Transcript Xilinx Guidelines for Presentation Template

EDK Introduction
This material exempt per Department of Commerce license exception TSU
Objectives
After completing this module, you will be able to:
•
•
•
•
•
Describe the embedded systems development flow
Understand the components in the hardware design
Specify ways to create a hardware design
Identify the tools included in EDK
Locate the EDK documentation
EDK Intro 2
Outline
• Introduction
• EDK
– Overview of EDK
– Embedded Development Design
Flow
– XPS Platform Management
• Supported Platforms
• Appendix: Project Files and
Structures
EDK Intro 3
Embedded Systems
• An embedded system is nearly any computing system (other
than a general-purpose computer) with the following
characteristics
– Single-functioned
• Typically, is designed to perform predefined function
– Tightly constrained
•
•
•
•
Tuned for low cost
Single-to-fewer components based
Performs functions fast enough
Consumes minimum power
– Reactive and real-time
• Must continually monitor the desired environment and react to changes
– Hardware and software co-existence
EDK Intro 4
Embedded Systems
• Examples:
– Mobile phone systems
• Customer handsets and base stations
– Communication devices
• Wired and wireless routers and switches
– Automotive applications
• Braking systems, traction control, airbag release systems, and cruisecontrol applications
– Aerospace applications
• Flight-control systems, engine controllers, auto-pilots and passenger inflight entertainment systems
– Defense systems
• Radar systems, fighter aircraft flight-control systems, radio systems,
and missile guidance systems
EDK Intro 5
Current Technologies
•
•
•
•
Microcontroller-based systems
DSP processor-based systems
ASIC technology
FPGA technology
EDK Intro 6
Integration in System Design
Integration of Functions
Embedded Software Tools
CPU
CPU
Embedded Software Tools
Embedded Software Tools
FPGA
I/O
FPGA +
Memory + IP +
High Speed IO
(4K & Virtex)
Logic Design Tools
Memory
Logic Design Tools
Time
EDK Intro 7
Logic + Memory
+ IP +
Processors +
RocketIO
(Virtex-II Pro)
Logic Design Tools
Programmable Systems
usher in a new era of system
design integration
possibilities
Embedded Design in an FPGA
• Embedded design in an FPGA consists of the
following:
– FPGA hardware design
– C drivers for hardware
– Software design
• Software routines
• Interrupt service routines (optional)
• Real Time Operating System (RTOS) (optional)
PowerPC-based
Embedded Design
RocketIO
Dedicated Hard IP
DSOCM
BRAM
PowerPC
405 Core
Instruction
Arbiter
OPB
Processor Local Bus
e.g.
Memory
Controller
ZBT SRAM
EDK Intro 9
GB
E-Net
DDR SDRAM
IBM CoreConnect™
on-chip bus standard
PLB, OPB, and DCR
Bus
On-Chip Peripheral Bus
Bridge
UART
SDRAM
GPIO
Arbiter
Off-Chip
Memory
Flexible Soft IP
DCR Bus
Data
PLB
Hi-Speed
Peripheral
ISOCM
BRAM
On-Chip
Peripheral
Full system customization to meet
performance, functionality, and
cost goals
MicroBlaze Processor-Based
Embedded Design
BRAM
Local Memory
MicroBlaze
Bus
32-Bit RISC Core
I-Cache
BRAM
D-Cache
BRAM
Flexible Soft IP
Configurable
Sizes
Possible in Dedicated Hard IP
PowerPC
Virtex-II Pro
405 Core
Custom
Functions
SRAM
Bus
Processor Local Bus
Bridge
Hi-Speed
Peripheral
UART
10/100
E-Net
Data
PLB
On-Chip Peripheral Bus
Custom
Functions
CacheLink
EDK Intro 10
OPB
e.g.
Memory
Controller
Memory
Controller
Off-Chip FLASH/SRAM
Memory
GB
E-Net
Arbiter
Arbiter
Fast Simplex
Link
0,1….7
Instruction
Outline
• Introduction
• EDK
– Overview of EDK
– Embedded Development Design
Flow
– XPS Platform Management
Hardware Design
• Supported Platforms
• Appendix: Project Files and
Structures
EDK Intro 11
Embedded Development Kit
• What is Embedded Development Kit (EDK)?
