Transcript Chisel lourd de 2.50

Kverneland
Cultivators CLC Evo
Product information 2015
Kverneland CLC Evo
Versatile cultivator for all conditions
CLC Evo
Range overview
CLC Evo
2
CLC Evo Wings
900mm
1
R:2.50-3.00-3.50-4.00m
F: 3.80-4.40-4.90m
R:3.00-3.50-4.00m
F:3.80-4.90m
Knock-on as standard
CLC long tine
CLC long tine
Only Hollow disc
Only Combi or Double
disc
Solo with rollers
CLC Evo – Working width from 2.5 to 4.9m

2 bar frame new generation made
of 100mm box section using
similar frame structure as the 3
bar CLC pro series.

Bolted tine holders as standard

For working depth from 5 cm
down to 40 cm

Evo and Evo “Wings” variants
based on same frame offering
multiple combinations

Frames:
 Rigid 2,50m up to 4,00 m
 Folding from 4,00 to 5,00 m
CLC Evo - Rigid frame concept
Bolted tine holder
as a standard for
the full range
The new CLC Evo frame is basically the same
structure as the “CLC pro” line. Headstock, tine
holder, and power ability have been aligned for
the 2-bar and 3-bar frames.
Max power range:
-3,00m : 240hp
-3,50m : 270hp
-4,00m : 300hp
New bolted headstock
as on the CLC pro
line
8mm beam thickness
for both front and
rear beam
CLC Evo - Folding frame concept
The new CLC Evo folding frame is also based
on a similar structure like the “CLC pro” line. The
main frame is 100% the same but is just a row
shorter.
Very new on the folding CLC Evo models is the
possibility to get bolted tine holders as a
standard (was not available on CLC)
Max power range:
-4,00m : 300hp
-4,50m : 320hp
-5,00m : 350hp
Bolted tine holder
as a standard also
on fold model
8mm beam
thickness for both
front and rear
beam
The 3 critical phases of a frame development
FEM calculation
• The Finite Element Method is a computer simulation
helping to design each element according to the data and
is securing the first step of the development.
Shaking test
• at full load on a shaking robot during a specified period
• replicate the machine lifetime over few weeks to control
de reliability of the structure
Strain gauge test
• physical tests in the field and in transport by using strain
gauges which can register the real stress in the material.
• By cross-checking with the 2 previous phases the
structure maximum power allowance can be approved
Benefit:
We are using this know-how for all our new products. In
parallel, a protocol of functional tests is managed in
various countries to collect farmers opinion. We are
investing a lot to guarantee the best performances.
CLC tine – Bolted tine holder
The CLC line is getting as a standard the
bolted tine holder for all models.
Benefit:
 easy to take few tines away when
using the CLC models as loosener
 less welding on main frame is more
reliable and giving the all structure a
longer life time.
CLC tine – High clearance
870.mm
• the high under beam clearance of 870mm is
ensuring blockage free operation
CLC tine – Maintenance free zone
• well proven simple and robust design with no grease
nipple at all = low maintenance (due to heat treatment by
cementation no wearing between the parts, no greasing
necessary)
• Unique leg design made out of a tube enabling the C
shank to move side ways +/- 14 cm with the short tine,
and +/-20 cm with the long tine, each side, thus reporting
less stress to the structure
• light weight concept, complete tine is only 35kg.
•User friendly technology
70x40mm
CLC tine – Special angle
2
α
1
•
Always the best penetration ability in all soil
•
The power demand and the fuel consumption are
limited.
1.
point is working by lifting the ground to
make a perfect cracking of the top layer
2.
the upper part is doing an intensive mixing
also with low power demand due to its
receding shape.
Benefit:

