Transcript a preview of new STI EQUIPMENT

Schaefer Technologies, Inc.
For all your Capsule Filling, Banding,
Tableting, Blister Packing, and
Isolation Equipment Requirements
STI Model-10 ver 4.2 Capsule Filler
with CP-4200 Capsule Polisher






The Model-10 with the HMI
Touch Screen Controller is
the Work Horse of the
capsule filling industry.
A semi automatic 2 piece
capsule filler
Capsule sizes 000, 00, 0, 1,
2, 3, 4 and DB capsules.
Ideal for over-encapsulation
18,000 to 25,000 capsule
per hour.
CP-4200 Capsule polisher is
the perfect in-line
companion to the Model-10
Capsule Filler.
IN-CAP® Dott.Bonapace
Automatic Bench Top Capsule Filling
Machine




The IN-CAP the first fully
automatic bench top
capsule filling machine.
Very popular all over the
world among Research
and Development
laboratories, for clinical
trial research and batch
production.
IN-CAP dosing capabilities
are: powder, liquid,
pellets, mini-tablets, and
over-encapsulation.
Output ~3,000 capsule
per hour.
CPR-6® Dott.Bonapace
Single Station Tablet Press





Single punch automatic
tablet press.
The CPR-6 is one of the
smallest bench top tablet
press existing.
Compression force of 2.5
tons.
Output of ~2,500 tablet
per hour.
Maximum tablet diameter
is 16 mm.
STI LF-10 ver 1.1 Liquid Capsule
Filling Unit




LF-10 two piece hard
gelatin or vegetable based
capsules.
Will fill products with
viscosities of 100 to 1,000
cps
8 liter heated hopper with
stirrer.
Production capacity
ranging from 10,000 to
25,000 capsules per hour,
depending on capsule size
and formulation.
STI CB-15 Automatic Capsule Banding
Machine



The CB-15 is designed to
band the joint portions of
the cap and body of filled
capsules.
Maximum 15,000 capsules
per hour.
Capsule sizes 000-4.
STI Laboratory Model Capsule Bander


The STI Laboratory Model
Capsule Bander is
designed to band the joint
between the capsule cap
and body in order to
prevent leakage of liquid
products, reduce oxidation
of the contents in the
capsule
Since the machine
simulates the production
machines, it is possible to
make low volume runs for
clinical trails, comparative
studies, stability studies,
etc.
MINICAP-100® Dott.Bonapace
Capsule Processing Machine




MINICAP-100 orientating
and Filling set-up
Ideal for research
laboratories, pharmacies
and quality control
departments where small
production batches are
required.
It uses a 100 hole tray.
Hourly output: ~2,500
capsules per hour.
IN-PACK® Dott.Bonapace
Semi-Automatic Blistering Machine


The IN-PACK is the
blistering machine, ideal
for clinical trials, stability
testing, pack development
and low volume
production for
laboratories.
The machine does
thermoforming, sealing,
coding and cutting blisters
in PVC/ALU and ALU/ALU.
SIMPATY® Dott.Bonapace
De-Blistering Machine



The Simpaty is a blister
opening machine.
This machine is used to
recover product from a
blister card.
The machine helps
operators save time, by
not having to recover
product by hand.
STI Wet-in-Place Isolated
IN-CAP® Dott.Bonapace
Capsule Filling System

Designed for Small Volume Capsule
Filling Projects (Powder, Pellets, Bead
& Liquid)

Perfect for R&D and Clinical Trials

The System utilizes re-circulated air
and is HEPA filtered to achieve ISO
class 5 levels when measured in static
conditions

Negative or Positive Pressure

Breach System

Wet In Place (WIP) Spray Wand for
Wetting

Capsule discharge to Continuous
Bagging System

Can Be Customized To Your
Requirements
To schedule a visit or for additional
information - call 800-435-7174.
www.schaefer-technologies.net
www.schaefer-technologies.com
[email protected]