Transcript No Slide Title

Problem 9.32 What value of  will cause the forced response vo in the
Figure to be zero?
v o  0 if
1
L 
C


  
1
LC
1
(5  103 )(20  103 )

100 rad/s
EENG224
‹#›
Problem 9.46 If is = 5 cos (10t + 40) A in the circuit in the Figure, find io.
EENG224
‹#›
Problem 9.55 Find Z in the network, given that Vo = 40 V
EENG224
‹#›
Problem 9.66
For the circuit in the Figure, calculate ZT and Vab.
EENG224
‹#›
(a)Calculate the phase shift of the circuit.
Problem (b)State whether the phase shift is leading or lagging.
9.79 (c)Determine the magnitude of the output when the input
is 120 V.
EENG224
‹#›
Problem 9.79
EENG224
‹#›
Problem
9.84 The ac bridge shown is known as a Maxwell bridge and is used for
accurate measurement of inductance and resistance of a coil in terms of a
standard capacitance Cs. Show that when the bridge is balanced,
Lx = R2 R3 Cs and R  R R
2
x
R1
3
Find Lx and Rx for R1 = 40 k, R2 = 1.6 k, R3 = 4 k, and Cs = 0.45 F
EENG224
‹#›
Problem 9.84
EENG224
‹#›
Problem 9.90
An industrial coil is modeled as a series combination of an
inductance L and resistance R, as shown in Fig. 9.90.
Since an ac voltmeter measures only the magnitude of a sinusoid,
the following measurements are taken at 60 Hz when
the circuit operates in the steady state:
Vs  145V,
V1  50V,
Vo  110V
Use these measurements to determine the values of L and R.
EENG224
‹#›
Problem 9.90
EENG224
‹#›