Transcript HERC HAVE QUICK - MAYPRINTING.COM

KC-130
HERC HAVEQUICK
Chief Warrant Officer Jim May III
VMGR-452 Avionics Officer
COM 845-563-2946 DSN 336-2946
Email - [email protected]
20 January 2003
HAVEQUICK
KC-130
-Anti-Jam Communication System
-Algorithm controlled Freq Hopping
-UHF only
-AM Line-of-Site (LOS)
-Jam-Resistant (Not Secure)
-Plain or Secure Voice (with KY-58)
-Developed by USAF
7/17/2015
1
ACRONYMS
KC-130
-HQ - HAVEQUICK (Active)
-TOD - Time-of-Day (Mickey)
-WOD - Word-of-Day
-MWOD - Multiple WOD (Up to 6)
-FMT - Frequency Managed Training
-NET# - Network ID Number (Jump)
-Op Day - Operational Day (Segment 7)
7/17/2015
2
EQUIPMENT
KC-130
-ARC-164 (RT-1505)
- UHF Only
- HAVEQUICK I/II form-fit
replacement for KC-130 #2
ARC-159 (requires an adapter
cable).
- Built-in control panel.
- 2 Types of Control Panels:
- Old - Manual display, NonNVIS (Face plate can be
changed out).
- New - LCD display, NVIS
compatible, Programmable
with DTD.
- Can be used with KY-58.
7/17/2015
3
EQUIPMENT
KC-130
-ARC-210 (RT-1556)
- UHF/VHF.
- HAVEQUICK I/II.
- SINCGARS.
- CDNU/RCU Control panels.
- Programmable with DTD/AFP.
- Can be used with KY-58.
- Future RT-1794(C) and RT-
R/T
1824(C) will have embedded
COMSEC (Built-in KY-58).
CDNU
7/17/2015
RCU
4
EQUIPMENT
KC-130
-DTD (CYZ-10)
- AFP Software (PC to DTD).
- CSEP (DTD Application)
- Loads Regular Presets, AJ
Presets (HQ/SINCGARS) and
WODs (KAL-9200 Crypto) into
ARC radio systems.
7/17/2015
5
TERMINOLOGY
KC-130
-TOD consists of two parts:
-Precise Zulu Time:
Hours, Minutes, Seconds,
Sub-Micro-Seconds; synchronized time allows
radios to frequency hop together.
-Op-Day:
Equal to the current calendar day (0131), selects the active WOD when the radios has
multiple WODs loaded (MWOD mode).
7/17/2015
6
TERMINOLOGY
KC-130
-TOD Types:
- Preferred:
(GPS-TOD) A precise TOD is passed from the
internal aircraft GPS system once the system has a valid
time.
- Alternate:
(Auto-TOD) A TOD passed from a such as a GPS
Time Transmitter (Auto-Dog). Usually transmitted over a
plain channel ship/station beacon every 15 seconds.
- Other:
A TOD passed from another user, only as accurate
as the other user.
- Self-Start/Emergency:
Self-Starts radio clock to
00:00:00.000000. Must then manually enter the Op-Day and
transmit this TOD to all other users or later receive a TOD
update from another source.
7/17/2015
7
TERMINOLOGY
KC-130
-WOD:
Consists of 6 segments (36 digits) that “look like” UHF
frequencies. It defines the frequency hopping dwell times and
hopping rates (Net characteristics/pattern).
300.050
376.000
First Segment
359.100
314.300
297.600
287.400
WOD Example
- Segment 1: selects Combat or Training mode (300.0XX selects Training
Mode), all others are Combat WODs.
- Last 2 digits of the 1st Segment: Selects the Hop Rate.
- Last 2 digits of the 2nd segment: Selects whether Conferencing Mode is
enabled/disabled (00/50=Enabled, 25/75=Disabled, Training Mode is always
in Conference Mode). Conference Mode: allows two net members to
transmit simultaneously and be received by the remaining net members.
7/17/2015
8
TERMINOLOGY
KC-130
-MWOD: Simply a WOD with a Date Tag. A Date Tag is a
two digit calendar day (01-31).
300.050
376.000
359.100
314.300
297.600
287.400
Date Tag
05
MWOD Example
- Up to 6 MWODs can be preloaded into a radio, this allows
seamless operation through rollover times (2400-0001Z).
- The MWOD used by the radio is the MWOD whose Date Tag
matches the Op-Day in the TOD.
