Transcript Dia 1 - Senco

Product Information
Presentation
[email protected] www.verpa-senco.com

General information
 What fastener to use in what concrete:
Thickness of Material
+ Penetration Depth
= Fastener Length
2
[email protected] www.verpa-senco.com
 Cubical pressure
 Cube of 150x150x150 mm
 Tested until it breaks to meausure
strength
 2nd number in the concrete class
C16/20
 A cube is stronger than a cilinder, there
for a smaller object is used.
3
[email protected] www.verpa-senco.com
 Cylindrical pressure
 Cilinder of 150x300 mm
 Tested until it breaks to meausure
strength
 1st number in the concrete class
C16/20
 A cylinder is weaker than a cube.
4
[email protected] www.verpa-senco.com
 What fastener to use in what concrete
Thickness of Material (Examples)
Concrete
Class
Recommended
Penetration Depth
1mm Steel Stud
3mm Steel Stud
10mm Wood
C16/20
25-28mm
25 / 32
32
38
C20/25
20-22mm
22
25
32
C25/30
15-20mm
19
19 / 22
25 / 32
C30/37
15-18mm
19
19 / 22
25
C40/50
13-16mm
15
19 / 22
25
C50/60
12-15mm
15
15
22 / 25
Premium pins advised
 In steel structure beams (max 650 N/mm2):
 always use premium pins.
 Max penetration depth = 6.5 mm
5
[email protected] www.verpa-senco.com

Fastener range various concrete classes
Recommended penetration depth
35
30
25
20
min
max
15
10
5
0
C12/15
C16/20
6
[email protected] www.verpa-senco.com
C20/25
C25/30
C28/35
C30/37
C35/45
C40/50
C50/60
7
[email protected] www.verpa-senco.com

On site concreting
can lead to more
pebble-stones on the
bottom than on the
top side.
In such a case, on the
ceiling side you need
premium pins while
on the floor side to
can use regular pins.
8
[email protected] www.verpa-senco.com
In soft concrete the scoring rate
is high. A normal pin is advised.
In hard concrete the nail can
either bent or deform. This has
an influance on the scoring
rate. Therefor the premium pin
is advised for usage in hard
concrete.
9
[email protected] www.verpa-senco.com

SAP40XP
Steel/Concrete Pinner
 8 bar!
 Unique tool in the market
 Lightweight
 Trigger- and bottomfire
 Long thin nose
 7 nail lengths
 Normal and premium
10
[email protected] www.verpa-senco.com
Net weight:
Nail capacity:
Drive power:
Operating press.:
3,2 kg
42 pins
90 J
5,5 – 8,3 bar
Fastener range:
Diameter:
Fastener length:
Collated pins
2,6 – 3,0 mm
15 – 40 mm

SGP40
Steel/Concrete Pinner
 Cordless convenience
 Comfort grip
 Long thin nose
 7 nail lengths
 Normal and Premium
 High voltage ignition
11
[email protected] www.verpa-senco.com
Net weight:
Nail capacity:
Drive power:
Drive time:
Battery capacity:
4 kg
42 pins
90 J
2 shots/second
5200 shots
Fastener range:
Diameter:
Fastener length:
Fuel cell:
Collated pins
2,6 – 3,0 mm
15 – 40 mm
GC0012

SGP40S (2nd generation):
 Short Magazine
(22 pins fitting the magazine)
 Block Out System
 Magazine “Quick Release”
 Depth of Drive Control
 FIRST toolless “step free”
DOD Control on a Concrete Pinner
 Easy-Nail-Clear Magazine
 Magazine “Quick Release”
 Optional long magazine
Net weight:
Nail capacity:
Drive power:
Drive time:
Battery capacity:
Fastener range:
Diameter:
Fastener length:
INTRODUCTION Fuel cell:
12
[email protected] www.verpa-senco.com
3,9 kg
22 pins
90 J
2 shots/second
5200 shots
Collated pins
2,6 – 3,0 mm
15 – 40 mm
GC0012

Regular concrete pins
 7 nail lengths
(15, 19, 22, 25, 32, 38, 40 mm)
5 micron zinc, like nails

Premium pins
(Hardened pins for hard concrete)
 7 nail lengths
(15, 19, 22, 25, 32, 38, 40 mm)
5 micron zinc, like nails
13
[email protected] www.verpa-senco.com

Fuel cells
 Single cell GC0012
1.300 shots, 80 ml
 Premium fuel cell PC1274
1.300 shots, 80 ml, works from -15°C
14
[email protected] www.verpa-senco.com