This particular angle design offering 2 distinct
front lines is avoiding to flick poorer soil back on
top of the ground, interesting when such
cultivator equipment will be used for preparing
seedbed in one pass.
CLC tine - Flexibility
• All parts of the tines are heat treated, providing
an extraordinary reliability and long life
• Extraordinary vibration capacity providing
intensive crumbling.
• Unique leg design made out of a tube
enabling the C shank to move side ways +/- 14 cm
with the short tine, and +/-20 cm with the long tine,
each side, thus reporting less stress to the structure
• This technique is also allowing to use lighter
material, in order to save lifting capacity and
pulling requirement
• Here is a tine in our laboratory showing how far it
can flex. The side pulling force to go up to 20 cm is
1,200kg. The tine holder stays in place, just the leg
is flexing due to the heat treated tube
CLC tine - Flexibility
CLC tine – Auto-reset
Benefit:
 Higher pressure, at 5cm for a total of 640.kg interesting when
hard dry soil
Frame protected all the time
Unique on the market : the release force decreases when the
release height increase
CLC tine – Shear bolted leg
The shear bolt leg design is providing a Vibromat effect
Benefit:
 higher pressure at the point with 2T to ensure a clean
breaking of the bolt
 Vibromat effect: the tine being made from a tube is
flexible enough to allow the point to trip 10 cm back before
the bolt is breaking. In that way the Vibromat is is avoiding
too frequent breakage even being only shearbolted
 This short tine can still go 14cm sideways around
obstacles, reporting less stress to the tine holder and frame
 Shearbolt and Leaf spring pack can be combined, so that
the spring pack will get 2T pressure also before releasing,
interesting in very heavy soils to keep the tines in and
avoiding the driver to change the bolt immediately.
 longer life time
CLC tine – Bolted shares
CLC tines: high quality and
low cost wearing parts made
in Kverneland
Standard share 60mm
Standard share + 300mm wing
• reversible plough share
• adapted to shallow working depth
• low cost
• good boiling effect
• quality heat treatment
• quality heat treatment
CLC tine –
10’’
Fast and
easy metal
change
KO 80
•
KO 150
KO 250
KO 320
Quantum 345mm + KO 80
Multiple combinations of shares and deflectors can be fitted to the CLC tine to get
optimum result whatever the soil conditions.
•
Full range of shares available to match with all tine spacing from 200 to 345 mm
•
Easy adptation to depth to minimize fuel consumption
•
Only a hammer and a wedge needed
•
Get more details in the separate Knock-on Presentation
CLC tine – Carbide equipment
Dorset Tiger point 80mm
•
•
•
•
•
Dorset Tiger point 150mm
2 dimensions : 80mm and 150 mm
Compatible with all Knock-on deflector and Quantum share
345mm
Exteremely long life
Resist against stony conditions
Low power consumption required due to the progressive shape
CLC Evo – Discs equipment
Double disc gang  510 mm
• Position controlled with pins
• Parallelogram to obtain the best possible work
• Easy angle adjustment with bolts.
• Does a good mixing and incorporation
• Not compatible with rollers
• Leaves a rough surface with aggregates ready for wintering,
interesting at the end of autumn season for preparing spring fields and
crops
New Combi disc:
• Combination of a single disc gang with all roller type
• intensive mixing and incorporation, well adapted to high amount
of residues
• Very good levelling capacity
• Hydraulic setting of the disc gang
• Pair of border disc as standard
• New bearing holder clamped to the beam to slide gangs for fine tuning
• New angle adjustment allowing full depth of the parallelogram system
CLC range – Rollers
Actipack roller  560 mm
Make it as aggressive as you want
