Transcript Document

Light OP 504 ex – Project Presentation
Luca Invernizzi Design
1
Diameter Max = 71 mm
OP 504 ex - 2D Side View
Length = 250 mm
Actual Size
2
Various Views
FRONT VIEW
REAR VIEW
TOP VIEW
SIDE VIEW
3
Internal Light Features
NEW inside:
Aluminum Housing,
with Heat Sink.
INTERCHANGEABLE
BATTERY MODULE
Simply unscrew the
Recharge Bushings
Recharge Bushing
4
Rear Part Command & Functions
Security Slide:
Switch ON – OFF all light functions
Ultra Bright White LED:
High Efficiency White LED – 10k mcd
Pulse Power Set Magnetic Button:
1 Push = 100% Power – 2 Push = 50% - 3 Push = UB LED
3 sec holding = SOS signal
Pulse OFF Magnetic Button:
Security Slide
Switch OFF all activate function
Multicolor Information LED:
- Battery capacity indicator (average)
- Charging Status
- Alarm Indication
Multicolor Information LED
Pulse OFF
Magnetic Button
Ultra Bright White LED
Pulse Power Set
Magnetic Button
5
Features
Tomorrow's lights today.
OceanPro lights have found their way into thousands of dive bags over the past two decades, and still have a reputation as one of the
brightest, toughest, and most dependable lights around.
The new OceanPro 504 EX is an upgrade from the famous OceanPro 502 EX.
Advantages of the OceanPro 504 EX over the OP 502 EX.
- New design (see the picture).
- Two easy magnetic push button to manage all functions.
- Ultra Bright White LED with 10k mcd (micro candle) – Low consumption but high efficiency for extra hours security light.
- New inside light with aluminum housing and heat sink (see the picture).
- Interchangeable battery module that is removed by simply unscrewing the recharge bushings (see the picture).
- Special software to optimize the discharge of the Ni-MH battery pack.
- Universal input battery charging system that is both small and light weight.
Charger information:
The new power supply has universal input power (90-260VAC, 50-60Hz).
Charging management system is inside the light and the charging status information is shown by the LED in the rear part of the light.
Color charging status:
Red = fast charge
Flashing Red + Green = trickle charge
NOTE: The LED in the power supply is green when plugged into an outlet.
6
FEATURES AND SPECIFICATIONS
MODEL
STANDARD POWER (W)
EFFECTIVE POWER (W)
BURN TIME (min)
BATTERY TENSION (V)
BATTERY CAPACITY (C=A/h)
BATTERY TYPE / BRAND SANYO
BATTERY POWER (W=VxC)
BULB EFFECTIVE LUMEN
TEMPERED 6mm LENS
BEAM TEMP. (K)
SWITCH SYSTEM
SWITCH SECURITY
CHARGE
CHARGE TIME 100% (h)
COMPARISON BETWEEN 50 W MODELS
OP 502 EX
OP 504 EX
50
60
65
72 (see note 1)
14.4
4.5
Ni-Mh
64.8
2000
DICROICH GLASS
5500 (see note 2)
ROTATIVE MECHANIC 3 POS
2 MAGNETIC PUSH BUTTON
BUILT-IN MECHANIC PIN
MAGNETIC SAFETY
EXTERNAL INTEGRATED AUTOMATIC CHARGING
5
7
LIGHT ELECTRONICS FUNCTION
MODEL
SOFT START
SMART LIGHT
SMART LIGHT 2
DIMMER (power %)
LED CAPACITY
UB WHITE LED 10K mcd
UB WHITE LED BURN TIME (h)
AUTO EXTINCTION
SOS
TEMPERATURE ALARM
SAFETY VALVE
COMPARISON BETWEEN 50 W MODELS
OP 502 EX
OP 504 EX
YES
YES
NO
NO
YES (see note 3)
100 - 50 - 25
100 - 50
YES
NO
YES
NO
100% BATTERY = 100 5% BATTERY = 4
YES
YES
YES
YES
YES
DIMENSION AND WEIGHT
DIAMETER (mm)
LENGTH (mm)
WEIGHT / DISPLACEMENT (Kg)
HOUSING
71
250
1.5 / 0.5
ALUMINUM
8
NOTE
NOTE 1
New software and hardware to manage the discharge.
Less loss of battery energy thanks to a new pcb stat up components.
Different management of battery and energy.
The new software give 10% more of burn time (see the graphic).
NOTE 2
The temperature of 5500 K is with the DICHROIC FILTER
The new battery discharge management software reduces
luminous power proportionately with battery capacity.
NOTE 3
120
OP 504 ex
OP 502 ex
65
72
Discharge Graphics Profile – Note 1
9
Anodize Color Options
Below different combination of possible Housing Anodize color.
NOTE: The Natural Gray + Black colors is the inexpensive option
Natural Gray + Black
Black + Black
10
Anodize Color Options
Blue + Black
Titanium Blue + Black
11
Anodize Color Options
Red + Black
12