– The Embedded Development Kit is the Xilinx software suite for
designing complete embedded programmable systems
– The kit includes all the tools, documentation, and IP that you require
for designing systems with embedded IBM PowerPC™ hard
processor cores, and/or Xilinx MicroBlaze™ soft processor cores
– It enables the integration of both hardware and software components
of an embedded system
EDK Intro 12
Embedded Development
Tool Flow Overview
VHDL or Verilog
C Code
Standard Embedded
SW Development Flow
Code Entry
Include
the
BSP
C/C++
Cross
Compiler
and Compile the
Software
LinkerImage
?
2
Load Software
Into FLASH
Embedded
Development Kit
HDL Entry
Board Support
Package
System Netlist
Data2MEM
Compiled ELF
3
Compiled BIT
Download Combined
Image to FPGA
Debugger
Instantiate the
Simulation/Synthesis
‘System Netlist’
and Implement
Implementation
the FPGA
1
?
Download Bitstream
Into FPGA
Chipscope
RTOS, Board Support Package
EDK Intro 13
Standard FPGA
HW Development Flow
Embedded System Tools
• GNU software development tools
– C/C++ compiler for the MicroBlaze™ and PowerPC™ processors (gcc)
– Debugger for the MicroBlaze and PowerPC processors (gdb)
• Hardware and software development tools
–
–
–
–
–
–
–
–
–
–
–
Base System Builder Wizard
Hardware netlist generation tool: PlatGen
Software Library generation tool: LibGen
Simulation model generation tool: SimGen
Create/Import Peripherals Wizard
Xilinx Microprocessor Debug (XMD)
Hardware debugging using ChipScope™ Pro Analyzer cores
Eclipse IDE-based Software Development Kit (SDK)
Application code profiling tools
Virtual Platform generator: VPGen
Flash Writer utility
EDK Intro 14
Embedded System Tools
• Board Support Packages (BSPs)
–
–
–
–
•
Standalone BSP
Wind River VxWorks
MontaVista Linux
Xilinx MicroKernel (XMK)
Xilinx Platform Studio
– Xilinx Platform Studio (XPS) is a graphical Integrated Design
Environment (IDE) that incorporates all the Embedded System
Tools for seamless creation of hardware and software
components and, optionally, a verification component
EDK Intro 15
Xilinx Platform Studio (XPS)
See notes section for detailed explanation
EDK Intro 16
XPS Functions
• Project management
• Platform management
– MHS or MSS file
– XMP file
–
–
–
–
• Software application
management
Tool flow settings
Software platform settings
Tool invocation
Debug and simulation
HW/SW
Simulation
Hardware
Design
XPS
Software
Design
HW/SW
Debug
Outline
• Introduction
• EDK
– Overview of EDK
– Embedded Development Design
Flow
– XPS Platform Management
• Supported Platforms
• Appendix: Project Files and
Structures
EDK Intro 18
Project Management
• Create a new project
– Using File  New Project or
toolbar button
• Select Base System Builder option
– The Base System Builder (BSB) wizard is a software tool that helps you
quickly build a working system targeted at a specific development board
• Select Blank XPS Project option
• Open an existing project
– Using File  Open Project or
toolbar button
• Browse to a pre-created project directory and selecting an xmp file
– Using File  New Project or
toolbar button
• Select Open a Recent Project option and selecting a project
• Project information is saved in the Xilinx Microprocessor
Project (XMP) file
Project Creation
Using Base System Builder (BSB) Option
•
•
•
•
•
•
•
Select a target board
Select a processor
Configure the processor
Select and configure I/O interfaces
Add internal peripherals
Generate the system software
and the linker script
Generate the design
– Generated files:
•
•
•
•
system.mhs
System.xmp
etc/fast_runtime.opt
pcore directory (empty)
system.mss
data/system.ucf
etc/download.cmd
system.bsb (optional, if selected)
– TestApp_Memory/src directory containing (optional, if selected)
• TestApp_Memory.c
TestApp_Memory_LinkScr.ld
– TestApp_Peripheral/src directory containing (optional, if selected)
• TestApp_Peripheral
EDK Intro 20
TestApp_Peripheral/src/TestApp_Periperal_LinkScr.ld
EDK Tool Flow
Library Generation
MSS
MHS
Hardware
Platform Generation
CompEDKLib
CompXLib
IP Models
ISE Models
Testbench
Stimulus
IP Library or User Repository
EDK SW
Libraries
LibGen
.a
Drivers,
MDD
SimGen
MPD, PAO
PCore
HDL
System and
Wrapper VHD
Synthesis (XST)
Embedded Software
Development
Application
Source
.c, .h, .s
PlatGen
system.BMM
Behavioral
VHD Model
ISE
Tools
NGC
UCF
NGDBuild
SimGen
NGD
Compiler (GCC)
MAP
Structural
VHD Model
.o
NCD, PCF
Linker (GCC)
PAR
NCD
ELF
system.BIT
BitGen
BitInit
system_BD.BMM
SimGen
Timing
VHD Model
download.BIT
download.CMD
EDK Intro 21
iMPACT
Simulation
Simulation
Generator
Hardware Implementation
XPS/Xflow
• Xflow – Implement hardware and generate the bitstream