- An Op-Day is the actual mission/calendar day (01-31).
7/17/2015
9
TERMINOLOGY
KC-130
-Combat HQ Crypto: (KAL-9200 “Key-Tape”)
- Segment 1: Decides the mode (Training/Combat).
- Date Tag: Seg 7-300.000 = Date (305.000-300.000= Day 05).
- All Segments: Control frequency hopping dwell times and
hopping rates.
- Combat WODs:
Only authorized for wartime use. Classified
Confidential Non-COMSEC CMS material.
SAMPLE KAL-9200 KEY-TAPE
HAVEQUICK WORD OF DAY (TRAINING ONLY)
CONF US/ALLIED SEG 03
CH14/34
CH15/35
CH16/36
CH17/37
CH18/38
CH19/39
CH20/40 KAL ED REGNO
305.000
287.400
297.600
314.300
359.100
376.000
300.050 9200 C
Seg 6
Seg 5
Seg 4
Seg 3
Seg 2
Date Tag
7/17/2015
Seg 1
225
Key Info
Key Data
10
TERMINOLOGY
KC-130
-FMT: Frequency Managed Training Table, the actual
frequencies (Hop Set) that make up the Training Net (T-Net).
- HQ I Training mode: Contains 5 FMT Table (Last 5 Seg of WOD).
- HQ II Training mode: Contains 16 FMT Table (Below).
- HQ II Combat Mode: Contains nearly unlimited combinations of
Hop Sets, only authorized for actual wartime.
- CONUS approved FMT Table: normally already defaulted in the
radio:
HQII (16 FMT - CONUS)
HQI (5 FMT)
F1 – XXX.XXX
F2 – XXX.XXX
F3 – XXX.XXX
F4 – XXX.XXX
F5 – XXX.XXX
7/17/2015
F1 – 235.050
F2 – 225.150
F3 – 252.925
F4 – 239.950
F5 – 271.950
F6 – 267-850
F7 – 262.450
F8 – 257.250
F9 – 314.450
F10 – 308.750
F11 – 303.275
F12 – 298.650
F13 – 293.550
F14 – 289.050
F15 – 284.150
F16 – 279.750
11
TERMINOLOGY
KC-130
-NET:
A group of frequencies that is used for
synchronized frequency hopping during HAVEQUICK
operations.
7/17/2015
- Combat Mode:
1000 possible Nets (000-999)
- Training Mode:
5 possible Nets in HQI (000-004)
16 possible Nets in HQII (000-015)
12
TERMINOLOGY
KC-130
-NET#: Determines the order in which the radio will hop
among the frequencies, has the following form:
AXX.XYY
- In Combat Mode: XX.X = 00.0 - 99.9 (1000 Nets), frequency tables used are:
- AXX.X00 HQ I
- AXX.X25 HQ II NATO (Europe)
- AXX.X50 HQ II Non-NATO (Non-Europe/War Reserve)
- AXX.X75 Reserved for HQ IIa (Saturn)
- In Training Mode (T-Net):
- AXX.X00 HQ I, XX.X = 00.0 - 00.4 (5 T-Nets), 5 FMT specified by
the training WOD.
- AXX.X25 HQ II, XX.X = 00.0 - 01.5 (16 T-Nets), 16 FMT Table
used.
7/17/2015
13
TERMINOLOGY
KC-130
-NET# Formats: (Example is NATO Net 452)
A45.225
•AFP, KC-130
AXX.XYY (A45.225)
- A: Operational
- XX.X: Net# (23.9 = Net 452)
- YY: NATO (Europe)
XXX.0YY (452.025)
452.025
- XXX: Net# (239 = Net 452)
- 0: Not Used
- YY: NATO (Europe)
•F/A-18
3XX.XYY (345.225)
345.225
- 3: Operational/Active
- XX.X: Net# (23.9 = Net 452)
- YY: NATO (Europe)
•EA-6, F-14, S-3
7/17/2015
14
HQ BASICS
TOD
KC-130
Continuously Changing Variable
TIME OP-DAY
20:30
FREQ TABLES
07
FREQ TABLES
FREQ TABLES
Op-Day Selects MWOD
MWOD
MWOD
MWOD
MWOD
MWOD
MWOD
212.025
312.025
378.050
212.025
342.025
242.025
322.050
245.025
354.050
322.050
322.050
322.050
262.000
322.000
232.050
262.000
262.000
372.050
312.025
232.025
312.025
312.025
312.025
312.025
342.025
282.025
342.025
342.025
292.025
342.025
212.000
392.000
298.000
212.025
262.000
362.050
04
05
06
07
08
09
Date Tag
NET#
A01.225
MWOD’s allow the radio to automatically switch to the next WOD
when rollover occurs at 2400Z, this eliminates “Mid-Night Madness”
and allows seamless operation throughout a mission.
