Transcript Control Equipment Ltd XP95 Compatible Panel Ranges

An Introduction to the
R3 19 inch Rack
The R3 control system comprises a number of different
plug in modules, each of which is dedicated to a
particular function within the complete control panel.
Modules cover all requirements -
Fire detection
Alarm signalling
Gas detection
Extinguishing
Data transmission
Plant control
The modular approach means that the system is
inherently reliable, easy to install and commission and
easy to maintain, repair and fault find.
Common Control Module
Every R3 system must contain a Common
Control Module.
This module incorporates all executive action
user controls.
There are two types K1321 - Conventional systems only
K1339 - Both analogue addressable and
conventional systems
The Common Control Module is always fitted in
the right hand module position of its designated
rack.
K1339 Common Control Module
•User Controls
•System Messages
•User Indications
•Engineer Functions
•Printer Output
•Event Memory
•Network Data Output
K1339 Common Control Module
User Controls
•Silence Alarms
•Reset System
•Test Alarms
•Silence Buzzer
•Test Lamps
K1339 - Silence Alarms
Press Key 1
Alarms silence
“Alarms Silenced”
indicator lights
Panel buzzer sounds
K1339 - System Reset
Press Key 2
Message display
clears
“Alarms Silenced”
indicator goes out
Buzzer stops
System is reset
K1339 - 1 Fire Message
Event message shows
loop number and device
address with device type
and status in line 1.
Second line is a user
defined description of
the area where the
device is located.
K1339 - 2 Fire Messages
First event remains in
lines 1 and 2.
Second event is shown
in lines 3 and 4.
(Example shown where
smoke is detected on
stairs and a break glass
is operated later.).
K1339 - Further Events
First event remains in
lines 1 and 2.
Second event is shown
in lines 3 and 4.
“More Data” LED is lit.
Pressing key 6 scrolls
next event into lines 3
and 4.
K1339 - More Data Display
First event remains in
rows 1 and 2 of display.
Pressing key 6 scrolls
later events into the
bottom 2 lines until all
events have been viewed.
K1339 Common Control Module
Engineer Controls
(via Access Code)
•Time and Date
•Text Messages
•Device Isolate
•Printer Dump
•Memory
K1339 Common Control Module Engineer Controls
Text Messages
•Sensors
•Zones
•Indication Zones
•Inputs
K1339 Common Control Module Engineer Controls
Device Isolate
•Single / Range Isolate
•Single / Range De-isolate
•De-isolate All
•List Isolations
•Print Isolations
K1339 Common Control Module Engineer Controls
Printer
•Printer Dump
•Clear Print Queue
•Normal Print
•Reverse Print
K1339 Common Control Module
Event Memory
•View All Events in
Reverse Order