– Input files → .ngc netlists, .bmm file, system.vhd, .ucf
– Output Files → system.bit, system_bd.bmm
– Xflow calls the ISE™ Implementation tools using
fast_runtime.opt file
• NGDBuild, MAP, PAR, and TRACE are executed
– Xflow then calls the BitGen program using bitgen.ut file
• BitGen generates the bit file system.bit
• BitGen also generates the back-annotated system_bd.bmm BMM file,
which contains the physical location of the block RAMs
EDK Intro 22
Hardware Implementation
ISE/XPS Flow
• The ISE/XPS flow provides integration of a processor system at two levels as a
component in a FPGA design :
– The processor system is the top-level design
– The processor system is a submodule
• Once the processor system is added in the ISE project, XPS can be invoked from ISE
by selecting xmp file in Sources window and double-clicking Manage Processor
System in the Processes window
• Add user constraint file in ISE
• Implement design in ISE by selecting top-level module in Sources window and
double-clicking Implement Design in Processes window
• Executable software can be merged by selecting top-level module in Sources window
and double-clicking Update Bitstream with Processor Data in Processes window
– This will call XPS in background to update the bitstream and generate system.bit and download.bit
files in implementation directory as well as copy the file as system_stub.bit and
system_stub_download.bit files in the ISE project directory
EDK Intro 23
Software Flow Library Generation
• Library Generator – LibGen
– Input files → MSS
– Output files → libc.a, libXil.a, libm.a
– LibGen is generally the first tool run to configure libraries and
device drivers
• The MSS file defines the drivers associated with peripherals, standard
input/output devices, interrupt handler routines, and other related
software features
– LibGen configures libraries and drivers with this information
and produces an archive of object files:
• libc.a - Standard C library
• libXil.a - Xilinx library
• libm.a - Math functions library
EDK Intro 24
Software Flow
Compilation
• Compile program sources
– Input files → *.c, *.c++, *.h, libc.a, libXil.a, libm.a
– Output files → executable.elf
– This invokes the compiler for each software application and
builds the executable files for each processor
– Four stages:
• Pre-processor: Replaces all macros with definitions as defined in the .c or
.h files
• Machine-specific and language-specific compiler: Compiles C/C++ code
• Assembler: Converts code to machine language and generates the object
file
• Linker: Links all the object files using user-defined or default linker script
EDK Intro 25
Merging Hardware and
Software Flows
Hardware
Flow
Software
Flow
data2MEM
download.bit
GPIO
MicroBlaze™/
PPC
Arbiter
UART
EDK Intro 26
Merging Hardware and
Software Flows
• Data2MEM – Update the bitstream
– Input files → system_bd.bmm, system.bit, executable.elf
– Output file → download.bit
– This invokes the BitInit tool, which initializes the instruction
memory of the processor
– The instruction memory may be initialized with a bootloop,
bootloader, or an actual application
– This is the stage where the hardware and the software flows
come together. This stage also calls the hardware and
software flow tools if required
EDK Intro 27
Configuring the FPGA
• Download the bitstream
– Input file → download.bit
– This downloads the download.bit file onto the target board
using the Xilinx iMPACT tool in batch mode
– XPS uses the etc/download.cmd file for downloading the
bitstream
• The download.cmd file contains information such as the type of cable is
used and the position of the FPGA in a JTAG chain
EDK Intro 28
Outline
• Introduction
• EDK
– Overview of EDK
– Embedded Development Design Flow
– XPS Platform Management
• Supported Platforms
• Appendix: Project Files and
Structures
EDK Intro 29
Add/Edit Cores
• Add cores, edit core parameters, and make bus and port
connections through System Assembly view
1– Select IP Catalog tab to add peripherals
3
• Select a core and drop it in
the system view or doubleclick on it to add
2– In the System View select an
instance, right click, and then
select Delete Instance
3– Change settings using
appropriate filters and
select an instance
• Base and end addresses
• Parameters
• Ports
1
2
Project Options
Device and Repository Tab
• Set/Change Target Device
–
–
–
–
Architecture
Device Size
Package
Grade
• Peripheral Repository
Directory
– Provide path to custom IP
not present in the current
project directory structure
• Custom Makefile Directory
Note: Detailed information on the other two tabs is provided in the “Adding
Your Own IP to the OPB Bus” and the “System Simulation” modules in this course.