7/17/2015
20:23
345.250
234.252
20:24
321.215
328.235
20:25
374.250
200.845
20:26
301.250
336.125
20:27
374.250
200.845
20:28
321.215
328.235
20:29
324.250
210.845
20:30
301.250
336.125
20:31
321.215
328.235
20:32
374.250
200.845
20:33
301.250
336.125
20:34
374.250
200.845
20:35
301.250
336.125
20:36
374.250
Transmits/Receives
on Freq 301.250
for specified time
15
COMM REQUIREMENTS
-RADIO 1
-RADIO 2
- TOD
- WOD
- FMT Table
- NET#
- TOD
- WOD
- FMT Table
- NET#
COMMUNICATION
KC-130
-TOD, WOD, Net# and FMT Table (Hop Set) MUST ALL be
identical for communication to take place between radios.
7/17/2015
16
ARC-164 SETUP
KC-130
-Command Codes:
- Six-digit programming
codes that allow the user
to program and setup the
ARC-164 radio system.
- Activated by entering the
specific code in Preset
Channel 20.
COMMAND
MODE
FUNCTION
220.000
Verify/Operate
220.025
MWOD Load
220.050
MWOD Erase
220.075
FMT-Net Load
- When activated, they act
as additional switches.
7/17/2015
17
ARC-164 SETUP
-Initialize (Verify/Operate):
- Set Function Selector to MAIN or
KC-130
CHAN
01
PRESET
EMB
BOTH.
A
2
3
5
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
ADF
OFF
TONE
7/17/2015
PRESET
MANUAL
GUARD
BOTH
ON
SQUELCH
18
ARC-164 SETUP
-Initialize (Verify/Operate):
KC-130
CHAN
- Set Function Selector to MAIN or
PRESET
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
3
A
2
01
3
5
EMB
.0
50
2
T
MAIN
U
H
F
OFF
VOL
ADF
OFF
TONE
7/17/2015
PRESET
MANUAL
GUARD
BOTH
ON
SQUELCH
19
ARC-164 SETUP
-Initialize (Verify/Operate):
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
CHAN
20
PRESET
A
2
3
5
EMB
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
20
ARC-164 SETUP
-Initialize (Verify/Operate):
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.000 (Verify/Operate).
CHAN
20
PRESET
A
2
2
0
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
21
ARC-164 SETUP
-Initialize (Verify/Operate):
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.000 (Verify/Operate).
- Lift access cover and press Red
PRESET button (single beep).
CHAN
20
PRESET
A
2
2
0
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
22
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
KC-130
CHAN
01
PRESET
EMB
BOTH.
A
2
3
5
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
ADF
OFF
TONE
7/17/2015
PRESET
MANUAL
GUARD
BOTH
ON
SQUELCH
23
ARC-164 SETUP
-Load WOD/MWOD:
KC-130
CHAN
- Set Function Selector to MAIN or
PRESET
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
3
A
2
01
3
5
EMB
.0
50
2
T
MAIN
U
H
F
OFF
VOL
ADF
OFF
TONE
7/17/2015
PRESET
MANUAL
GUARD
BOTH
ON
SQUELCH
24
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
CHAN
20
PRESET
A
2
3
5
EMB
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
25
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
CHAN
20
PRESET
A
2
2
0
EMB
.0
3
25
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
26
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
CHAN
20
PRESET
A
2
2
0
EMB
.0
3
25
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
27
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
7/17/2015
KC-130
CHAN
20
PRESET
A
2
2
0
EMB
.0
3
25
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
28
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to 1st
Segment (300.050).
7/17/2015
KC-130
CHAN
20
PRESET
A
3
0
0
EMB
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
29
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to 1st
Segment (300.050).
- Press TONE button (single beep).
7/17/2015
KC-130
CHAN
20
PRESET
A
3
0
0
EMB
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
30
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to 1st
Segment (300.050).
