PERFORATOR - DRILING
Download
Report
Transcript PERFORATOR - DRILING
Exportinitiative erneuerbarer
Energien
Belgrad, 25.09.2012
Wolfgang Waide
Sales Manager Drillpipes
Perforator GmbH
www.perforator.de
Contents
Company profile
Products of Perforator GmbH
Targets in Serbia
Our company
Since 1980, we are producing, among other Equipment,
Drillpipes in various versions
From our base in Walkenried we are manufacturing and
distributing this drillpipes worldwide.
During the time, our plant was always modernized and
optimized in order to increase the capacities and to improve
our quality.
Since 2002, Perforator is an independent company under the
umbrella of the Schmidt-Kranz Holding Germany.
Managing Director is Mr. Wolfgang Schmidt.
Currently, 150 dedicated and qualified staff are employed with
us and ensure that our products are comply with the quality of
our production and are delivered on time.
Our company
Furthermore, Perforator has a worldwide network of reliable
partners, that provide our customers with advice and
assistance.
We are currently represented in:
Australia, Bulgaria, France, Columbia, Norway, Poland,
Romania, Russia, Spain, Turkey und UK.
We are constantly expanding on the lookout for new partners
and representatives for our distribution network.
Our company
Of course, we are API certified and also have all technical
approvals which are necessary to produce drillpipes, including
DIN ISO 9001:2008 certification.
As we purchase our raw material from Europe, we can
guarantee the highest quality and satisfy so our customers to
the highest degree.
Here is an excerpt of our previous customers:
Aramco – Saudi Arabia
Atlas Copco – Sweden
Gaz de France – Germany
Itag Tiefbohr – Germany
Petrobras – Brasil
RAG – Austria
Rotary Drilling - Hungaria
Our company
Plant in Walkenried
Our products
Perforator Drillpipes
7-0051
PERFORATOR Drillpipes
Product spectrum
I.
II.
III.
IV.
V.
VI.
Standard Drillpipes
Special - Drillpipes
Drillpipes for Waterwells
Ingersoll-Rand Drillpipes
Drillpipes for horizontal drilling
API – Oil- und Gasfield drill pipes
PERFORATOR Drillpipes
Features
Friction welded design up to ø168,3 mm
Quenched and tempered tool joint material
Thread nitrated or manganes phosphated
Heat treatment after friction welded
Drillpipes with more than ø168,3 mm will
stick welded (semiautomatic)
Typical features
Standard Drillpipes
Smooth outer diameter
With or without flats
Conical or cylindrical threads
for Rotary Drilling wall thickness up to 12,5 mm
for DTH Hammer Drilling 4 – 8,8 mm
PERFORATOR
Standard Drillpipes
Examples: VB 3000, VB 1147
With flats
Without flats
For hydraulic Make/break
PERFORATOR
Special Drillpipes
Special threads and/or special design to
Customer request
Example:
VB 1146
Air lift pipes (RC double wall pipes)
PERFORATOR
Drillpipes for Waterwells
typical features:
upsetted (Tooljoint-ø > Pipe-ø)
short tooljoint connection
only conical threads
Pipe flush inside
flaps are possible
Examples: VB 488; VB 1145
Ingersoll – Rand Drillpipes
typical features:
API- or BECO threads
Hexagon flats and recess at Box
Square flats and recess at Pin
Example: VB 933; VB 77
API Oil- and Gasfiels
Drill Pipes
Drill pipes
Tool joints
up to 5 1/2“
NC 26 – 5 ½ FH
Features:
upsetted Pipe material
long tool joints
API NC (IF) or FH threads
Upsets: IU; EU oder IEU
Typical Oilfield Drill Pipes
Examples: VPI 410.00.00; VPI 543.00.00
With Hardbanding at Box
Our targets in Serbia
Distribution of our products
Work closely with local
partners/companies to find solutions for
problems
Building of consignment stock
Setup of branch/office in country
We are looking for
Sales partners
Company representatives
Cooperation with companies
PERFORATOR GmbH
Walkenried
Thank you very much
for your Attention !
PERFORATOR GmbH
Walkenried
Perforator GmbH
Wolfgang Waide
Sales Manager Drillpipe
+49 160 9690 5686
[email protected]