Outline
• Introduction
• EDK
– Project Management
– Software Application Management
– Platform Management
• Supported Platforms
• Appendix: Project Files and
Structures
EDK Intro 32
Supported Platforms
• Operating systems
–
–
–
–
Windows 2000 (Service Pack 2)
Windows XP
Solaris Operating System 2.8/2.9
Linux Red Hat Enterprise 3.0
• FPGA families
–
–
–
–
–
–
Spartan™-II/IIE (MicroBlaze™ processor)
Spartan-3/3E (MicroBlaze processor)
Virtex™ and Virtex-E (MicroBlaze processor)
Virtex-II (MicroBlaze processor)
Virtex-II Pro (MicroBlaze and PowerPC™ processors)
Virtex-4 FX (MicroBlaze and PowerPC processors) and LX/SX (MicroBlaze
processor)
EDK Intro 33
BSB-Supported Platforms
• A list of supported Xilinx hardware boards:
–
–
–
–
–
–
–
–
–
–
AFX board
Spartan-3 Starter Board
Virtex-4 ML401 Evaluation Platform
Virtex-4 ML402 Evaluation Platform
Virtex-4 ML403 Evaluation Platform
Virtex-II Multimedia FF896 Development Board
Virtex-II Pro ML300 Evaluation Platform
Virtex-II Pro ML310 Evaluation Platform
XUP Virtex-2 Pro Educational Platform (.xbd files downloadable from XUP web)
Custom board
• Board definition (.xbd) files for third party boards can be
downloaded from the board vendor web site
– Links from the BSB wizard and Xilinx embedded Web page
EDK Intro 34
Knowledge Check
• What is the MHS file?
• What does the PlatGen tool do?
• What tool is used to place executable code in an
FPGA block RAM?
EDK Intro 35
Answers
• What is the MHS file?
– The MHS file is the Microprocessor Hardware Specification; it
specifies processors, hardware peripherals, bus connections, and
address spaces for the hardware
• What does the PlatGen tool do?
– PlatGen takes the MHS file and creates the system and peripheral
netlists, HDL wrapper files, BMM file, etc.
• What tool is used to place executable code in an FPGA
block RAM?
– The Data2Mem tool will take the BMM file and create the proper
initialization for the block RAM that is assigned to the executable
memory space
EDK Intro 36
Knowledge Check
• How can you add or change configuration
settings once the hardware system is build?
• What does the LibGen tool do?
• What is the difference between system.bit and
download.bit files?
EDK Intro 37
Answers
• How can you add or change configuration settings once the
hardware system is build?
– Select IP Catalog tab, expand related IP peripheral folder, select a desired
IP, and double-click on it to add it to the design
– Select an IP instance in the System Assembly View panel, right click on it,
and select desired configuration
• What does the LibGen tool do?
– Read MSS file and generate libraries
• What is the difference between system.bit and download.bit files?
– The system.bit file contains only hardware description whereas
download.bit file contains both hardware description as well as executable
software
EDK Intro 38