Transcript Netronics 5x100 Product Overview

NetStream
Product Family Overview
2
•
NetStream PtP Product portfolio
Carrier-class Point-to-Point Wireless Broadband radios in sub-6 GHz
range
•
Ultra Capacity – up to 200 Mbps net aggregate throughput
•
Native TDM (up to 16 E1s/T1s) + Ethernet over single wireless
platform
•
Extended Range - up to 120 km/75 miles
•
Multi-Band feature - 2.4 GHz & 4.8-6.0 GHz in one radio
•
Extremely Simple to Install – up & running in hours
3
•
NetStream PtP Product portfolio
Advanced Technologies - MIMO, OFDM & Diversity
together with Netronics proprietary air interface
•
Durable & Robust – operation in tough conditions
including nLOS, interference and extreme temperatures
•
1+1 Monitored Hot Standby Support
•
Point-to-Point & Multiple Point-to-Point deployment
configuration available
•
Most competitive price
•
Long range (up to 120Km)
•
Secured and encrypted traffic
•
High Tx Power of 25dBm - high performance with smaller
antennas
•
Multi band (Combo) solution - single product for multiple
bands and regulations
4
NetStream Solution Architecture
ODU
ODU
Radio link
IDU-C
IDU-C
5
Product Spec - ODU
Duplex Technique
TDD
Modulation
OFDM – BPSK/QPSK/16QAM/64QAM, MIMO 2x2
Max Data Rate
Two chains: 130/270 Mbps at 10/20/40 MHz (Up to
100 Mbps FD throughput or 100Mbps
Asymmetric)
Single chain: 65 Mbps at 10/20/40 (Up to 50 Mbps
throughput)
Max Tx Power
25 dBm
Error Correction
FEC k=1/2, 2/3, 3/4, 5/6
Encryption
AES 128
Dimensions
Connectorized: 19.5(w) x 27.0(h) x 8.0(d) cm
Integrated: 37.1(w) x 37.1(h) x 11.0(d) cm
Weight
Connectorized: 1.8 kg / 3.6 lbs
Integrated: 3.5 kg / 7 lbs
Power
Consumption
<35W (ODU+IDU)
Operating
Temperature
Standard: -35°C to +60°C / -31°F to +140°F
Humidity
Up to 100% non-condensing, IP67
6
Product Spec – IDU-C (2)
TDM Interface
Number of Ports
16,8,4 or 0
Type
E1/T1 configurable
Framing
Unframed (transparent)
Timing
Independent timing per port,
Tx and Rx
Connector
RJ-45
Standards Compliance
ITU-T G.703, G.826
Line Code
E1: HDB3 @ 2.048 Mbps, T1:
B8ZS/AMI @ 1.544 Mbps
Latency
Configurable 5-20 msec
Impedance
E1: 120Ω, balanced
T1: 100Ω, balanced
Jitter & Wander
According to ITU-T G.823,
G.824
IDU-C
7
Product Spec - ODU
Ethernet Interface
2 in IDU; 1 in PoE device
Ethernet ports
10/100BaseT with Auto-Negotiation
(IEEE 802.3u)
Framing/Coding IEEE 802.3
Line Impedance 100 Ω
Connector RJ-45
SFP port
Supported via external device
VLAN Support
Transparent
Maximum
Frame Size
2048 Bytes
Latency
3 m/sec (typical)
Power
Feeding
20-60 VDC
Operating
Temperature
0°C to +40°C
Humidity
Up to 95% non-condensing
IDU-C
8
System Components: PoE Units
LAN Interface
Number of Ports
Framing/Coding
Max Frame Size
Latency
Line Impedance
VLAN Support
1
IEEE 802.3/U
2000 Bytes
3 msec (typical at 20MHz channel)
100
Transparent
Connector
RJ-45
Power Feeding
AC/DC, 47-63 Hz
Operating
Temperature
0°C to +40°C
Humidity
Up to 95% non-condensing
PoE Device
9
Product Spec – Antennas
Integrated Antennas
Flat panel 37x37cm
Multi-band 5.x
and 4.9 GHz
Multi-band
2.3-2.4 GHz
23dBi at 5.x GHz
19dBi at 4.9 GHz
8° beam width
Flat panel 37x37cm
17.5dBi
16° beam width
External Antennas
2ft Dish Dual Polarization
Frequency
5.250 - 6.000 GHz
Gain
28 dBi
Diameter
2 ft / 620 mm
Beam Width
H,V: 5o
1ft Flat Panel Dual Polarization
Frequency
2.4 – 2.7 GHz
Gain
19 dBi
Dimensions
37 x 37 cm
Beam Width
16°
10
NetStream Family Portfolio in a
Glance
NetStream Family Portfolio offers three product series:
•
•
•
•
•
