Transcript FenceSecure - Harper Chalice

HARPER CHALICE GROUP LIMITED
8 Binns Close
Coventry CV4 9TB
United Kingdom
Telephone 02476 421300 Fax 02476 421 309
Email: sales@ harperchalice.co.uk
www.harperchalice.co.uk
HARPER CHALICE GROUP LIMITED
We are the UK’s leading manufacturer and supplier of specialist
Electrified and Electronic Perimeter Intrusion Detection Systems.
Our Brand names include: -
PulseSecure™
FenceSecure™
WallSecure™
We supply our products and systems worldwide with total manufacturers support
at every stage from system surveys, design, installation training and commissioning.
Perimeter Defence
Perimeter Defence
FenceSecure™
&
WallSecure™
Perimeter Intrusion Detection Systems
Product overview presentation
FenceSecure™
&
WallSecure™
Perimeter Intrusion Detection Systems
FenceSecure™
Fence Intrusion Detection System

Suitable for use on most types of perimeter fences

Can be used in conjunction with fence or wall topping

Provides complete perimeter fence detection
FenceSecure™
Fence Intrusion Detection System
•
•
Vibewire™ Piezoelectric sensor cable system
Single or Dual zone
•
Modular design
•
IP67 housing
•
Separate sensitivity settings for fence cut and climb
•
Alarm relay outputs
•
Optional monitoring & multiplex control systems
•
Up to 300 m zone lengths
•
Remote test and listen in facility
How FenceSecure™ works
Vibewire piezoelectric sensor cable is acoustically coupled to the fence or fabric
to be monitored against intrusion attempts.
The Vibewire sensor cable picks up noises and vibrations that occur when a Would-be intruder attempts
to cut ,climb, jack up or penetrate the protected barrier. The Vibewire and SA100 analysers are designed
and installed to create detection zones for alarm monitoring and response.
Each zone of Vibewire is connected to the SA100 analyser which analyses the signals received from the
monitored fabric and discriminates between normal ambient noise and attack signals
SA100 analyser features: 15 sensitivity settings for detection
15 sensitivity settings for cut detection
Operates from 12 or 24V DC
Low current draw (less than 50mA per dual zones).
Independent alarm relays for each zone and tamper
Complete monitoring of the sensor cable.
The analyser sensitivity is set up to match the fabric being protected for optimum detection and security.
Vibewire can be used with zone lengths of up to 300m which is normally optimised at 100m for use
with CCTV systems and alarm verification purposes
There is an optional remote listen in facility for set up and alarm verification
FenceSecure™
Fence Intrusion Detection System
How FenceSecure™ works:
FenceSecure™
Vibewire sensor cable mounted on Chain link fence
Vibewire™ sensor cable is applied to the fence or fabric to be protected.
If an intruder attempts to cut climb or jack the protected fence to gain un authorised entry, the
signals as detected by FenceSecure™ SA100 seismic analyser and a zone alarm is generated
FenceSecure™
Fence Intrusion Detection System
How FenceSecure™ works:
The SA100 analyser detects various forms of attack
The signal processing discriminates between normal background
noises and disturbances and the vibrations and signals that occur
during various methods of attack
Quiescent background noise
Screen shot
FenceSecure™
Fence Intrusion Detection System
How FenceSecure™ works:
The SA100 analyser detects various forms of attack
Bolt cropper attack
Screen shot
FenceSecure™
Fence Intrusion Detection System
How FenceSecure™ works:
The SA100 analyser detects various forms of attack
Climb detection
Screen shot
FenceSecure™
Fence Intrusion Detection System
How FenceSecure™ works:
The SA100 analyser detects various forms of attack
Disc cutter
Screen shot
FenceSecure™
Fence Intrusion Detection System
How FenceSecure™ works:
The SA100 analyser detects various forms of attack
Hack saw
Screen shot
FenceSecure™
Fence Intrusion Detection System
How FenceSecure™ works:
The SA100 analyser detects various forms of attack
Gross attack
Screen shot
FenceSecure™
Fence Intrusion Detection System
Vibewire

• Uniform
Piezoelectric sensor cable
detection characteristics
• High signal to noise ratio
• Unobtrusive
• Easy to install
• Tough UV stabilised outer sheathing
• Proven performance
• Vibewire versions supplied in stainless steel sheath for “High Security”
Or difficult installations where extra physical protection is required
FenceSecure™
Fence Intrusion Detection System
Vibewire™
Piezoelectric sensor cable system
Model:
VW200
Features/application:
Standard sensor cable for use on chain link and welded
mesh fences
VW205
Premium sensor cable for use on Palisade, 358 weld
mesh and “High Security” Fences
VW210
Super sensor cable for use on special applications where
maximum sensitivity and signal to noise is required
Note: VW200/SS – VW205SS – VW210SS are as above but supplied in a flexible stainless steel sheath.
FenceSecure™ + WallSecure™
SA100 Seismic Fabric Mounted Detection Systems
A Complete range of installation components and accessories - It all fits together!
FenceSecure™
Perimeter Intrusion Detection System
Perimeter intrusion detection systems are zoned for interfacing with CCTV for alarm verification and response
Zone 1
Perimeter Intrusion Detection
Zone 2
Alarmed premises
Zone 3
Zone 4
FenceSecure™
Fence Intrusion Detection System
FenceSecure™
Fence Intrusion Detection System
FenceSecure
™
Fence Intrusion Detection System Vibewire mounted within flexible stainless steel
conduit and secured with stainless steel ties to weld mesh fence
FenceSecure™
Fence Intrusion Detection System
FenceSecure™
Fence Intrusion Detection System Vibewire mounted within screw barrel conduit
FenceSecure™
“High Security Fence Detection System”
“High Security fence”
FenceSecure™
Fence Intrusion Detection System
FenceSecure™
Fence Intrusion Detection System gate loops.
FenceSecure + PulseSecure
The winning combination…………..
WallSecure
™
Wall and Roof Intrusion Detection System
WallSecure
™
Wall and Roof Intrusion Detection System
WallSecure
™
Wall and Roof Intrusion detection System for
Bonded warehouse and secure storage
WallSecure
™
Wall and Roof Intrusion Detection System
WallSecure™
Analyser
Vibewire sensor cable mounted in conduit tube
WallSecure
™
Wall and Roof Intrusion Detection System
End of line
monitor
Vibewire sensor cable mounted in conduit tube
WallSecure
™
Wall and Roof Intrusion Detection System
WallSecure across boarded up doors and windows
Your first line of Defence