Diapositive 1 - Paris Diderot University

Download Report

Transcript Diapositive 1 - Paris Diderot University

Marie Thingaud
Master 2 ILTS
Option TS
23 février 2006
DENTAL PROSTHESES
Sommaire / Contents
• Présentation du texte / Article studied
• Présentation du domaine / A look on
prosthodontics
• Présentation des arborescences /
Tree-diagrams
• Présentation de la traduction et problème
terminologiques / A look on the text
• Aperçu de la recherche documentaire /
Documentary research
Article studied
• Authors:
- S.J.Davies: GDP, Lecturer in Dental Practice,
University Dental Hospital of Manchester.
- R.J.M. Gray: Honorary Fellow, University Dental
Hospital of Manchester.
- M.P.J. Young: Research Associate, Clinical
Academic Group of Oral and Maxillofacial
Sciences, University Dental Hospital of
Manchester.
• Domain:
- Prosthodontics
• Publication:
- British Dental Journal, volume 198, no.2
- Date: 2 January 2002
• Public:
- Dentists
A look on prosthodontics
a) Prosthodontics is:
 a dental specialty that focuses on the restoration
and replacement of teeth.
 Prosthodontists undergo extensive training to
develop an understanding of the dynamics of a smile,
the preservation and restoration of oral health, and the
creation of tooth replacements.
b) Types of prostheses
 Dental prostheses are prosthetic restorations
commonly used in implant dentistry. One of the most
familiar types of prosthesis is dentures. Different dental
prosthesis options fall into two general groups:
removable and non-removable.
 Removable prostheses are generally:
- easy to clean and maintain;
- less expensive that non-removable
restorations;
- not as stable;
- a longer adjustment time than complete
non-removable prostheses.
 Non-removable prostheses offer patients:
- a sense of having a permanent tooth
replacement;
- difficult to clean;
- more prone to recurrent dental disease.
Common prosthodontics treatment plans may include
the use of crowns, bridges, inlays, complete and
removable partial dentures, dental implants, and work to
repair jaw joint problems, traumatic injuries, snoring or
sleep disorders, and oral cancer reconstruction.
 Dentures:
Dentures replace missing teeth and their surrounding
tissues with a removable dental appliance.
• There are two main types of dentures that are commonly
in use:
- complete dentures
- partial dentures
 Complete dentures replace all of the teeth
and their adjacent tissues.
 Partial dentures bridge the gap between
missing teeth, replacing only some of the teeth in the
patient’s mouth.
Additionally, there are two main forms of complete and
partial dentures:
- conventional dentures
- immediate dentures
These two forms deal with the procedure of installing the
dentures.
• Conventional dentures allow patients:
- a recovery time after all the teeth are extracted before
dentures are put in the mouth.
• Immediate dentures do not allow:
- a healing period before the dental prosthesis is fit into
the mouth.
Dental implants
• Implant dentistry is a specialized form of cosmetic oral
care that concentrates on the implantation of a
specialized prosthesis in order to correct varying
degrees of imperfection.
• Dental implants involve:
- directly introducing a single artificial tooth into the
gum or jawbone;
- or are used as anchors to hold crowns or bridges in
place.
• Leading reasons cited for choosing dental implants are:
- to restore normal eating and speaking abilities;
- to enhance facial appearance and confidence;
- to increase denture retention;
- made of materials that are compatible with human
bone and tissue.
c) Types of oral implants
Dental implants vary in several aspects, such as shape,
place of anchorage. There are many different types of
dental implants from which to choose, including:
1. Endosseous implants
2. Subperiosteal implants
3. Transosseous implants
• Endosseous implants:
- are implants that are surgically inserted into the
jawbone.
• Subperiosteal implants:
- are implants, which typically lie on top of the
jawbone but underneath your gum tissues. The
important distinction is that they usually do not
penetrate into the jawbone.
• Transosseous implants:
- are implants that are surgically inserted into the
jawbone.
- they penetrate the entire jaw so that they actually
emerge opposite the entry site.
• A two-phase procedure:
- the implants are surgically placed into your jawbone;
- 3 to 6 months following surgery, the implants are
gradually bonding with the jawbone;
- the oral and maxillofacial surgeon uncovers the
implants and attaches small posts which will act as
anchors for the artificial teeth;
- little chance for an allergic reaction in the body.
Présentation des arborescences
• Légende
Relation générique
Tree-diagrams
Maxillofacial
prosthesis
Prosthodontics
Prosthesis
Dental prosthesis
Complete RDP
Removable DP
Partial RDP
Dental prosthesis
conventional denture
overdenture
bridge
immediate denture
implant supported
prosthesis
fixed removable prosthesis
Cement retained FDP
Fixed DP
Screw retained FDP
Friction retained FDP
bridge
onlay
inlay
inlaycore
implant supported
prosthesis
bridge
crown
implant / tissue retained MP
Maxillofacial prosthesis
tooth retained MP
endosseous dental implant
implant retained MP
subperiosteal dental implant
transosseous dental
implant
Présentation des arborescences
Prothèse maxillo-faciale
Dentisterie
prothétique
Prothèse
Prothèse dentaire
PA complète
p.conventionnelle
p. à recouvrement
Prothèse adjointe
partielle
bridge
P.partielle
amovible
p.immédiate
p.implantaire
Prothèse dentaire
p. composite
P. collée
bridge
onlay
inlay
inlay-core
P. vissée
p.implantaire
P. scellée
bridge
Prothèse conjointe
couronne
p.maxillo-faciale retenue par des
implants ou par les tissus
p. maxillo-faciale dento-portée
Prothèse maxillo-faciale
implant endo-osseux
prothèse
implantaire
implant sous-periosté
implant trans-osseux
Présentation de la traduction
Texte source
Ma traduction
The contacts between the back teeth should be tripodal
cusp-to-fossae. Analysing and modifying such complex
contacts is generally considered very difficult in full-arch
implant supported prostheses. Chairside occlusal
equilibriation will almost always be necessary.
Guideline: Avoid non-axial loading whenever possible.
Shallow central fossae with tripodal cuspal contacts
should be attained. The presence of ridge-lapping should
be minimised whenever possible and the distal length of a
cantilever has been empirically recommended between 10
and 20 mm. More recently, it has been suggested that the
optimal distal cantilever is in the region of just 7 mm.
When exceeding this length, clinicians should carefully
consider the number, location and precise arrangement
supporting implants.
Les contacts entre les molaires doivent avoir des
rapports cuspides-fosses en tripodisme. L’analyse et
la modification de contacts aussi complexes pour les
prothèses implanto-portées de forme arquée complète est
très difficile. Une équilibration occlusale sera presque
toujours nécessaire.
Directive : Evitez la mise en charge non axiale
tant que possible. Réalisez des fosses centrées peu
profondes avec des contacts cuspides en tripodisme. La
présence d’une abrasion des crêtes doit être minimisée
tant que possible et il est recommandé, d’un point de vue
empirique, que la longueur distale du cantilever soit entre
10 et 20 mm. Plus récemment, il a été suggéré que le
cantilever distal optimal soit dans les environs de 7 mm.
Lorsque cette longueur est dépassée, les cliniciens
doivent considérer avec précaution le nombre,
l’emplacement et la disposition précise des implants
supportants.
Présentation de la traduction (suite)
Texte source
Ma traduction
b) Lingualized occlusion (LO)
Since it is acknowledged that MPO is difficult and timeconsuming to fabricate, fit and maintain, alternative
occlusal schemes have been proposed. Specifically,
'lingualized occlusion' has been recommended for the
restoration of full-arch dental implants. The aims are the
same but the major benefits of this occlusal scheme are
the comparative simplicity with which it can be established
and maintained, and its ability to direct masticatory loads
axially onto the supporting dental implants.
The key feature is the arrangement of the posterior teeth
so that only the maxillary palatal cusps (hence:
'lingualized' occlusion; or should it have been called
'palatalised' occlusion?) occlude with shallow
mandibular central fossae. There is no contact between
the mandibular buccal cusp and palatal maxillary
cusps which might result in a inclined (non-axial) contact.
b) Occlusion lingualisée
Dans la mesure où une occlusion mutuellement protégée
s’avère être difficile et longue à fabriquer, fixer et
maintenir, des traitements occlusaux alternatifs ont été
proposés. En particulier, « l’occlusion lingualisée » qui a
été recommandée pour la restauration d’implants
dentaires de forme arquée complète. Les buts sont les
mêmes mais les intérêts majeurs de ce traitement
occlusal sont la simplicité relative avec laquelle celui-ci
peut être établi et maintenu, et sa capacité à diriger les
charges masticatoires de façon axiale sur les implants
dentaires supportants.
La caractéristique clef est la disposition des dents
postérieures de telle sorte que seules les cuspides
palatines maxillaires (d’où : occlusion « lingualisée » ;
ou aurait-il fallu l’appeler occlusion « palatalisée » ?)
s’emboîtent avec des fosses centrées mandibulaires peu
profondes. Il n’y a aucun contact entre la cuspide
vestibulaire mandibulaire et les cuspides maxillaires
palatines qui pourraient résulter en un contact incliné
(non axial).
Présentation de la traduction (suite)
Problème terminologique :
 Quel référent choisir :
- loading : → mise en charge / capacité de charge / charge
 Quel sigle choisir :
- lingualized occlusion (LO) : occlusion lingualisée (OL) ?
 Le sens est-il le même ?
- « maxillary palatal cusps » et « palatal maxillary cusps »
 Problème purement terminologique :
- ridge lapping : → abrasion des crêtes

