Transcript 40 MTPD Crystalline Ammonium Nitrate Plant

Please click on
our logo or any
link in this
presentation to be
redirected to our
website & email.
Thank You!
17A Marlen Drive w Hamilton, NJ 08691 w USA
Tel: (609) 586-8004 w Fax: (609) 586-0002
www.ippe.com
Paper Making Line Overview
This machine was designed to produce a wide range of paper, board and specialty
products. The machine is available with or without the Rotoformer. Complete engineering
documentation is available on site. This mill is immediately available.
Overview Summary:

124” Trim Fourdrinier Paper Machine with Rotoformer

Rebuilt in 2001 at a cost of $30,000,000.00+ USD for upgrades

The entire Wet End is all stainless steel and new in 2001

Basis Weight Range: 28-220 lbs/3,000 sq. ft. (45-355 GSM)
Paper Making Line Equipment
Stock Preparation:

3 Hydrapulpers

Stainless Steel Drum Thickener

BC Hydraflaker

(2) Valmet/Metso Optifiner MdI RF-1 Refiners (2001)

(1) BC Refiner Chemifiner MdI D-50

Voith Sulzer Multiscreen Stainless Steel (2001)

GL & V Cleaner MdI CLP-700-LD (2001)
(Some other Stock Prep items have been removed for other ongoing operations)
Paper Making Line Equipment
Forming Section (2001):

GL&V Cantilever Fourdrinier with 41’ Formation Table

(6) Foil Forming Boards

(3) Vacuum Foil Boxes

(4) Gravity Forming Boxes

24” diameter, Dandy Roll

(4) Vacuum Flat Boxes

139” x 24” diameter, Suction Couch Roll DF, 150” overall length

Voith Wire Shake control

Sandy Hill Top Rotoformer 2000, Stainless Steel, located over Wet Felt Presses

Sheets meet at the felt going into the first press
Paper Making Line Equipment
Headbox:

Mecfab, All Stainless Steel, Hydraulic,
Dilution Controlled (2001)

134” Slice Opening

(24) Auto-Actuators
Paper Making Line Equipment
Wet Presses (2001):

(3) Individual felted wet presses

1st Press: 24” diameter, Suction Couch Roll DF, 150” overall length

2nd Press: Blind Drill Bottom Roll with a bone hard top roll doctored

3rd Press: Solid Bottom Roll with a blind drill top roll doctored
(Entire wet end New in 2001)
Paper Making Line Equipment
Dryer Section (2001):

Forty-one (41) ASME Code Dryers for 75 PSI

3 Sections- 1st (8); 2nd (23); 3rd (10)

134” x 48” diameter Dryer Cans with rope rings

Anti-Friction Bearings

JHK Systems, Inc. Dryer Hood with individual pocket ventilation system (2001)
Paper Making Line Equipment
Size Press:

Inclined unit flooded nip, (1) Steel and (1) Rubber roll

Located between 3rd and 4th dryer sections

Latex/Coatings is applied to the sheet at this size press
Overhead Dryer:

Spooner Flotation Gas Fired Dryer (2001)

Located in between 2nd and 3rd Dryer Section
Paper Making Line Equipment
Calender Stacks:

Manchester 6 roll open frame Wet Calender Stack

Farell 2-roll 1000 PLI Finishing Stack, swimming bottom roll (Rebuilt 2001)
Track Reel:

Beloit horizontal 6’ long Track Reel. Primary and secondary arms
Paper Making Line Equipment
Slitter-Rewinder Rebuilt (2001):

Beloit Two-Drum Slitter-Rewinder
 Shaftless Rewind for 72” O.D. Rolls
 Tidland MSP Modular

Automatic Shear Slitting System
 Rated for 4000 FPM
 Roll Unloading Table
Paper Making Line Equipment
Drive & Control Systems (2001):

Complete ABB AC Sectional Drive

Circonix Process Management and Control System

Honeywell Proflow Controller
Process Equipment:

Complete Latex/Coatings Processing System including bulk storage tanks

Installed in 2001
Block Diagram
Contact Information:
MICHAEL JOACHIM
DIRECTOR, PLANTS DEPT.
Tele: 609-838-5930 (direct)
Mobile: 609-516-9107
[email protected]
SANJEEV REGE
VP GLOBAL PLANT SALES
Tele: 609-838-5938 (direct)
Mobile: 609-510-2616
[email protected]
Visit us at
www.ippe.com