Transcript E- Series Sales Presentation

Updated
E- Series
Electric
Proportioners
Markets Served
•
Reactor E-20/E-30
– Roofing
– Residential Insulation
– In-plant OEM
– Rim & Band Joists
•
Reactor E-XP1/E-XP2
– Waterproofing
– Tank coatings
– Potable water
– Wastewater treatment
– Line striping
– Manhole & sewer linings
– In-plant OEM
Reactor E-series Key Features
®
Digital User Controls
Energy efficient DC motor
NEW! Hybrid Heater Design
NEW! – Circulation Valves
• Redesigned for
isocyanate materials
NEW! – Modular Heater
Electronics
• Increase performance
and reliability
Optional Data Reporting
• Increases knowledge of
processed material
• Utilizes direct and mass
heating for increased
T
Quick Knockdown Fluid
Sections
Reactor E-20/E-30 for Foam
®
Reactor® E-20
Reactor® E-30
16 lbs/min (7.3 kg/min)
24 lbs/min (10.9 kg/min)
Maximum Fluid
Pressure
2,000 psi (13.8 MPa)
2,000 psi (13.8 MPa)
Heater Wattage
6 kW
10.2 and 15.3 kW
210 ft (64 m)
310 ft (95 m)
Refer to Sales Literature
300615
Refer to Sales
Literature 300615
Specification
Output @ 1,000 psi
Max. Hose Length
Power Requirement
Dimensions
(H x W x D)
Preliminary Weight
46 in x 31 in x 32 in
(117 cm x 79 cm x 81 cm)
340 lbs (154 kg)
400 lbs (181 kg)
Reactor E-XP1/E-XP2 for Coating
®
Specification
Reactor® E-XP1
Reactor® E-XP2
Output @ 1,750 psi
.9 gpm (3.4 l/min)
1.8 gpm (6.8 l/min)
Maximum Fluid
Pressure
2,500 psi (17.2 MPa)
3,500 psi (24.0 MPa)
Heater Wattage
10.2 kW
15.3 kW
210 ft (64 m)
310 ft (95 m)
Refer to Sales Literature
300615
Refer to Sales
Literature 300615
Max. Hose Length
Power Requirement
Dimensions
(H x W x D)
Preliminary Weight
46 in x 31 in x 32 in
(117 cm x 79 cm x 81 cm)
342 lbs (155 kg)
438 lbs (199 kg)
Reactor® System Components
 Select a Reactor
 Select Heated Hose
 Select Heated Whip Hose
 Select a Fusion Gun
 Select Supply Processing Components
• Supply Pump
• Agitator
REACTOR E- series
®
•
Sinusoidal motion
smoothes pump
changeover found in
traditional vertical
pumping systems
Proportioning Pump
High Pressure
Low Pressure
Fill Stroke
Discharge Stroke
Proportioning Pump Linkage
Iso Pump Lube System
Minimizes Iso build-up on pump shaft
Digital User Controls
Temperature Controls
Pressure/Motor Control
Stop
Common Error Codes
Can be mounted up to 300 ft. from Reactor®
Temperature Controls
Pressure/Motor Controls
Digital User Controls
• System diagnostics with error codes
• Automatic system shutdown when user
defined pressure imbalance is detected
• Data Reporting Kit (optional)
– Reports spray application data
Hybrid Heater
• Combines high mass and direct
contact designs for increased
Heater efficiency
 Less time required to reach
spray temperatures
 Increased efficiency in colder
ambient temperature climates
High Mass
Direct Contact
Hybrid
NEW – Electronic Controls
Communication Board
• New electronics increases
LED Lights –
control and accuracy
indicate system
• New electronics design
status
– Increased reliability
– Reduced downtime
• Heater Board divided into four
components
– 1 Communication Board
– 3 identical Heat Boards
• Control Iso, Resin and Hose
Heating zones
– Each Heat Board is
interchangeable with the
Iso, Resin and Hose Heat
other
Boards
NEW – Circulation Valves
• Specifically designed for use with
Isocyanate materials
– Increased product performance
and reliability
• Increased response when balancing
material pressures
• Color coded for easy identification
– Red valve for Isocyanate or “A”
materials
– Blue valve for Resin or “B”
materials
Grease fitting lubricates seals
to prevent Iso crystallization
Simplified design
incorporates seal into valve
body
Thank you!