- Press TONE button (single beep).
- Set CHAN to 19.
7/17/2015
KC-130
CHAN
19
PRESET
A
3
0
0
EMB
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
31
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to 1st
Segment (300.050).
- Press TONE button (single beep).
- Set CHAN to 19.
- Set Frequency switches to 2nd
Segment (376.000).
7/17/2015
KC-130
CHAN
19
PRESET
A
3
7
6
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
32
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to 1st
Segment (300.050).
- Press TONE button (single beep).
- Set CHAN to 19.
- Set Frequency switches to 2nd
Segment (376.000).
7/17/2015
KC-130
CHAN
19
PRESET
A
3
7
6
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Press TONE button (single beep).
33
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to 1st
Segment (300.050).
- Press TONE button (single beep).
- Set CHAN to 19.
- Set Frequency switches to 2nd
Segment (376.000).
7/17/2015
KC-130
CHAN
18
PRESET
A
3
7
6
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Press TONE button (single beep).
- Set CHAN to 18.
34
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to 1st
Segment (300.050).
- Press TONE button (single beep).
- Set CHAN to 19.
- Set Frequency switches to 2nd
Segment (376.000).
7/17/2015
KC-130
CHAN
18
PRESET
A
3
5
9
EMB
.1
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Press TONE button (single beep).
- Set CHAN to 18.
- Set Frequency switches to 3rd
Segment (359.100).
35
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to 1st
Segment (300.050).
- Press TONE button (single beep).
- Set CHAN to 19.
- Set Frequency switches to 2nd
Segment (376.000).
7/17/2015
KC-130
CHAN
18
PRESET
A
3
5
9
EMB
.1
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Press TONE button (single beep).
- Set CHAN to 18.
- Set Frequency switches to 3rd
Segment (359.100).
- Press TONE button (single beep).
36
ARC-164 SETUP
-Load WOD/MWOD:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.025 (MWOD Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to 1st
Segment (300.050).
- Press TONE button (single beep).
- Set CHAN to 19.
- Set Frequency switches to 2nd
Segment (376.000).
7/17/2015
KC-130
CHAN
17
PRESET
A
3
5
9
EMB
.1
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Press TONE button (single beep).
- Set CHAN to 18.
- Set Frequency switches to 3rd
Segment (359.100).
- Press TONE button (single beep).
- Set CHAN to 17.
37
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
KC-130
CHAN
17
PRESET
EMB
Segment (314.300).
A
3
1
4
.3
3
00
2
T
MAIN
U
H
F
OFF
VOL
ADF
OFF
TONE
7/17/2015
PRESET
MANUAL
GUARD
BOTH
ON
SQUELCH
38
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
KC-130
CHAN
17
PRESET
Segment (314.300).
- Press TONE button (single beep).
A
3
1
4
EMB
.3
3
00
2
T
MAIN
U
H
F
OFF
VOL
ADF
OFF
TONE
7/17/2015
PRESET
MANUAL
GUARD
BOTH
ON
SQUELCH
39
ARC-164 SETUP
-Load WOD/MWOD (Cont):
KC-130
CHAN
- Set Frequency switches to 4th
PRESET
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
3
A
3
16
1
4
EMB
.3
00
2
T
MAIN
U
H
F
OFF
VOL
ADF
OFF
TONE
7/17/2015
PRESET
MANUAL
GUARD
BOTH
ON
SQUELCH
40
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
CHAN
16
PRESET
A
2
9
7
EMB
.6
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
41
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
- Press TONE button (single beep).
CHAN
16
PRESET
A
2
9
7
EMB
.6
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
42
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
- Press TONE button (single beep).
- Set CHAN to 15.
CHAN
15
PRESET
A
2
9
7
EMB
.6
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
43
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
- Press TONE button (single beep).
- Set CHAN to 15.
- Set Frequency switches to 5th
Segment (287.400).
7/17/2015
KC-130
CHAN
15
PRESET
A
2
8
7
EMB
.4
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
44
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
- Press TONE button (single beep).
- Set CHAN to 15.
- Set Frequency switches to 5th
Segment (287.400).
- Press TONE button (single beep).
7/17/2015
KC-130
CHAN
15
PRESET
A
2
8
7
EMB
.4
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
45
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
- Press TONE button (single beep).
- Set CHAN to 15.
- Set Frequency switches to 5th
Segment (287.400).
