracks, or wear; inspect for loose fittings and supports;
determine needed repairs.
Verify operation of brake warning light and ABS warning light; inspect brake
system wiring damage and routing.
Test parking brake indicator light, switch, and wiring.
Bleed and/or flush hydraulic system.
Select, handle, store, and install proper brake fluids.
E. Brakes (11 questions)
► Drum Brakes
8.
9.
10.
11.
12.
13.
14.
15.
16.
Remove, clean, inspect, and measure brake drums; follow manufacturers’
recommendations in determining need to machine or replace.
Machine drums according to manufacturers’ procedures and specifications.
Using proper safety procedures, remove, clean, and inspect brake
shoes/linings, springs, pins, self-adjusters, levers, clips, brake backing
(support) plates, 7 other related brake hardware; determine needed repairs.
Lubricate brake shoe support pads on backing (support) plate, self-adjuster
mechanisms, and other brake hardware.
Inspect wheel cylinder(s) for leakage, operation, and mounting; remove and
replace wheel cylinder(s).
Install brake shoes and related hardware.
Adjust brake shoes and parking brake.
Check parking brake system operation; inspect cables and components for
wear, rust, and corrosion; clean or replace components as necessary;
lubricate and adjust assembly.
Reinstall wheel, torque lug nuts, make final brake checks and adjustments.
E. Brakes (11 questions)
► Disc Brakes
17. Retract integral parking brake caliper piston(s) according to manufacturers’
recommendations.
18. Remove caliper assembly from mountings; inspect for leaks and damage to
caliper housing.
19. Clean and inspect caliper mountings and slides/pins for wear and damage.
20. Remove, clean, and inspect pads and retaining hardware; determine needed
repairs, adjustments, and replacements.
21. Clean caliper assembly; inspect external parts for wear, rust, scoring, and
damage; replace any damaged or worn parts; determine the need to repair
or replace caliper assembly.
22. Clean, inspect, and measure rotors with a dial indicator and a micrometer;
determine the need to index, machine, or replace the rotor.
23. Remove and replace rotors.
24. Machine rotors, using on-car or off-car method.
E. Brakes (11 questions)
► Disc Brakes
25. Install pads, calipers, and related attaching hardware; lubricate components;
bleed system.
26. Adjust calipers with integral parking brakes.
27. Fill master cylinder with recommended fluid; reset system; inspect caliper for
leaks.
28. Reinstall wheel, torque lug nuts, and make final brake checks and
adjustments.
29. Road test vehicle and burnish/break-in pads according to manufacturers’
recommendations.
E. Brakes (11 questions)
► Power Assist Units
30. Test brake pedal free travel with and without engine running to check power
booster operation.
31. Check vacuum supply (manifold or auxiliary pump) to vacuum-type power
booster.
32. Inspect the vacuum-type power booster unit for operation, and vacuum
leaks; inspect the check valve for proper operation.
33. Identify operation of electric-hydraulic assist system; check system for leaks
and operation.
34. Identify operation of hydro-boost assist system; check system for leaks and
operation.
F. Electrical (8 questions)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Disarm/re-enable air bag; verify lamp operation.
Check voltages, grounds, and voltage drops in electrical circuits; interpret
readings.
Check current flow in electrical circuits and components; interpret readings.
Check continuity and resistances in electrical circuits and components;
interpret readings.
Perform battery tests (load and capacitance); determine needed service.
Maintain or restore electronic memory functions.
Inspect, clean, fill, or replace battery.
Perform slow/fast battery charge in accordance with manufacturers’
recommendations.
Inspect, clean, and repair or replace battery cables, connectors, clamps, and
hold-downs.
Jump start a vehicle with a booster battery or auxiliary power supply.
Perform starter current draw test; interpret readings.
Inspect switches, connectors, and wires of starter control circuits.
Remove and replace starter.
F. Electrical (8 questions)
14. Perform charging system output test and identify undercharge, no charge, or
overcharge condition.
15. Inspect, adjust, and replace generator (alternator) drive belts, pulleys, and
tensioners.
16. Remove, inspect, and replace generator (alternator).
17. Inspect, replace, and aim headlights/bulbs and auxiliary lights (fog
lights/driving lights).
18. Inspect interior and exterior lamps and sockets; repair as needed.
19. Inspect lenses; determine needed repairs.
20. Verify instrument gauges, warning/indicator light operation; reset
maintenance indicators.
21. Verify horn operation; determine needed repairs.
22. Verify wiper and washer operation; replace wiper motor, blades, and washer
pump as needed.
G. Heating, Ventilation, and Air Conditioning (4 questions)
1.
2.
3.
4.
5.
6.
Verify HVAC operation (vent temperature, blower and condenser fan,
compressor engagement, blend and mode door(s) operation).
Visually check A/C components for signs of leaks.
Inspect A/C condenser for restricted air flow.
Inspect and replace cabin air filter.
Check drive belt for wear and tension; adjust or replace as needed.
Inspect and clean evaporator drains.