• Skid and knives between discs clean even in wet conditions.
The knives are cutting bigger clods coming in the disc spacing of
12,5cm leaving a ready seedbed
• Knives pressure can be adjusted as high as the disc pressure to
the ground to make equal pressure through the working width to
achieve a nice and firm seedbed, and can also be put in a non
working position to leave a rough ground surface with more clods
(weather protected)
• Maintenance free bearings with 5 lips labyrinth sealing
system + steel protection cover
• 3 different positions of the knives aggressiveness are proposed +
1 “OFF” position. They are adjusted thanks to the long spanner
• Can work with or without knives
• No limitation in stony conditions
• Discs with aggressive notched shape to ensure good driving
CLC range – Rollers
Actiring roller ø 540mm
• Light and active due to the skids between the rings that avoid
blockages.
• The knives are cutting bigger clods coming in the disc spacing
of 12,5cm leaving a ready seedbed
• Ring made with L profile.
• Light and strong construction
• Good recompaction (160 kg/m)
•Shaft diameter: 50 mm
Unique knives pressure adjustment
• Knife pressure can be adjustable to ensure a fine crumbled
seedbed or rough surface
•3 different positions for the knives pressure are available. They
are adjusted thanks to the long spanner delivered with the
machine
• Maintenance free bearings with 5 lips labyrinth sealing
system + steel protection cover
CLC range – Rollers
Actiflex roller ø 580mm
•
•
•
•
•
•
•
•
Intensive mixing effect
Self-cleaning effect
Low sensibility to blockages and stony conditions
Good compromise between recompaction and cost
(160kg/m)
For all soil types
Maintenance free bearings with 5 lips labyrinth sealing
system + steel protection cover
Low sensibility to wearing soil
Shaft diameter: 50 mm
CLC range – Rollers
Cage roller  550 mm
• 10 bars for a good loading capacity
• Effective crumbling action
• Economic roller
• For light to medium soil
• Shaft diameter : 50 mm
• Weight : 90kg/m
New Double cage roller  400 mm (tube/flat)
• Good crumbling
• Precise depth control
• Good levelling effect
• Good carrying capacity
• New robust frame and suspension design
Flexline  585 mm
• Good reconsolidation of light soil
• Individual scraper adjustment to avoid blockages
• Universal and suitable for all soil type
• Good carrying capacity
• Maintenance free
bearings with 5 lips
labyrinth sealing system
+ steel protection cover
CLC range – Solo roller
All roller equipments can be mounted
solo with no levelling device for all CLC
Evo models
CLC – depth control
Equipement recommanded when use of double
disc gang option, and from 4,50m working width
Wheels 600x9 (540x160) on rigid models
• AW profil AW for better cleaning
• high load capacity (10-PR)
• high resistance to punches
• valve is protected
• setting with sliding arm and pin
Wheels 10.0/80-12 (710x274) on folding models
• AW profil AW for better cleaning
• high load capacity (10-PR)
• high resistance to punches
• good carrying capacity
• valve is protected
• infinite screw adjustment
CLC Evo – Technical data
Rigid
Models
CLC Evo 250
CLC Evo 300
CLC Evo 350
Rigid
Rigid
CLC Evo
CLC Evo
13 350
11 300
Models
CLC Evo
Number of tines CLC Evo
9 250
Rigid
CLC Evo
CLC Evo
9 350
7 300
13
Number of tines CLC Evo WingsModels
9- 250 CLC Evo
11
Models
CLC
Evo
250
CLC
Evo
300
CLC
Evo
3,50
Working
width
(m)
2,50
3,00
13
9 350
911
Number of tines CLC Evo Wings
7
13
Transportof
width
(m)
9
3,50
911
Number
tines(m)
CLC Evo Wings
7
Working
width
2,50
3,00
9
Row spacing
(mm)
3,50
Number
of
tines
CLC Evo Wings
7
Working
width
(m)
Transport
width
(m)
2,50
3,00
Frame
box
section
Working
width
(m)
Transport
width
(m)(mm)
2,50
3,00 100x100 3,50
Row
spacing
(mm)
Linkage
II & III 3,50