- Press TONE button (single beep).
- Set CHAN to 14.
7/17/2015
KC-130
CHAN
14
PRESET
A
2
8
7
EMB
.4
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
46
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
- Press TONE button (single beep).
- Set CHAN to 15.
- Set Frequency switches to 5th
Segment (287.400).
- Press TONE button (single beep).
- Set CHAN to 14.
- Set Frequency switches to DATE
TAG in format 3XX.000 (January 5
= 305.000).
7/17/2015
KC-130
CHAN
14
PRESET
A
3
0
5
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
47
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
7/17/2015
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
- Press TONE button (single beep).
- Set CHAN to 15.
- Set Frequency switches to 5th
Segment (287.400).
- Press TONE button (single beep).
- Set CHAN to 14.
- Set Frequency switches to DATE
TAG in format 3XX.000 (January 5
= 305.000).
- Press TONE button (double
beep).
KC-130
CHAN
14
PRESET
A
3
0
5
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
48
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
7/17/2015
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
- Press TONE button (single beep).
- Set CHAN to 15.
- Set Frequency switches to 5th
Segment (287.400).
- Press TONE button (single beep).
- Set CHAN to 14.
- Set Frequency switches to DATE
TAG in format 3XX.000 (January 5
= 305.000).
- Press TONE button (double
beep).
KC-130
CHAN
14
PRESET
A
3
0
5
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- To Load additional MWODs,
return to Channel 20 and repeat
loading procedure.
49
ARC-164 SETUP
-Load WOD/MWOD (Cont):
- Set Frequency switches to 4th
7/17/2015
Segment (314.300).
- Press TONE button (single beep).
- Set CHAN to 16.
- Set Frequency switches to 4th
Segment (297.600).
- Press TONE button (single beep).
- Set CHAN to 15.
- Set Frequency switches to 5th
Segment (287.400).
- Press TONE button (single beep).
- Set CHAN to 14.
- Set Frequency switches to DATE
TAG in format 3XX.000 (January 5
= 305.000).
- Press TONE button (double
beep).
KC-130
CHAN
14
PRESET
A
3
0
5
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- To Load additional MWODs,
return to Channel 20 and repeat
loading procedure.
- Radio will retain the 6 most
recent WODs loaded in nonvolatile memory and are retained
when the radio is turned off.
50
ARC-164 SETUP
KC-130
-Verify WOD Storage:
- Ensure you are in Verify/Operate
CHAN
20
PRESET
3
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
5
A
2
2
4
0
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
1
TONE
7/17/2015
EMB
ON
2
SQUELCH
51
ARC-164 SETUP
-Verify WOD Storage:
- Ensure you are in Verify/Operate
KC-130
CHAN
20
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
A
2
.0
00
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
0
2
- Set Manual-Preset-Guard
Selector to MANUAL.
2
3
ON
SQUELCH
52
ARC-164 SETUP
-Verify WOD Storage:
- Ensure you are in Verify/Operate
KC-130
CHAN
20
19
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
A
3
7/17/2015
5
.0
00
2
T
- Set Manual-Preset-Guard
Selector to MANUAL.
- Set Frequency switches to DATE
TAG in format 3XX.000 (January 5
= 305.000), set CHAN switch
Momentarily to 19 and return to
20, a single beep indicates WOD
for that day is loaded (No beep,
No WOD stored), repeat this step
for each day to be verified.
0
3
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
53
ARC-164 SETUP
KC-130
-TOD Info:
- Ensure you are in Operate Mode when performing TOD functions.
- The ARC-164 will automatically accept the first valid TOD signal it
receives and reject subsequent TODs unless an update action is
initiated.
- A TOD update may be necessary when incoming transmissions
from several different radios sound garbled.
- It is possible to receive a TOD in both normal and active modes.
- The purpose of passing a TOD in active mode is to easily allow a
minor update due to radio drifting out of synchronization.
- If your TOD has drifted too much, a TOD update in active mode
may not be possible.
7/17/2015
54
ARC-164 SETUP
KC-130
-TOD Receive:
- Ensure you are in Verify/Operate
CHAN
20
PRESET
3
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
5
A
2
2
4
0
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
1
TONE
7/17/2015
EMB
ON
2
SQUELCH
55
ARC-164 SETUP
-TOD Receive:
- Ensure you are in Verify/Operate
KC-130
CHAN
20
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
A
3
7/17/2015
8
.0
00
2
T
- Set Frequency switches to TOD
broadcast frequency (Auto-Dog
frequency or another users
frequency).