•
Netronics 5x200 Series (200 Mbps, 192 Mbps in one direction)
Netronics 5x50 Series (50 Mbps, 45.5 Mbps in one direction)
Netronics 5x36 Series (36 Mbps, 18 Mbps in each direction)
Netronics 5x25 Series (25 Mbps, 22.6 Mbps in one direction)
Netronics 5x10 Series (10 Mbps, 9.2 Mbps in one direction)
Netronics 5x06 Series (12 Mbps, 6 Mbps in one direction)
11
NetStream 5x100-200 Portfolio in a
Glance
Product Series
Through put
Application
NetStream 5x200
100 Mbps net aggregate @ 20 MHz
200 Mbps net aggregate @ 40 MHz
Supports up to 16 E1 lines
IP backhaul
NetStream 5x50
50 Mbps net aggregate @ 20 MHz
Supports up to 8 E1 lines
IP backhaul + TDM
NetStream 5x36
18 Mbps Symmetrical @ 20 MHz
(36 Mbps total in both directions)
Supports up to 4 E1 lines
IP backhaul + TDM
NetStream 5x25
25 Mbps net aggregate @ 20 MHz
Supports up to 3 E1 lines
IP backhaul + TDM
Access
NetStream 5x10
10 Mbps net aggregate @ 20 MHz
Access
NetStream 5x06
12 Mbps Symmetrical @ 20 MHz
(6 Mbps total in both directions)
Access
12
Ethernet Services
•
2 Ethernet interfaces.
•
10/100BaseT with auto-negotiation (IEEE 802.3).
•
Layer 2 Ethernet bridge.
•
Self-learning of up to 512 MAC address (PoE) (IEEE 802.1Q).
•
Self-learning of up to 1024 MAC address (IDU) (IEEE 802.1Q).
•
Up to 100Mbps symmetrical net throughput.
•
VLAN transparent (Management VLAN supported).
•
Latency < 3msec.
•
Retry mechanism for loss-less connection (Fast ARQ).
•
Support up to 2000 bytes frames (all configurations).
13
•
•
•
•
•
•
TDM (E1/T1) Services
1 to 16 E1/T1 interfaces.
Standard E1/T1, compliant with ITU-T standards
Unframed.
BER < 1x10-11 @ sensitivity threshold.
Accurate clock recovery mechanism (<50 PPB).
One way delay < 8msec (typical).
Advanced clock configurations include Multiple
clocks support.
14
Modulations and capacity
Modulation
Air Rate
(Mbps)
Throughput
(Mbps)
TX power
(dBm)
Sensitivity (dBm)
@ BER < 10e-11
(20MHz)
Notes
BPSK ½
6.5
--
25
-88
Installation mode
QPSK ½
13
5
25
-86
Single Mode
QPSK ¾
19.5
7.6
25
-83
Single Mode
16 QAM ½
26
10.3
24
-81
Single Mode
16 QAM ¾
39
15.6
21
-80
Single Mode
64 QAM 2/3
52
21
19
-72
Single Mode
64 QAM ¾
58.5
23.6
18
-70
Single Mode
64 QAM 5/6
65
25.9
18
-67
Single Mode
2X BPSK ½
13
4.9
25
-88
Dual Mode MIMO
2X QPSK ½
26
10.2
25
-86
Dual Mode MIMO
2X QPSK ¾
39
15.5
25
-83
Dual Mode MIMO
2X 16 QAM ½
52
20.8
24
-81
Dual Mode MIMO
2X 16 QAM ¾
78
30.7
21
-80
Dual Mode MIMO
2X 64 QAM 2/3
104
41.3
19
-72
Dual Mode MIMO
2X 64 QAM ¾
117
46.6
18
-70
Dual Mode MIMO
2X 64 QAM 5/6
130
51.7
18
-67
Dual Mode MIMO
15
Netronics 5x200 Series
• Ultra-Capacity
 Up to 100 Mbps Asymmetric Throughput – dynamic traffic
allocation between uplink & downlink based on traffic loads &
air-interface conditions
 Up to 200 Mbps net aggregate throughput in 40 MHz channel
• Optimized for high-capacity IP backhaul applications
• Native TDM (up to 16 E1s/T1s) + Ethernet; Seamless migration from
TDM to all-IP networks
• Superior OFDM, MIMO and Diversity technologies
• Multi-Band feature – 2.4 GHz & 4.8-6.0 GHz frequencies in one radio
• Easy to install, simple to maintain
16
Netronics 5x200 Series
Total Throughput Performance
Asymmetric traffic mode enables
•
Up to double capacity per direction
•
Greater range for given capacity
•
Greater capacity and link robustness per given range
17
Netronics 5x50 Series
• Up to 50 Mbps net aggregate throughput
• Flexible combination of native TDM (up to 16 E1s/T1s) +
Ethernet, supporting converged IP + TDM networks.
