Transcript Document

• CAD designed
• MAX OAH = 92”
• MAX OAL = 252”
FORD F550 CHASSIS
•
•
•
•
17,500 GVW
2 and 4 door versions
7.3 Power stroke Diesel
Automatic transmission
BED & BODY
• Aluminum 6061 T-6
Alloy
• 112” body length
• HD under body support
grid
• 2”× 4” Box tubing substructure (.250 wall)
• 6”× 4” angle perimeter
with tapered fronts
• 2 widths available
(dually or super single)
CAGE
• .200 × 1.900 5086 tubing
• 5 part break-a-part design
• Jig built for ease of
replacement
• Allows top removal of tank
Protective Mesh plating
• 5/16” 5052 aluminum plate
• Custom diamond stamped design
WATER TANK
•
•
•
•
Poly material
Life time warranty
400 gallons standard
44” wide × 64” long ×
38” height
• Fill tower
• #70 durometer rubber
isolation plate
• 3 × 3 ¼ aluminum angle
welded onto deck
PUMP
•
•
•
•
•
•
•
•
•
Waterous E-501-A standard
26.5 HP diesel
350 PSI @ 40 GPM
150 PSI @ 100 GPM
Separate 40 amp alternator
2” main inlet
1.5” main outlet
2.5” inlet valve
Other Waterous or Hale pumps
available
PLUMBING
• 2” tank to pump with ¼
turn valve
• Stainless steel discharge
manifold (304-L)
• Straight shot lockable
linkage
• Elkhart controls
• 2.5” inlet valve
BOOSTER REELS
Standard
•
•
•
•
(2) Hannay #SBEF32-23-24
Each with 200’ of ¾” booster
(4) 100’ lengths hose
Hose coupled bar way NST
Optional
• Protection reels
• 50” of ¾” booster
• 3 locations: upper, lower, or
under bed (AS SHOWN)
HOSE TRAY
• (1) 200’ bed of
1.75 pre connect
• Left or right rear
side of bed
COMPARTMENTS
• 40” long × 18” deep × 36”
high
• Aluminum construction
• ¾” OAK tool mounting wall
• Compartment lights
• (1) adjustable shelf
• Magnetic door switches (for
cab door open light)
• Roll-up door (brushed
aluminum)
REAR STEP BUMPER
•
•
•
•
•
•
•
•
Plus 20 degree departure angle
Steel substructure
4-way NFPA slip resistant cover
Lighted recessed license plate
Step lights
Winch power (optional)
Seven pin connector (optional)
Protected FMVSS lighting
modules
WINCH
• 2 – 12 volt night lights
• 95’ of 5/16 cable
• Remote control coil cord
• WARN XI 8000
• Storage options
• 2 – 12 volt plugs
WIRING CENTER
• Weather proof aluminum
construction
• 3003 smooth aluminum powder
coated
• Separate service door
• Chassis key energized system
• Key becomes master switch
LIGHTING
• Whelen “B” link multiplex
system
• Light protected by Brush
guard
• Grille lights
• Bumper lights
• Winch lights
• Rear warning (LED)
• FMVSS rear lower
• Scene lights (3) 12 volt
PUMP PANEL
• .125 Aluminum powder
coating
• Lettered control bezels
• Pump control and gauges
• “T” handle control handles
(locking)
• Water level gauge
• Optional foam level gauge
SHORELINE
• 110 volt Kussmaul auto eject
• 110 volt Kussmaul on board
charger
UNDERBODY SKID PLATES
•
•
•
•
•
Below the oil pan
Under front axle hub
Auto trans
Fuel tank
All painted (X-O rust) black
FOAM SYSTEM
• Foam pro 1600
• Controls on pump
panel
• Class A foam .1 to 1%
• 15 gallon foam cell
Optional
• CAFS
• Dual agent system
FRONT BUMPER
• Plus 20 degree
approach angle
• Alluminum or steel
construction
• 12” channel
• 4” × 4” × ¼” tube
substructure
• Recessed class 3 hitch
and pull points
BRUSH GUARD(S)
• 2.00 × 1.900 5086 tubing
• Nerf bar / running boards
• Lightbar guard
WHEELS AND TIRES
Wheels
• Custom offset 19.5” wheels
• ½” solid centers
• SAE 267 certified (cornering
and radial)
• Wheels painted as standard
(match body)
• Optional jet coat wheels
Tires
•
•
•
•
•
Michelin load range H
285 70R / 19.5 D2 tires
6100 lb rating per tire
105 PSI inflation pressure
Mud and snow tread
CUSTOM CONSOLES
• All aluminum
construction
• Powder coated
• Diagnostic cabinet
• Custom designs
available
GRAPHICS
• Standard equipped with 4”
NFPA stripe
• Optional based on fire district
needs
• Gold leaf
• Scotchlite
• Custom logos
OTHER OPTIONS
• Bumper turrets (remote joy stick
control)
• Tank top storage (up to 8’ available)
• Bumper spray nozzles
• Air systems: breathing, tool, tire fill
• Seven pin connectors
• 120 volt lighting
OTHER OPTIONS
•
•
•
•
•
Water cooler with mounts
Tool storage
Generators
Additional compartments
Mud flaps