5
3
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
56
ARC-164 SETUP
-TOD Receive:
- Ensure you are in Verify/Operate
KC-130
CHAN
20
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
A
T
7/17/2015
8
.0
00
2
T
- Set Frequency switches to TOD
broadcast frequency (Auto-Dog
frequency or another users
frequency).
- Turn the A-3-2-T knob to “T”
momentarily and return to prior
selection (You have now opened
a 60 window to receive a TOD, if
no TOD is received the window
closes and “T” will need to be
reselected).
5
3
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
57
ARC-164 SETUP
-TOD Receive:
- Ensure you are in Verify/Operate
KC-130
CHAN
20
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
A
3
7/17/2015
8
.0
00
2
T
- Set Frequency switches to TOD
broadcast frequency (Auto-Dog
frequency or another users
frequency).
- Turn the A-3-2-T knob to “T”
momentarily and return to prior
selection (You have now opened
a 60 window to receive a TOD, if
no TOD is received the window
closes and “T” will need to be
reselected).
5
3
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- On set frequency, wait for AutoDog (10-15 seconds) or request a
“Mickey” from other user, a short
beep will indicate a TOD was
received.
58
ARC-164 SETUP
KC-130
-TOD Check (Confirm):
- To confirm that a TOD has been received:
- Re-tune the radio to another frequency (to preclude transmitting
a non-common TOD to another user).
- Press and hold TONE button.
- Listen for TOD and Tone signal
- If you hear a only a standard tone, the radio has not received a
TOD.
- If you hear a TOD signal followed by a standard tone, the radio
has received a TOD.
- The TOD check will assume that some time is loaded, but
the only way to determine if it is the correct time is to go
active and try a talk test.
7/17/2015
59
ARC-164 SETUP
-TOD Send:
- Establish radio contact/receive
request.
- Press the TONE button to
transmit TOD with in 60 seconds
of receiver’s request.
KC-130
CHAN
20
PRESET
A
3
5
8
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
ADF
OFF
TONE
7/17/2015
PRESET
MANUAL
GUARD
BOTH
ON
SQUELCH
60
ARC-164 SETUP
KC-130
-TOD (Self-Start/Emergency):
- NOT RECOMMENDED, Only use as a last resort.
- Will not be able to transmit/receive in Active Mode to users
on a “Real-Time” synchronized system until TOD is
updated from a “Real-Time” source (Auto-Dog/User with
true GPS/Zulu Time).
- Self-Starts require the Op-Day to be entered, since a SelfStart only restarts the radios clock to 00:00:00.000000 (no
Date Tag).
- Op-Day is not required to be entered with a normal TOD,
since the Date Tag is included in a TOD.
7/17/2015
61
ARC-164 SETUP
KC-130
-TOD (Self-Start/Emergency):
- Ensure you are in Verify/Operate
CHAN
20
PRESET
3
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
5
A
2
2
4
0
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
1
TONE
7/17/2015
EMB
ON
2
SQUELCH
62
ARC-164 SETUP
-TOD (Self-Start/Emergency):
- Ensure you are in Verify/Operate
KC-130
CHAN
20
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
A
T
.0
00
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
0
2
- Turn the A-3-2-T knob to “T” and
hold.
2
3
ON
SQUELCH
63
ARC-164 SETUP
-TOD (Self-Start/Emergency):
- Ensure you are in Verify/Operate
KC-130
CHAN
20
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
A
T
7/17/2015
0
.0
00
2
T
- Turn the A-3-2-T knob to “T” and
hold.
- Press TONE button while holding
A-3-2-T at “T” position (no tone
signal will be heard), release
knob and button.
2
3
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
64
ARC-164 SETUP
-TOD (Self-Start/Emergency):
- Ensure you are in Verify/Operate
KC-130
CHAN
20
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
A
2
7/17/2015
0
.0
00
2
T
- Turn the A-3-2-T knob to “T” and
hold.
- Press TONE button while holding
A-3-2-T at “T” position (no tone
signal will be heard), release
knob and button.
- To confirm radio has TOD, press
and hold TONE button (listen for
TOD signal followed by a short
tone).