Transport
(m)(mm)
2,50
3,00 Cat
Row
spacing
(mm)
Frame
boxwidth
section
100x100
Underbeam
clearance
(mm)
Row
spacing
(mm) (mm)
Frame
box section
100x100
Linkage
Cat
II & III
Average
tine
spacing
(mm)
265
265 Cat
Frame
box
section
(mm)
100x100
Linkage
II & III 265
Underbeam
clearance
(mm)CLC Evo
Min/Maxtine
HPclearance
CLC
Evo (mm)
65/200
80/240
265
Linkage
Average
spacing
265
265 Cat II & III95/270
Underbeam
(mm)CLC Evo
390
Average
tine
spacing
(mm)
CLC
Evo
Wings
420
95/270
265
Underbeam
Min/Max
HPclearance
CLC Evo (mm)
65/200
80/240
265
265
1980
265
Weight (Kg)
Evo
+ Combidisc
+ Actiring
1555
1805
390
95/270
265
265
Average
tine
spacing
(mm)
CLC Evo Wings
420
Min/Max
HP CLC
CLC
EvoAR*
65/200
80/240
1880
95/270
Wings
AR*
+ Levelling
disc + Actiring
1630
1980
390
Min/Max
HPCLC
CLC
EvoAR*
65/200
80/240
Weight
(Kg)
Evo
+ Combidisc
+ Actiring
1555
1805
Average
tine
spacing
(mm)
CLC Evo
Wings
420
390
Lifting capacity
(t)
CLC
Evo+ Combidisc
AR*
+ Actiring**
4,4
4,8
5,4
1880
1980
Average
tineCLC
spacing
(mm)
CLC+Evo
Wings
420
Weight
(Kg)
Evo
Wings
AR*
+Combidisc
Levelling
disc
+ Actiring
1630
AR*
+ Actiring
1555
1805
1980
1880
AR*
Combidisc
+ Actiring
1555
1805
Lifting
CLC
Evo+ AR*
+ Actiring**
4,4
4,8
5,4
Weightcapacity
(Kg) CLC(t)
Evo
Wings
AR*++Combidisc
Levelling
disc
+ Actiring
1630
1880
Weight
(Kg) CLC(t)
Evo
Wings
AR*+Bolt
+Combidisc
Levelling disc
+ Actiring
1630
AR* = Auto-Reset
/CLC
SB*
= Shear
Lifting
capacity
Evo
AR*
+ Actiring**
4,4
4,8
5,4
Lifting
capacity
(t)if/CLC
Evo
AR* +Bolt
Combidisc
+ Actiring** for Actipack or double
4,4 disc gang 4,8
5,4
** Consider
-15%
cage
equal
for Actiflex/+15%
AR*
= Auto-Reset
SB*
=roller/
Shear
**
Consider
-15%
if
cage
roller/
equal
for
Actiflex/+15%
for
Actipack
or
double
disc
gang
AR* = Auto-Reset / SB* = Shear Bolt
AR*
= Auto-Reset
Shear Bolt
**
Consider
-15% if/ SB*
cage=roller/
equal for Actiflex/+15% for Actipack or double disc gang
** Consider -15% if cage roller/ equal for Actiflex/+15% for Actipack or double disc gang
Fold
CLC Evo 400
CLC Evo 400
CLC Evo
15 400
CLC Evo
11 400
15
CLC Evo
13 400
CLC Evo
11 400
13
CLC 4,00
Evo
15
11 400
CLC 4,00
Evo
13 400
11
15
11
4,00
11
900
4,00
4,00
900
4,00
900
870
900
265
870
110/300
265
870
360
110/300
265
870
2285
265
360
110/300
2135
110/300
2285
360
360
6,2
2135
2285
2285
2135
6,2
2135
6,2
6,2
CLCFold
Evo 450
CLCFold
Evo
15 450
CLCFold
Evo
- 450
15
CLC 4,50
Evo
15
- 450
CLC Evo 500
CLC Evo
17 500
CLC Evo
13 500
17
CLC 5,00
Evo
17
13 500
15
17
2,85
13
4,50
5,00
13
11
4,00
13
4,50
5,00
11
4,00
2,85
4,50
5,00
Central 200x2002,85
- External 100x100
4,00
Cat2,85
III
& IV
Central 200x200
- External
100x100
Central 200x200
- External
100x100
Cat III
& IV
290
290
Central
200x200
- External
100x100
Cat 290
III
& IV
120/320
135/350
105/300
290
290
Cat
III & IV
290
370
360
120/320
135/350
290
290
105/300
290
3110
3440
290
290
3015
370
120/320
135/350
290
360
105/300
3240
120/320
135/350
2900
3110
3440
370
105/300
3015
360
370
7,4
8,0
8,9
3240
3110
3440
360
2900
3015
3110
3440
3240
3015
7,4
8,0
8,9
2900
3240
2900
7,4
8,0
8,9
7,4
8,0
8,9
CLC Evo: Main advantages
• High Horse power capacity to cope with all conditions and tractor
sizes from 90 to 350 hp
• Universal Cultivator from 3.0 to 5 m, working 5 to 30cm deep
• Unique leg design protecting the structure and no maintenance
• Unique leg design vibrating for intensive effect in the soil but low fuel
consumption
• Knock-on system for fast and easy metal change
• Combi-disc for working shallow and to combine the deep working of
the tines
• Intensive mixing of the residues
• Compact machine for tractors with low lifting capacity
• Low power requirement
• Seedbed finish possible
Kverneland CLC Evo:
Compactly efficient!
CLC Evo – 450F/new Combidisc /Actipack
CLC Evo – 450F/Double disc gang