Fuel cells
 Blisterpack PC1254
750 shots, 2x40 ml + adaptor
15
[email protected] www.verpa-senco.com
 Car adaptor PC1196 12V
for charging you batteries in the car
 Gas tool cleaning kit
For keeping your tool in perfect condition
16
[email protected] www.verpa-senco.com
There is no specific standard for
concrete fixing.
Only test certificates of competetion
exist.
17
[email protected] www.verpa-senco.com
Brand
Model no.
SENCO
SENCO
SPIT
POWERS/MAX
HILTI
SGP40
SGP40S/L
PULSA 700P
C3 - 55010
GX120
90J
90J
100J
90J
100J
15-40 mm
15-40 mm
15-40 mm
15-40 mm
15-40 mm
Actuation Type
Full Sequential
Full Sequential
Full Sequential
Full Sequential
Pin Head Type
Round Head
Round Head
Round Head
Round Head
Round Head
Drive Power
Pin Length Range
Straight and Step
Straight and Step
Straight and Step
Straight and Step
Straight and Step
Magazine Capacity
42 pins
22 / 42pins
20 pins
42 pins
40 pins
Drives per Fuel Cell
1200
1200
650
1200
750
Fuelcell Composition
Propylene Butane
Synthetic
(Propylene Glycol)
-
MAPP Formulation
Propylene Isobutane
Fuel Lubrication
Propylene Butane
Synthetic
(Propylene Glycol)
-
-
Net Fuel per Cell
40 gr/80ml
40 gr/80ml
20gr/40ml
34gr/68ml
34gr/68ml
165 mm
165 mm
115 mm
-7°C
-7°C
150 mm
-11°C
Ni-MH 6V
Ni-MH 6V
2
2
2
2
5200
5200
1500
5700
Pin Shank Types
Dimensions Fuelcell
Lowest Operating Temp.
Battery Type
Batteries
Drives per Charge
Charge Time
Max Cycle Rate
Warranty
Ni-MH
50000
2 Hours
2 Hours
1 Hour
2 Shots/second
2 Shots/second
2 Shots/second
2 Shots/second
4
3,9
3.6kg
-
3.8kg
458x139x460
458x138x340
383x295x100 mm
-
432x394x133 mm
2 Year Limited
2 Year Limited
-
-
2 Year
Tool Weight
Dimensions
NiCD 6V 600mAh
-11°C
Disposable - 2AA
Electric ignotion
18
[email protected] www.verpa-senco.com
-
 Overview Senco concrete pins as an
alternative for Paslode:
SENCO PINS
PASLODE PINS
-
C6
Regular Pins
SC6
Premium Pins
HC6
19
[email protected] www.verpa-senco.com
Metal(stud) on steel
20
[email protected] www.verpa-senco.com
Metal on steel
21
[email protected] www.verpa-senco.com
Wood on concrete
In concrete minimum distance
from the edge is > 76,2 mm.
Minimum distance between
nails > 102 mm.
22
[email protected] www.verpa-senco.com
Metal(stud) on concrete
23
[email protected] www.verpa-senco.com
Metal on stone
24
[email protected] www.verpa-senco.com

For fastening single shot attachements
Pins can fix several attachements like:




Washers
Metal clips
Plastic clips
Perfo band
25
[email protected] www.verpa-senco.com
Metal on brick. When using the attachment and
a washer, the metal profile is still adjustable to
make it vertical aligned.
After that, fix the profile in the corners.
26
[email protected] www.verpa-senco.com
27
[email protected] www.verpa-senco.com
Plastic on concrete.
28
[email protected] www.verpa-senco.com
29
[email protected] www.verpa-senco.com
For all these you can
of course also use a
Pneumatic version.
30
[email protected] www.verpa-senco.com
Nail not deep enough
- Nail too long
- DOD setting not correct (SGP40S/L)
- Increase pressure (SAP40)
Nail too deep
- Nail too short
- DOD setting not correct (SGP40S/L)
- Reduce pressure (SAP40)
31
[email protected] www.verpa-senco.com
Nail bends
- Hard concrete / big pebble stones
- Steel reinforcement direct under surface
- Hard surface (steel)
Nail not deep enough in steel
- Steel too hard
32
[email protected] www.verpa-senco.com
Nail won’t stay in material
- Base material not thick enough
(> 5mm)
Nail breaks
- Base material too hard
- Nail too long
33
[email protected] www.verpa-senco.com
Q
A
Fit the Senco pins in other tools
Yes, they fit (except for Hilti or unknown brands)
Q
A
Fit Senco gas in other tools
Yes, it fits (PC1254 is universal), gas fuel is
lubricant and gives no negative result
(even more shots are possible)
Q
A
Which nail to be used for which application
Use the table (advice, always test on site)
Q
A
What service needs to be done on the tools?
Tool needs to be proper managed, and needs
cleaning (interval depending on use)
34
[email protected] www.verpa-senco.com