2
3
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
65
ARC-164 SETUP
- Select Current Op-Day:
- After all WODs and their Date
KC-130
CHAN
14
PRESET
EMB
Tags have been entered, the
current Op-Day must be loaded.
A
3
0
5
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Entering Op-Day is only
required for Self-Starts.
- Only use this function to
manually select an MWOD.
7/17/2015
66
ARC-164 SETUP
- Select Current Op-Day:
- After all WODs and their Date
Tags have been entered, the
current Op-Day must be loaded.
- This date is loaded into volatile
memory and will be lost when the
radio is turned off.
KC-130
CHAN
14
PRESET
A
3
0
5
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Entering Op-Day is only
required for Self-Starts.
- Only use this function to
manually select an MWOD.
7/17/2015
67
ARC-164 SETUP
- Select Current Op-Day:
- After all WODs and their Date
Tags have been entered, the
current Op-Day must be loaded.
- This date is loaded into volatile
memory and will be lost when the
radio is turned off.
- While in still in MWOD Load
Mode, Set CHAN to 01.
KC-130
CHAN
01
PRESET
A
3
0
5
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Entering Op-Day is only
required for Self-Starts.
- Only use this function to
manually select an MWOD.
7/17/2015
68
ARC-164 SETUP
- Select Current Op-Day:
- After all WODs and their Date
Tags have been entered, the
current Op-Day must be loaded.
- This date is loaded into volatile
memory and will be lost when the
radio is turned off.
- While in still in MWOD Load
Mode, Set CHAN to 01.
- Set Frequency switches to DATE
TAG in format 3XX.000 (January 5
= 305.000).
KC-130
CHAN
01
PRESET
A
3
0
5
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Entering Op-Day is only
required for Self-Starts.
- Only use this function to
manually select an MWOD.
7/17/2015
69
ARC-164 SETUP
- Select Current Op-Day:
- After all WODs and their Date
Tags have been entered, the
current Op-Day must be loaded.
- This date is loaded into volatile
memory and will be lost when the
radio is turned off.
- While in still in MWOD Load
Mode, Set CHAN to 01.
- Set Frequency switches to DATE
TAG in format 3XX.000 (January 5
= 305.000).
- Press TONE button (single beep).
KC-130
CHAN
01
PRESET
A
3
0
5
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Entering Op-Day is only
required for Self-Starts.
- Only use this function to
manually select an MWOD.
7/17/2015
70
ARC-164 SETUP
- Select Current Op-Day:
- After all WODs and their Date
Tags have been entered, the
current Op-Day must be loaded.
- This date is loaded into volatile
memory and will be lost when the
radio is turned off.
- While in still in MWOD Load
Mode, Set CHAN to 01.
- Set Frequency switches to DATE
TAG in format 3XX.000 (January 5
= 305.000).
- Press TONE button (single beep).
- After completing MWOD’s and/or
Op-Day Loading, ensure you
place the radio back into Operate
Mode using the prior listed
Initialization procedure
(Verify/Operate 220.000).
7/17/2015
KC-130
CHAN
01
PRESET
A
3
0
5
EMB
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
- Entering Op-Day is only
required for Self-Starts.
- Only use this function to
manually select an MWOD.
71
ARC-164 SETUP
KC-130
-Active Mode Info:
- WOD and TOD may be entered in any order once the radio
is turned on.
- When entering Active mode, a STEADY Tone is heard in the
headset if TOD has not been initially received, Op-Day not
entered for Self-Start/Emergency Mode or a WOD has not
been entered.
- When entering Active mode, an INTERRUPTED tone is
heard in the headset when an incorrect Net# is selected.
- You can select/store a Net# the same as a regular Preset
and Manual frequency.
7/17/2015
72
ARC-164 SETUP
KC-130
-Selecting Net#:
- Ensure you are in Verify/Operate
CHAN
20
PRESET
3
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
WOD/MWOD Entered.
TOD Received (Set Op-Day if SelfStart/Emergency).
5
A
2
2
4
0
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
1
TONE
7/17/2015
EMB
ON
2
SQUELCH
73
ARC-164 SETUP
-Selecting Net#:
- Ensure you are in Verify/Operate
KC-130
CHAN
20
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
WOD/MWOD Entered.
TOD Received (Set Op-Day if SelfStart/Emergency).
- Set Manual-Preset-Guard
Selector to MANUAL.