Problème syntaxique :
Le passif est majoritairement utilisé dans ce texte.
Aperçu de la recherche documentaire
• Mon tout premier besoin a été de comprendre mon texte et de ce
fait mon sujet. Donc, j’ai commencé à chercher des supports
électronique et papier.
 moteur de recherche google en recherche avancée :
- préciser qu’il s’agit d’implants dentaires, mais beaucoup
de documents qui visent à convaincre, de vulgarisation
- conséquence : « dental implant AND site : .gov OR site :
.org » = je cherche des articles scientifiques
- résultat : du bruit
- je concentre alors ma recherche sur :
▪ Science Direct, Blackwell Synergy dans lesquels
j’ai trouvé des journaux tels que British Dental Journal.
▪ PubMed (Medline)
- associations (ADA, ADF, AFIP)
Aperçu de la recherche documentaire (suite)
 recherche sur support papier :
- BIUM (bibliothèque interuniversitaire de médecine) :
une fois dans la salle Landouzy, j’ai photocopié les tables de matière
des livres relatifs aux prothèses et aux implants (Les Cahiers de
prothèses, L’information dentaire).
- Bibliothèque rue Garencière : classeur dans lequel il
y a la liste des périodiques; périodiques classés par thèmes (Journal
of esthetic dentistry, Journal of Prosthetic dentistry, Journal of
Prosthodontics, Réalités cliniques,et enfin Stratégie prothétique).
 Conclusion :
- + de documents de vulgarisation en français;
- + de documents spécialisés en anglais.