Transcript SMME Presentation - National University of Sciences and

SCHOOL OF MECHANICAL &
MANUFACTURING ENGINEERING (SMME)
Where science is converted into technology
RESEARCH
EDUCATION
FOCUSING ON
COMMUNITY
SERVICE
INDUSTRY
SUPPORT
SMME Facts & Figures
Established in :
SMME
First Post Graduate Entry:
Where
science
is
converted
into
technology
PG Degree Awarded:
Current PG Enrollment:
ME: 77MS &
3PhD
DME: 68MS &
5PhD
2009
2009 (Ind. & Manuf. Eng.)
49
247+11
RIME:36 MS &
3PhD
First Undergraduate Entry :
BME: 11MS
BMS: 55MS
2009 (Mechanical Eng.)
UG Degree Awarded:
119
Current UG Enrollment :
346
SMME Facts & Figures
SMME
No of Class Rooms, Labs, Conference Room and Seminar Hall
Class Rooms
Where
science
is
converted
into
technology
12
Labs
12
Seminar
Hall
1a
Conference Multi-purpose
Room
Hall
1b
1c
a) Seating Capacity is 190
b) Seating Capacity is 30
c) Seating Capacity is 60
Faculty Details
19 Foreign PhD + 2 Local
7 Foreign MS + 1 Local
3 Lab Engineer
29
Study Leave: 3x PhD, 3x Lecturers and 4x Lab Engineers
SMME Research Activities
SMME
Where
science
is
converted
into
technology
Year
Conferences
Journals (Non
ISI)
ISI Impact Factor
Journals
2013
23
8
25
2014
30
5
22
ISI Journal Target for 2014 (Research Directorate) = 27
SMME Live Projects
Total live funded projects : 11
SMME
Where
science
is
converted
into
technology
Project Title
PI
Tribological study of Engine Valve Train (PSF Funded)
Dr Riaz Mufti
Mercedes Benz OM 646 Project
Dr Riaz Mufti
Cummins - B project
Dr Riaz Mufti
Artificial Knee Joint Project
Dr Liaqat Ali
Design and Modification of Dinosaur and Solar System
Dr Liaqat Ali
Open Source Platform for Numerical Simulation (OPN)
Dr Sajid
Investigating the Film Strength in a Dynamically Loaded
Dr Mushtaq
Bearing Using Localized Capacitance Technique
Khan
Modeling and robust control of grid connected
Dr Mohsin
converters
Jamil
PEFMA Fan Project
Dr Shahid Ikram
A Functional Stent-graft for the Treatment of
Dr Murtaza
Oesophageal Cancer
Najabat
Development of Mobile Automotive Technology Test-bed
7/16/2015
Dr Samiur
Rehman
SMME Completed Funded Projects
SMME
Where
science
is
converted
into
technology
Completed industrial projects : 13
Project Title
PI
Engine Health Monitoring System
Dr Riaz Mufti
Radiator Leak Detection System
Dr Riaz Mufti
Engine Dyno Control System
Dr Riaz Mufti
Engine Blowby Measurement System for Power Units Dr Riaz Mufti
Audi TDI Engine Valve Train Project
Dr Riaz Mufti
Slip Roll Ratio Measurement on Low Friction Valve
Dr Riaz Mufti
Trains
Design and Development of Test Cell for Green
Dr Riaz Mufti
Engines
Rapid Prototyping of casing for secure comm. device Dr Mushtaq Khan
Manufacturing of (EC) CNC Parts
Dr Liaqat Ali
Manufacturing of CNC Parts
Engr N. Hassan
Aurigen APU Test Rig
Engr N. Hassan
Quality Control Solution for football shape analysis
Development of 5 km range unmanned helicopter
along with all its system
Mr Emad ud Din
Dr Irtiza
SMME Completed Funded Projects
SMME
Completed projects (Funding Agency) : 6
Where
Project Title
science Low Cost Electric Bike and Electric Vehicle
is Tool Analysis for the Drilling of Hard Rocks in
converted Petroleum
Fabrication of Jatropha Biodiesel Prototype Pilot
into Plant
of Production / Manufacturing System
technology Feasibility
set
PI
Dr Riaz Mufti
Dr Hussain
Imran
Engr N.