7/17/2015
A
2
2
0
.0
3
00
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
74
ARC-164 SETUP
-Selecting Net#:
- Ensure you are in Verify/Operate
KC-130
CHAN
20
PRESET
EMB
Mode:
-
Set Function Selector to MAIN or BOTH.
Set Manual-Preset-Guard Selector to PRESET.
Set CHAN to 20.
Set Frequency switches to 220.000
(Verify/Operate).
Press Red PRESET button (single beep).
WOD/MWOD Entered.
TOD Received (Set Op-Day if SelfStart/Emergency).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Turn the A-3-2-T knob to “A”, set
frequency switches to required
Net# and transmit as usual.
A
A
0
1
.4
3
25
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
Example shown is NATO Net# 014
7/17/2015
75
ARC-164 SETUP
KC-130
-Erase MWODs from Memory:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
CHAN
20
PRESET
3
A
2
3
5
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
1
TONE
7/17/2015
EMB
ON
2
SQUELCH
76
ARC-164 SETUP
-Erase MWODs from Memory:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.050 (MWOD Erase).
CHAN
20
PRESET
A
2
2
0
EMB
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
7/17/2015
KC-130
ON
SQUELCH
77
ARC-164 SETUP
-Erase MWODs from Memory:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.050 (MWOD Erase).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Press TONE button (single beep).
7/17/2015
KC-130
CHAN
20
PRESET
EMB
1
A
2
0
2
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
3
OFF
TONE
ON
2
SQUELCH
78
ARC-164 SETUP
-Erase MWODs from Memory:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.050 (MWOD Erase).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Press TONE button (single beep).
- All MWODs are erased, Active
Mode is disabled until MWODs
are reloaded, return to
Verify/Operate mode to operate
radio in regular mode.
7/17/2015
KC-130
CHAN
20
PRESET
A
2
2
0
EMB
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
SQUELCH
79
ARC-164 SETUP
KC-130
-Load FMT-Net Frequencies:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
CHAN
20
PRESET
3
A
2
3
5
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
1
TONE
7/17/2015
EMB
ON
2
SQUELCH
80
ARC-164 SETUP
-Load FMT-Net Frequencies:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.075 (FMT-Net Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
7/17/2015
KC-130
CHAN
20
PRESET
EMB
2
A
2
2
1
0
.0
3
75
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
ON
3
SQUELCH
81
ARC-164 SETUP
KC-130
-Load FMT-Net Frequencies:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.075 (FMT-Net Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Ensure CHAN is still set to 20.
- Set Frequency switches to 1st
FMT training frequency (235.050).
- Press TONE button (single beep).
7/17/2015
CHAN
20
PRESET
EMB
1
A
2
5
3
2
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
3
OFF
TONE
ON
SQUELCH
82
ARC-164 SETUP
KC-130
-Load FMT-Net Frequencies:
- Set Function Selector to MAIN or
BOTH.
- Set Manual-Preset-Guard
Selector to PRESET.
- Set CHAN to 20.
- Set Frequency switches to
220.075 (FMT-Net Load).
- Press Red PRESET button (single
beep).
- Set Manual-Preset-Guard
Selector to MANUAL.
- Ensure CHAN is still set to 20.
- Set Frequency switches to 1st
FMT training frequency (235.050).
- Press TONE button (single beep).
7/17/2015
CHAN
19
PRESET
EMB
1
A
2
5
2
2
.1
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
3
OFF
TONE
ON
SQUELCH
- Continue decreasing CHAN by 1,
entering frequencies and
pressing TONE button until all 16
are loaded (like MWOD entry).
- Return to Verify/Operate Mode.
83
HERC HAVEQUICK
KC-130
QUESTIONS?
7/17/2015
84
BACKUPS
KC-130
CHAN
01
PRESET
2
A
EMB
5
3
.0
3
50
2
T
MAIN
U
H
F
OFF
VOL
PRESET
MANUAL
GUARD
BOTH
ADF
OFF
TONE
VOL
ON
SQUELCH
CHAN FREQ/NET/TIME
88
CHAN/FREQ
888:888
SHQIIa
FAULT
V/U
TIME
AM
H
SND
LE
H
GPS
FM
L
RCV
OFFST
TR+G
F TEST
OFF
TR
PUSH
LOAD
PRST
MAR
ADF
AJ
ZRO
CHNG
AJ/M
(PULL)
PRST
(PULL)
7/17/2015
CRSR
OFST
MAN
243
121
(PULL)
85