Form 5

™

Malleable Iron Conduit Outlet Bodies Crouse-Hinds Training Module

Form 5

™

Malleable Iron Conduit Outlet Bodies Outline

 Applications  Features  Certifications and Compliances  Body Configuration  Covers  Creating a catalog number  Marketing Materials

Form 5

™

Malleable Iron Conduit Outlet Bodies Applications

Form 5 Conduit Outlet Bodies are used in conduit systems to: • Act as pull boxes for conductors being installed • Provide openings for making splices and taps in conductors • Act as mounting outlets for lighting fixtures and wiring devices

Form 5

™

Malleable Iron Conduit Outlet Bodies Applications (continued)

• Connect conduit sections • Provide taps for branch conduit runs • Make 90°bends in conduit runs • Provide access to conductors for maintenance and future system changes

Form 5

™

Malleable Iron Conduit Outlet Bodies Features

Built-in rollers on 1 1/4” to 4” Type C and LB bodies to facilitate wire pulling Malleable iron construction provides high impact resistance and ductility Available in SnapPack Pre-packaged body, cover and neoprene gasket Available threaded for rigid / IMC conduit

Form 5

™

Malleable Iron Conduit Outlet Bodies Features

Interchangeable with Appleton ® Form 35 ® and O-Z/Gedney ® malleable iron conduit outlet bodies Smooth and rounded integral bushings for protection of wire insulation Appleton and Form 35 are registered trademarks of EGS/Appleton Electric.

O-Z/Gedney is a registered trademark of EGS/O-Z/Gedney.

Form 5

™

Malleable Iron Conduit Outlet Bodies Certifications and Compliances

• UL Standard 514B • CSA Standard C22.2 No. 18

Form 5

™

Malleable Iron Conduit Outlet Bodies Available in seven body types:

C LB LL LR

T TB X

Form 5

™

Malleable Iron Covers Sheet Steel Covers

• Domed for additional cubic capacity • Stainless steel self retaining cover screws

Neoprene Gaskets

• Perforated center that can be easily removed

Form 5

™

Malleable Iron Covers Form 5 Cast Covers

•Available in ½” – 4” •½” through 2” covers are a flat design • 2½” through 4” are domed design.

•Captive, stainless steel screws for attachment of cover to body. •Certified to UL and cUL standards .

Form 5

™

Malleable Iron Covers Integral Gasketed Covers

•The Sheet Steel cover features a raised dome supplied with stainless steel screws supplied with nylon washers and gasket •Simplifies installation, reduces inventory and labor cost •UL and cUL listed and are NEMA 4 rated •Available in ½” – 4”

Form 5

™

Malleable Iron Conduit Outlet Bodies Creating a catalog number LB

Body Type C LB LR LL T TB X

75

50 = 1/2” 75 = 3/4” 100 = 1” 125 = 1-1/4” 150 = 1-1/2” 200 = 2” 250 = 2-1/2” 300 = 3” 350 = 3-1/2” 400 = 4” SnapPack is available for the following configurations: LB, LR, LL, C & T ½” – 2” Simply add CG suffix to the part #

M

Malleable iron

Form 5

™

Malleable Iron Conduit Outlet Bodies Marketing Materials

 New Form 5 ™ Brochure  Competitive Cross Reference  www.crouse-hinds.com

 Samples