• Long range - up to 120 Km/75 miles
• Single radio supporting multiple bands
• Advanced MIMO, OFDM and
Diversity technologies
18
Netronics 5x50 Series
Ethernet Performance
19
Netronics 5x200 Series
Range Performance (E1s)
20
Netronics 5x200 Series
Range Performance (T1s)
21
Best Spectral Efficiency
•
Spectral efficiency is the Throughput per Used Spectrum.
•
Netronics 5x100 achieves best spectral efficiency by:
•
Using MIMO.
•
Adding OFDM sub carriers.
•
Using additional 5/6 coding rate for 64 QAM modulation.
•
By utilizing efficient frame aggregation and increased frame size.
22
Dealing with interferences
•
Patented Air Interface.
•
Directional antennas.
•
ACS (Automatic Channel Selection).
•
Adaptive modulation (automatic adaptive rate).
•
OFDM based air-interface, enabling N-LOS deployments.
•
Diversity mode.
•
Smart FEC.
•
Patented ARQ.
•
HSS (synchronization of multiple links).
•
Configurable jitter buffer.
•
Spectrum Viewer
23
•
•
ACS (Automatic Channel Selection)
Automatic selection of “best-quality” channel (based on PER).
Enhanced robustness and higher performance.
24
•
•
Automatic Adaptive Rate
The system changes air interface rate and modulation
dynamically, depending on radio link conditions.
Benefits:
• Maximization of Ethernet throughput.
• Enhanced robustness.
• Better performance in interference.
25
•
•
•
•
OFDM
OFDM 54 Carriers.
Designed for NLOS deployments.
Enables connectivity via reflections in Radio path.
Enhanced by patented protocol to supports both TDM and ETH services.
54 sub carriers
26
•
•
•
•
•
•
Hub Site Synchronization
No more limitations.
HSS between
• Netronics 5x100 radios.
• NetStream 5x36 radios.
• Netronics 5x100 and NetStream 5x36 radios.
HSS up to 16 radios in a site.
Fully supported by Netronics Manager .
Supported by software upgrade to Netronics 5x100
install base.
All Netronics 5x100 radios in the field are HW ready for
HSS.
27
HSS Applications
Access and Corporate Connectivity
•
•
Where any links originate from a common hub site.
With HSS by Netronics 5x100 such applications now
support high capacity connectivity.
Backhaul
•
•
HSS is needed in installations where a Netronics 5x100 link is the
backhaul for many lower capacity access links.
The backhaul link can be synchronized to the access links to
mitigate potential mutual interference.
HSS Applications
28
Attack Plan
•
•
Identify existing customers with mixed network of NetStream 5x36 and
Netronics 5x100.
Propose the HSS solution for mixed deployment.
29
Monitored Hot Standby (MHS) 1+1
•
Providing redundancy and backup to TDM
services- Targeted for Cellular backhaul.
•
Providing protection against:
• Equipment failure (ODU and IDU).
• Loss of air interface.
•
Using a primary link and a secondary link
can be done with:
• Two Netronics 5x100 links.
• A Netronics 5x100 link and a
NetStream 5x36 link with new IDU-C.
• Two NetStream 5x36 links with new
IDU-C (single dual-pol antenna can be
used).
30
MHS Applications
•
Provide high reliability high-capacity Point-to-Point links.
•
Provide redundancy and high reliability for carrier class operators.
•
Optimized for high capacity links operating in license-free bands.
•
Additional values:
•
Each link can use a different band for maximum protection to the
air interface.
•
Affordable SLA can be offered by protecting part of the Netronics
5x100 trunks with NetStream 5x36.
31
•
•
•
•
•
•
MHS Spec
Supported in Netronics 5x100 by software upgrade to the install base.
TDM service cut-over from the primary to the secondary link is
completely automatic, less than 50 ms.
Automatic restore to primary link as soon as it becomes available.
