TyreCheck

2011 1

TYRECHECK KIT & CONTENTS

2

TURN ON POWER HERE

KIT CONTENTS:

Wireless Pressure Stick Flexi Gauge 2 Chucks & Calibration Block 3

Connecting PDA & Flexi Gauge via Bluetooth Turn on the Flexi Gauge by holding down the middle button until “ Measurement ” appears onscreen. On the HTC, tap the red “ Bluetooth ” icon to begin connecting the devices.

Bluetooth icon appears blue when connected and red when disconnected.

Turn on HTC.

Go to “ Start ” and choose program “ TyreCheck.Mobile

” .

Enter password and tap the unlock icon.

4

Connecting PDA & Flexi Gauge via Bluetooth First screen displays available devices. Choose the device to connect to the HTC and select the left/right arrow icon.

The screen will read “ Connecting ” . This changes to “ Connected ” . Once connected you will see the Bluetooth icon and an image of the device. Use the Exit icon to return to the previous screen.

Flexi Gauge Image Exit Icon Bluetooth Icon

5

Completing Inspections Tap the single bus icon from the Main Menu Screen. This will bring up the Fleet Screen. Choose your fleet from the drop down menu.

This icon brings up your keyboard.

6

Completing Inspections Once fleet is selected, tap on the green spy glass icon, this will bring up a list of vehicles. If the vehicle you are searching for is not listed, you can manually enter the vehicle # by tapping the yellow box. The keyboard will appear so you can enter needed vehicle #. Tap green spy glass icon to locate vehicle with in your fleet. If vehicle is listed, tap vehicle # and then tap the single bus icon to bring up the vehicle footprint for inspections.

Tap the middle button on the Flexi Gauge. The Tyrecheck program starts with the left front tire of the vehicle. Take your pressure and tread depth readings. Press the middle button on the Flexi after each tire to move to the next tire, or select the next tire using the HTC. Click the Flexi ’ s middle button twice when the inspection is complete to return to the Vehicle Registration screen.

Repeat the process for each vehicle.

7

TyreCheck Flexi Gauge

Mini USB Connection for charging Large display which lights up when measurement is taken Hold down center button to turn on and off Double Click to toggle between measurement mode and setup mode Stable footing to enable accurate tread readings Spring loaded Tread reading needle, to allow for repeatable readings When in Setup Mode use the Navigation Keys to move around the menus 8

COMPLETING INSPECTIONS & PRESSURE CORRECTIONS USING THE PORTABLE AUTOMATIC TIRE INFLATOR 1.TURN ON INFLATOR HERE 2.CLICK ON BLUETOOTH ICON 3.TAP GREEN ARROW-DEVICE TWO TO CONNECT CONNECTING THE INFLATOR VIA BLUETOOTH 4. INFLATOR ICON WILL BE VISIBLE WHEN CONNECTED 9

COMPLETING INSPECTIONS & PRESSURE CORRECTIONS USING THE PORTABLE AUTOMATIC TIRE INFLATOR FOLLOWING TREAD DEPTH INSPECTIONS OF EACH TIRE ATTACH THE AUTOMATIC TIRE INFLATOR HOSE TO RECORD & CORRECT PRESSURE 10

Synchronizing with the HTC

Tap on “TyreCheck.Mobile”.

Enter password and tap the unlock icon.

Tap blue world icon to start synchronizing

14

SYNCHRONIZATION IN PROGRESS PDA AUTOMATICALLY SYNCS

WHEN SYNCHRONIZATION IS FINISHED- WILL READ “SYCHRONIZATION COMPLETE” TAP RED EXIT DOOR TO FINISH 12

TO CLOSE TYRECHECK TAP THE RED ICON THIS WILL RETURN YOU TO THE START UP SCREEN 13

Haltec Corp. Contacts

: Toll Free-800.321.6471

Ken Coyne-Office: 330.222.150 Ext.219 Cell:330.310.3510

Kyle Captain-Cell: 304.208.7782

Mike Caron-Office: 330.222.1501 Ext.254 Cell: 330.651.6899

Ryan Stuver-Office: 330.222.1501 Ext. 257 Cell: 330.277.6426

Alex Austin-Office:330.222.1501 Ext. 255 14