Energy-Saving Lighting Options

Download Report

Transcript Energy-Saving Lighting Options

Energy-Saving Lighting
Options
Lighting Facts
•Accounts for 20% to 25% of all
electricity used
•Average household spends 5% to 10%
on lighting
•More energy used for lighting than to
run a refrigerator
•Increasing lighting efficiency will
decrease energy bills
Three Types of Lighting
•Ambient Lighting
•Task Lighting
•Accent Lighting
Fluorescent Lighting
•Used mainly for ambient & task
lighting
•3 to 4 times as efficient as
incandescents
•Can last 10,000 hours
•Quite different today than in the past
•Provide a wider range of color quality
Fluorescent Lighting
•Work well in new or existing fixtures
– indoors or outdoors
•Check CFL packaging for any
restrictions in use
–Some should not be used in enclosed
fixtures
–Many are made for specific fixtures
Light Output
•Lumens measure light output
•Watts measure energy
Example:
100 watt incandescent = 1,710 lumens
17 watts per lumen – 17 LPW
29 watt CFL = 1,750 lumens
63 watts per lumen – 63 LPW
Light Output
Incandescent Min. Output
CFLs
Watts
Lumens
Watts
40
450
9-13
60
800
13-15
75
1,100
18-25
100
1,600
23-30
150
2,600
30-52
Light Output
•Quality of CFLs is a concern for
consumers
•Two factors affect light’s harshness
–Color Rendering Index (CRI) – measures
on a scale of 0 to 100 the perceived color
of objects under artificial light
–Color Correlated Temperature (CCT) –
measures in Kelvin (K) the appearance of
the light itself – how “warm” or “cool” it
seems
Color Correlated Temperature
Ranges
•CFLs are available in a variety of CCT
ranges
–“Warm White” or “Soft White” 2700 K –
3000 K
–“White”, “Bright White”, or “Medium
White” 3500 K
–“Cool White” 4100 K
–Daylight 5000 K – 6500 K
Light Output & Cost
Comparisons
•Some LED lighting is a less ideal
replacement for traditional lighting
sources because of:
–Low light output
–Higher cost
–Color differences
Light Output & Cost
Comparisons
•LED lighting is a good alternative for
some lighting applications
–Outdoor lighting – landscaping or holiday
lights can benefit from LED durability
–Longevity of LED lights is a benefit for
lights that stay on for long periods or are
installed in hard-to-reach places
Simple Ways to Conserve Energy
Through Lighting
•Use daylight for indoor lighting
•Maintain lighting to enhance efficiency
•Turn off lights
•Clean or repaint small rooms
•Select light-colored or translucent
lampshades
•Decorate with lighter colors
Simple Ways to Conserve Energy
Through Lighting
•Place lamps in corners to reflect light
•Use dimmers, timers, & motion detectors
•Replace halogen torchieres with Energy
Star torchieres
•Use solar lights powered by photovoltaics
•Use task lighting
•Buy dedicated CFL fixtures
•Use low watt CFLs or an LED for
nightlights
CFL Disposal – Closing the Loop
•Mercury is an essential component of
CFLs
•No mercury released from CFLs when
bulbs are intact or in use
•EPA recommends taking advantage of
local recycling options for CFLs
•EPA is working with CFL
manufacturers & major US retailers to
expand disposal options
Change A Light, Change the World!
•Replacing one incandescent with an Energy
Star CFL can:
–Save enough energy to light 7 million homes
–Would result in a total savings of $600 million in
utility bills
•Replacing five most used light bulbs with
Energy Star CFLs can:
–Save you $60 per year in energy costs
–Result in a total savings of $8 billion per year
–Prevent greenhouse gases equivalent to emissions
from nearly 10 million cars
Energy-Saving Lighting
Options
Compiled
Deborah J. Taylor
NC Cooperative Extension
Orange County Center
Web Resources
•Consumer Guide to Home Energy Savings
www.aceee.org/consumerguide/lighting.htm
•Energy Star
www.energystar.gov
•Energy Hog
www.EnergyHog.org
•E-Conservation
http://e-conservation.net/
This presentation was produced by North Carolina
Cooperative Extension, Department of 4H Youth
Development and Family and Consumer Sciences
with funding from the State Energy Office, N.C.
Department of Administration