Supports up to 16 TDM services for Netronics 5x100 and 4 TDM
services for NetStream 5x36.
HSS is used between the links (Install both sites with HSS cables for
additional protection).
Ethernet services
• No Ethernet 1+1
• Ethernet traffic is always “on” on both links, while the TDM service
is running only on one link.
• Each link carries different Ethernet traffic.
• It is possible to aggregate Ethernet capacity with LACP on the
switch
32
Diversity
Diversity
Capacity 25 Mbps
MIMO
Capacity 50 Mbps
Antenna diversity
•
Uses two antennas.
• Each antenna experiences a different interference environment.
• The system chooses the best received signal providing enhanced
robustness.
Diversity
33
Antenna diversity requires antenna separation, possible by two methods:
•
Polarization Diversity - combines a pair of antennas with orthogonal
polarizations.
• Spatial Diversity - employs antennas that are physically separated from
one another.
34
Diversity – Receive Combining
35
Diversity – When to Use
•
MIMO
•
•
•
Use MIMO Mode to get the highest capacity, up to 50 Mbps full duplex.
Use MIMO when the air conditions are similar between the antennas.
Use Diversity instead of MIMO in the following cases:
•
•
•
•
When the system cannot operate in MIMO Mode due to link conditions.
When you get higher capacity in Diversity Mode than in MIMO Mode.
Note that Diversity Mode requires understanding of the nature of
interference and of the correct solution to deploy. Advise PS.
Remember that the capacity in Diversity is ½ than that of MIMO.
36
Spectrum View
•
An RF survey tool
• Support link installation before service activation.
• Activated by the installer.
Helps selecting the best channel during installation.
Supports quick and easy installation.
•
•
37
•
•
•
•
•
•
•
•
•
Spectrum View – Display Information
Spectral measurement for each of the 4 receivers that make the
link.
Spectral power measurements in 5MHz channel granularity.
Current, average and maximum power per channel.
Channels free from radars, with radars and barred (for DFS
bands).
Scanned and un-scanned channels.
Channels selected for ACS.
Current operational channel.
Time stamp of the last spectrum scan.
Zoom, selective view of antennas and sites and detail level.
38
Spectrum View – Tool Capabilities
•
Save and restore – save the spectral information and also view
retrieved spectral information from historical spectrum scans.
Diagnostics - the Spectrum View information is logged as part of the
Diagnostics Information to improve link and system diagnostics and
remote support. It can be retrieved from the Netronics Manager menu
with Help  Get Diagnostic Information.
Management Integration - Spectrum view information is supported in
Netronics MIB and can be used by external Network Management
applications.
Designed for Unlicensed Spectrum – the spectrum measurement
algorithms are designed to show accurate information while
accommodating with variances in frequency, temperature and
interference power and overcoming anomalies that tend to occur in
high interference environments.
Scanning Time – ~10 seconds for an entire band scan. It is
recommended to scan for a few minutes for accurate results.
•
•
•
•
Applications
40
NetStream Applications
IP Backhaul
Cellular Backhaul
High Capacity
Private Networks
Access for Large
Corporations/Institutions
TDM & IP Backhaul

Carrier Class, High capacity backhaul
»
Up to 200Mbps per link to meet rise in demand for bandwidth-intensive applications
»
Asymmetric link
»
QoS & VLANs
41
WiMAX Backhaul

Making broadband available to all – remote, rural and underserved communities
»
nLOS in urban
»
Long haul in rural
WiMAX
Base Station
42
ISP Backhaul
The ultimate high-capacity backhaul solution for any ISP network
»
Providing backhaul for any access solution: WiFi, Point-to-Multiple-Point, Multiple-Point-to-Point,
etc.
»
Complements Netronics comprehensive offering to ISPs
Access Hub
43
Access for large Corporations
Netronics offers a full Corporate Connectivity Portfolio for organizations of any size
»
NetStream 5x06/ 5x10/ 5x25– for small enterprises
»
NetStream 5x36/5x50 – for medium-large enterprises
»
NetStream 5x200 – large to very large enterprises, up to 16E1/50Mbps per customer!
44
High Capacity for Private Networks
NetStream – the solution for High-Capacity Private Networks
»
Large corporations
»
Campuses, health organizations and data-intensive public institutions
45
Video Surveillance backhaul
•
•
•
Backhaul of traffic from aggregation point of multiple cameras sites
Aggregation of traffic from multiple collocated Megapixel video cameras
High capacity transmission with crystalline image quality
46
Thank you
www.netronics-networks.com