Transcript Slide 1

Frequently requested Parts
Complete Intensifiers
•
•
•
•
•
As replacements for worn out top works
For upgrading of existing intensifiers
As exchange top works for easier maintenance
60 K, Hi Load Piston, Pre Seated heck Valve
Other configurations available on request
Mechanical shift intensifier
• Mechanical Shift Intensifier
60K, H2O 2pc Check valve, Hi Load
#301020-1-3-HL = CPN 20458692
• ……..€
• Electronic Shift Intensifier
60K, H2O 2pc Check valve, Hi Load
#301020-3-3-HL = CPN 20458686
• ……..€
• Intensifier
60K, H2O 2pc Check valve, Hi Load
#301003-3-3-HL = CPN 20458728
• ……..€
Replacement parts for the high pressure section
•
HP Cylinder 60K
strain Hardened, crack protected
thread, solid lubricated
…… €
• End Cap Assembly 60K
…… €
Replacement parts for the high pressure section
• Plunger 60K
sollid one piece design,
mirror smooth finish
…… €
• High Pressure seal kit
….. €
Replacement parts for the high pressure section
•
Check Valve Assembly 60K
two piece poppet design for
smoother shifting,
outlet body fits through end cap
bore
….. €
• Check valve repair kit
….. €
Replacement parts for the hydraulic section
• Hydraulic Cylinder 60K / 40K
…… €
• Hydraulic piston Hi Load
With teflon wear bands to
prevent rocking and reduce
friction
…… €
Replacement parts for the hydraulic section
• End bell assemblies
…. €
Replacement parts for the hydraulic section
• Hydraulic seal Kit
….. €
• Hi Load Piston Seal Kit
….. €
Hydraulic Bleed Down Valve
• Hydraulic bleed down valve
…. €
• Hydraulic Bleed down valve
repair kit
….. €
Tool Kits
• Pump service tool kit
…. €
• Big tubing tool kit
for coning, threading and bending
1/4” ; 3/4” ; 9/16”
….. €
Cuting Head Assembly for abrasive cutting
• On/Off Valve assembly with
adjustable P-III nozzle body &
Short Stop Filter = 20467973
…….€
• Single port RH- IDEs
for 7.14 mm focusing tubes
0.25 mm = 20479369
0.33 mm = 20479381
0.35 mm = 20479385
…. €
• Focusing tubes 76 mm long
Conversion to pure water cutting head
• P-III nozzle nut
…. €
• Standard nozzles
(sapphire)
…..€
Cutting Head Maintenance Kits
• On/Off Valve repair Kit
……. €
• Actuator repair Kit
…. €
Special Cutting Head Technology
• Ultra Valve
• Mini Valve
• 6000 bar
(94K)
Cutting head
Adaptors to Connect our IDE to other valves
Adaptors to Connect our IDE to OMAX valves