Hassan
Dr Shahid
Ikram
Development of a base platform for Arial Robotics Dr Irtiza Ali
Development of 10 km range flight control system
Dr Irtiza Ali
for helicopter developed at SMME
Funded by
EnergenHEC
HEC
ST Venture
HEC
NUST
NUST
Patents Filed Through SMME Platform
Total Patents: 14
SMME
Where
science
is
converted
into
technology
1. Development of engine blow-by meter RAM-BB2, Patent Application No:
854/2011.
2. Oil film thickness measurement system for engine journal bearings using
localized capacitive technique, Patent Application No: 188/2013
3. Development of engine blow-by meter based on micro controller, Patent
Application No: 190/2013.
4. Technique and apparatus for engine tappet speed monitoring system,
Patent Application No: 189/2013.
5. Engine direct acting follower rotational speed measuring system, Patent
Application No: 507/2013
1. Auxetic structures and their application in non-vascular pathologies (Patent
Dr Murtaza
Application No. 104/2013)
Najabat Ali
2. Anisotropic stent device for the treatment of coronary heart disease
3. Skeletal Plate system with unique features for the repair of tubular and flat
fractured bone (396/2014)
Dr Umar Ansari 1. Counter-intuitive Auxetic intramedullary bone stent and a method for treating
long bone fractures
2. Intelligent Bandage with drug dispensation and adjustable porosity system for
topical wounds
3. A Multifunctional Device that Promotes Wound Healing through Drug Delivery
and Exudate Removal” 401/2014
1. Vision based Automatic mold Positioning System in a Sand Casting Process
Dr. Shahid
(Patent Application No. 696/2013)
Dr. Imran
1. Pin on Disk Tribometer (Patent filed on 28/10/2013)
Dr Riaz Mufti
Dr. Yasar
1. Robotic Mannequin, Patent Application No: 332/2013
SMME Commercial Products
SMME
Vision Based Quality Control Solution for
Football Shape Analysis
Designed for the sports industry
One unit sold. Other football manufacturers also interested to purchase.
Where
science Designed and Developed by Mr Emad ud Din
is
converted
into
technology
SMME Commercial Products
SMME
Engine Health Monitoring System
Where
science
is
converted
into
technology
13 units sold to four different companies.
Request received from other OEMs.
Manufacturing to start again by end 2015.
Designed and Developed by Dr Riaz Mufti
United
Traders
SMME Commercial Products
Radiator Leak Detection System
SMME
Designed especially for the radiator/heat
exchanger manufacturers.
Where
science Received request for second unit from
same company.
is
converted Designed and Developed by Dr Riaz Mufti
into
technology
7/16/2015
NEW
SMME Commercial Products
Automotive Engine Test Cell
SMME
Designed and developed complete engine
test cell with drive by wire mechanism.
Where Developed for Millat Tractors Limited. Other
science OEMs also interested to have such facility at
is their site.
converted Designed and Developed by Dr Riaz Mufti
into
technology
7/16/2015
SMME Commercial Products
SMME
Engine Test Dyno Control System
Engine Dyno Control System designed and
developed for testing heavy duty diesel
engines.
Where
science
Developed for Power Vision Limited. Other
is OEMs interested to upgrade their existing
converted testing facilities using this system.
into Designed and Developed by Dr Riaz Mufti
technology
SMME Commercial Products
SMME
Where
science
is
converted
into
technology
Auxiliary Power Pack Unit
Designed and integrated for the
Defence (HIT).
2 Units produced and delivered.
Further orders expected.
Designed and Developed by Engr. M.
Naweed Hassan.
SMME Commercial Products
SMME
JATROPHA BIO DIESEL PLANT
Designed for STV to produce bio
diesel from Jatropha seeds.
Where
science
is
converted
into
technology
Designed and Developed by Engr. M.
Naweed Hassan.
Can be commercialized
Solar Powered Electric Bus
Developed for NUST.
Designed and Developed by Engr. M.
Naweed Hassan.
