Transcript Diapositiva 1

Engineering and Industrial Development Centre
“Generating value through knowledge”
2008
ACTUAL CAPACITIES
R&D AND SPECIALIZED SERVICES ON COMPOSITE
STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING
TECHNOLOGY
Autoclave, Econoclave 2×4,
ASC Process Systems
 Composite material specimen preparation. Hand lay up with prepreg.
Preparation in autoclave and hot plates compression press. (laminates of
fiber reinforced composite materials with polymeric matrix, different fiber
orientation).
 Determination of mechanical properties; complete characterization
considering the material anisotropy. Tension, compression, bending
testing at temperatures -129 a 540°C.
Manual Hydraulic
Compression Press, Q-230H,
PHI
 Fatigue and fracture analysis of composite materials: High cycle fatigue,
low cycle fatigue, fracture toughness, Poisson modulus, interlaminar
shear, dynamic testing.
Mechanical Testing System
MTS-810
 Nondestructive testing of composite materials, using ultrasonic with
phase arrays, immersion ultrasonic, “C” scan, Lamb waves, acoustic
emission, radiography, infrared thermography.
 Failure analysis of composite materials using optical microscopy and
Instron 8872
scanning electron microscopy.
 Noise and vibration analysis.
SEM
2008
ACTUAL CAPACITIES
R&D AND SPECIALIZED SERVICES ON COMPOSITE STRUCTURES
DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY
 ASTM D 3529/D 3529M – 97 (Reapproved 2008) Standard test method for
matrix solids content and matrix content of composite prepreg.
BODE 100 - PC Controlled
vector network analyzer
OMNISCAN MX PA, OLYMPUS
 ASTM D 3530/D 3530M – 97 (Reapproved 2008) Standard test method for
volatiles content of composite material prepreg.
Ultrasonic immersion system
 ASTM D 3531 – 99 (Reapproved 2004) Standard test method for resin flow of
carbon fiber-epoxy prepreg.
Hopkinson bar
 ASTM D 3532 – 99 (Reapproved 2004) Standard test method for gel time of
carbon fiber-epoxy prepreg.
Noise and vibration analysis
Infrared thermography
2008
ACTUAL CAPACITIES
R&D AND SPECIALIZED SERVICES ON METALLIC STRUCTURES
DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY
 MECHATRONICS
FOR INDUSTRY. Turnkey automation solutions:
Assembly & automated manipulation; Machinery for special testing
 ASSEMBLY. Design and integration of solutions in: Automated transport &
transfer systems; Handling & integration of robots; Positioning & indexing
systems. Insertion, clamping, riveting & other assembly operations.
 MACHINING. Machining Solutions: Automated drilling systems; Automated
regrinding systems; Other machining operations.
 TESTING. Design of special machines for inspection testing: Machines for
inspection in industrial laboratories; Machines for automated testing;
Machines for the inspection and operations of in-line testing; Optical
machines.
 AUTOMATION SIMULATION AND MACHINERY ANALYSIS. FEM & dynamic
analysis; Production line simulations & human factors.
 APPLIED ELECTRONICS. Integrated systems in industrial inspection for:
Product quality checking, detection of defects; Barcode inspection in 1d &
2d; Assembly verification; Inspection of dimensions.
2008
ACTUAL CAPACITIES
R&D AND SPECIALIZED SERVICES ON METALLIC STRUCTURES
DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY
ADVANCED MANUFACTURING
 Product Design: Design and development of structural components for
manufacturing processes and assembly with DELMIA-CATIA (Robotics
simulations & work cells design)
 Modeling and simulation
 Plastic and other materials prototype manufacturing
 Rapid prototyping by stereolitography
 High speed and high precision machining
 Die and tooling manufacturing
 Manufacturing processes development
 Optimization of operations sequence, production logistics and production
diagnostic systems.
(Aluminum, Stainless Steel, Alloy Steels, Titanium, Engineering plastics)
2008
ACTUAL CAPACITIES
NDT
NON DESTRUCTIVE INSPECTION
(MM-063-006/08)
 Radiography (RT) Testing
 Ultrasonic Testing
 Magnetic Particle Testing
 Leak Testing
 Eddy Current Testing
Certified Personnel
ASNT LEVEL III AND NAS 410
 Visual testing
 Fluorescent
penetrant
aerospace components
examination
in
2008
ACTUAL CAPACITIES
Acredited on
ISO-IEC-17025-2005
(NMX-EC-17025-IMNC-2006)
OTHER METALLURGICAL SERVICES
 Metallography and Failure Analysis
(MM-0031-006/08)
 Chemical Analysis
(Q-093-073/09 ema)
 Mechanical Testing
(MM-065-006/08)
2008
ACTUAL CAPACITIES
METROLOGY SERVICES
 Management of metrological confirmation programs of
measuring equipment.
 Installation and set up at operation of calibration
laboratories.
 Specialized training in Metrology (Courses and Diplomas).
 Specializes Consulting in measurement assurance with the
MESURA program ®
institutions.
by CENAM and
technological
 Development of models and software for estimating
uncertainties in measurement processes.
 Development and manufacture of measurement equipment.
2008
ACTUAL CAPACITIES
METROLOGY SERVICES
Accreditation NMX-EC-17025-IMNC-2006
Certification NMX-CC-9001-IMNC-2000
Calibration and Measurements:









Dimensional Qro. (D-39 ema), S.L.P. (D-102 ema), G.M. Silao (D-108 ema)
Mass (M-31 ema)
Density (DEN-06 ema)
Volume (V-19 ema)
Flow (FL-14 ema)
Pressure (P-58 ema)
Temperature (T-24 ema)
Humidity (H-09 ema)
Torsional torque, S.L.P. (PT-19 ema)
CANHEFERN
 Electric (E-85 ema)
 Time & Frecuency (TF-14 ema)
MIDE
 Gas Flow (FL-016 ema)
2008
POTENTIAL CAPACITIES
POTENTIAL CAPACITIES ON R&D AND SPECIALIZED
SERVICES (no equipments available)
 Flammability analysis
 Permeability and water absorption analysis
 Porosity analysis
 Effect of humidity in composite materials
 Electrical discharge reception in composite materials
 Inspection by shearography
 Environmental conditioning
 High velocity impact testing
 Other validation tests, according with special client
requirements
2008
IDENTIFIED COLLABORATION OPPORTUNITIES CoopAIR - CIDESI
PROJECTS OF INTEREST
7.1.1. THE GREENING OF AIR TRANSPORT
7.1.1.1. Green aircraft
ATT 2010.1.1-2 Aerostructures
7.1.3. ENSURING CUSTOMER SATISFACTION AND SAFETY
7.1.3.3. Aircraft safety
ATT 2010.3.3-1 Aerostructures
7.1.4. IMPROVING COST EFFICIENCY
7.1.4.1. Aircraft development cost
ATT 2010.4.1-1 Design Systems and Tools
ATT 2010.4.1-2 Aerostructures
7.1.4.2. Aircraft operational cost
ATT 2010.4.2-4 Systems
7.1.6. PIONEERING THE AIR TRANSPORT OF THE FUTURE
7.1.6.1. Breakthrough and emerging technologies
ATT 2010.6.1-4 Life-cycle
7.1.6.2. Step changes in air transportation
ATT 2010.6.2-2 Guidance and control
COORDINATOR
Dr. Carlos Rubio González
Dr. Ulises Sánchez Santana
Dr. Carlos Rubio González
Dr. Ulises Sánchez Santana
Dr. Hugo Gámez Cuatzin
Dr. Hugo Jiménez Hernández
M.C. Antonio Ramírez Martínez
Dr. Carlos Rubio González
Dr. Ulises Sánchez Santana
Dr. Manuel Bandala Sánchez
Dr. Luis del Llano Vizcaya
Dr. Luis García Valdovinos
Dr. Luis del Llano Vizcaya
M.C. Julio César Solano Vargas
Dr. Luis García Valdovinos
“Generating value through knowledge”
Dr. Hugo Jiménez Hernández
2008
Engineering and Industrial Development Centre
Tank you very much
“Generating value through knowledge”
2008