Can be commercialized
Revenue Generated Through Industrial
Projects
SMME
Rs. 1.823 Million, (last 3 years)
Where
science
is
converted
into
technology
University share
Hardware received from Industries for Research :
 Cummins-B Test Rig
UK oil company Rs. 17 M, (Dr Riaz Mufti)
 SCXI DAQ System
National Instruments (USA) Rs. 1.5 M, (Dr Riaz Mufti)
 Mercedes Benz 646
USA oil company Rs. 0.9 M (Dr Riaz Mufti)
 Toyota Prius 1NZ
UK oil company Rs. 0.8 M (DR Riaz Mufti)
 Electric Wheel Chairs
Japanese company Rs. 2.4 M (Dr Yasar)
 Auto System Models*
Sanco (Pakistan) Rs. 1.1 M (Dr Shahid Ikram)
* For teaching
Achievement Awards
SMME
Where
science
is
converted
into
technology
Awards Received by SMME Faculty Members
• NUST Best Innovation and Commercialization Award (Dr Riaz Mufti)
• NUST Best Teacher Award (Dr Yasar Ayaz)
• HEC Best Innovator Award (Dr Riaz Mufti)
• FPCCI Acheivement Award (Gold Medal) (Dr Riaz Mufti)
• Automotive Innovation Award, Innovation Summit 2013 (Dr Riaz Mufti)
Research Facilities
Where
science
is
converted
into
technology
MANUFACTURING
• CNC Machines 3-axis CNC Milling, 2-axis CNC Lathe
• Rapid Prototype Lab FDM , 3 D Scanning
• Reference Room FAROARM, Profile Projector
• Tool Calibration Equipment
• CAD-CAM PG Lab WIND CHILL (PLM software), PRO-E
• CIM Lab
• Heat Treatment Lab
AUTOMOTIVE
• Engine Valve Train Test Rig
• Engine/Chassis Dynamometers 750 bhp, 1100 bhp
• Data Acquisition Systems NI Hardware
• Engine Exhaust Analyser and Smoke Meter
• Vehicle Diagnostics System
• Fuel Consumption Measurement
Research Facilities
Where
science
is
converted
into
technology
Robotics
• NAO Humanoid Robots
• Pioneer 3AT Mobile Robots
• Bumblebee Stereo Vision
• NUSTBOT-3 Humanoid Robot
• Lego Mindstorm
Control Systems
• Active Suspension
• 3D Crane Model
• Magnetic Levitation
• Gyroscope
Aerial Robotics Lab
• Remote Controlled Helicopter
Platforms
PCB Lab
• LPKF PCB Facility
Bio-Medical
• Biosignal recording units
• Hand motion digitizer
• Electrospinning machine
• Laser cutting machine
• Spin coater
• UV/VIS
Spectrophotometer
• PCR thermal cycler
• Ultralow temp freezer
• Refrigerated Centrifuge
Research Facilities
Manufacturing Resource Centre (MRC) Capabilities:
Machine Shop: Turning, Milling, EDM (Wire Cut & Die-Sinking), CNC (Turning &
Milling), Surface Grinding and Radial Drilling.
Where
science
is
converted
into
technology
Wood Working Shop: 4x Turning Lathe, Band Saw, Combination Machine, Sanding
Machine and 4x Working Stations. The shop also has a patron making facility.
Welding Shop: ARC Welding, Gas Welding, Spot Welding, TIG Welding and Plasma
Cutting.
Electrical Shop: Single & Three Phase Test Boards, 5x Working Station, 3x Soldering
Stations, 2x Winding Stations and 1x Electrical Machine Testing Benc
Foundry Shop: Conventional Sand Casting facility and Induction Furnace (for melting
of ferrous and non ferrous materials).
Forging Shop: 5x BS Forges and Pneumatic Hammer (10 Tons).
Bench Fitting Shop: Hand Operations (Grinding, Taping, Drilling and Filing etc).
Sheet Metal Works: Sheet Bending, Pipe Bending and Stamping Press.
Surface Treatment: Zinc, Copper, Chrome and Nickel Plating with parts Galvanizing
Facility.
Research Groups
SMME
Where
science
is
converted
into
technology
• Bio-medical Engineering Sciences and Technology (BEST)
• Design and Manufacturing Research Group (DMRG)
• Robotics and Intelligent Systems Engineering (RISE)
• NUST Arial Robotics (NU’ STAR)
• Automotive Research Centre (The ARC)