Transcript B13
Do Now for 10/25/13
Take out B12 and get it ready to check.
HW: None
B13 Product Life Cycle
Today’s Target: I will be able to state the various
stages of the product life cycle.
Check B12
Introduce B13
Gather data
B12 Check
Write up – 5 points
Title and Challenge
Your choice for a new drink container – 5 points
Data table – 5 points
Information in the data table – 15 points
All the information from the cards are listed on the
table.
Analysis 1 through 4 – 8 points (2 points each)
Key Points – 5 points ( 1 point each)
Vocabulary – 3 points ( 1 point each)
Total = 46 points
B13 Product Life Cycle
B12 Vocabulary
Evidence – previously defined
Properties - previously defined
Trade-offs - previously defined
Materials - Physical substances used to make things.
Materials Engineer - Someone who uses the
characteristics of existing materials to design new
products.
Materials Scientist - Someone who studies the
characteristics and uses of various materials, such as
metals, ceramics, and plastics.
B13 Product Life Cycle
If each container could talk about its life, what would it
say?
Materials Engineers use the term “life” to describe the
stages a product goes through from its origins as raw
materials until it’s been disposed of.
Read the Background and Challenge on page B-7
Write up the activity in your lab notebook.
Title
Challenge
Safety
Procedure – Follow the steps and record information as
needed.
Do Now for 10/28/13
Take out B13 materials.
HW: Complete Analysis 1 through 5
B13 Product Life Cycle
Today’s Target: I will be able to state the various
stages of the life cycle diagram.
End of life/disposal of plastic
Complete steps 2 through 5
Analysis 1 through 5
B13 Product Life Cycle
Complete Procedure step 1 together.
Life cycle diagram
What do you see in these diagrams?
How are glass bottles made?
How is glass recycled?
B13 Product Life Cycle
Complete steps 2 through 4
Read about your assigned product (either aluminum or
plastic)
As you read, fill out sheet 13.1 Stages in the Life Cycle of a
Product. Express your answers in your OWN words.
Complete step 5 – Life cycle diagram
Take the information you gathered about the life cycle of
your product, and use it to create a life cycle diagram.
Make sure you include the arrows showing how different
stages are connected.
Show the inputs and outputs at each stage.
Detailed inputs and outputs need to be listed.
Draw the diagram in your lab book.
B13 Product Life Cycle
Analysis
Use your diagram to answer analysis 1 through 5.
Complete lab report for B13
Title
Challenge
Safety
Completed Data Table (Student sheet 13.1)
Copy of Life Cycle Diagram in your lab book
Analysis 1 through 5
Exit Ticket
Which stage of the product life cycle is the most
important and why do you think that?
B13 Product Life Cycle
Design a life cycle diagram
Answer analysis questions
Do Now for 10/29/13
Take out B13
HW: None
Today’s Target: : I will be able to state the various
stages of the life cycle diagram.
What else can happen to plastic
Check HW and go over analysis
Key Points and Vocabulary
Lab Check for B13
1. For the drink container you were assigned:
a.What are its raw materials?
b. Does the product have more than one end-of-life
option? Explain.
Plastic
Raw Materials: petroleum, natural gas
End-of-life options: landfill, recycle some
Aluminum
Raw materials: bauxite, sodium phosphate solution
End-of-life options: recycle, landfill
2. Use your life-cycle diagram to explain what would
happen to all of the other stages in the life cycle of the
drink container if:
a. the demand for the drink container increases.
Need for more raw materials, more energy needed to
gather raw materials
More energy needed to manufacture the material and
the containers
More waste produced during manufacturing
More used containers sitting in landfills
b. the raw materials used to make the product run out.
No materials to make the product
No waste produced from manufacturing
Companies need to find other materials to make the
containers
Need to rely on recycled materials only
No more containers added to the landfills
c. materials engineers design a way to manufacture the
container with less waste produced.
Less raw materials needed from the earth
Less waste produced
3. Explain why or why not a life-cycle diagram would be
a useful tool for:
a. the director of a drink company who wants to choose a
container for a new drink.
b. a materials scientist working to reduce the negative
impact a drink container has on the environment.
c. a person buying a bottle of sports drink in a store.
in each case the life-cycle diagram would help the
person to see the steps that go into the entire life of
the product. Which in turn helps when making an
informed decision.
4. Look at the life cycle of a product shown on Student Sheet
13.1,“Stages in the Life Cycle of a Product.” Using the “Green
Chemistry Guidelines” on Student Sheet 13.2, make a list of
ways to reduce the negative environmental impact of this
product.
Reducing the amount of raw materials needed at each
stage.
Reducing the amount of materials needed as inputs in the
manufacturing stage.
Reducing the amount of waste produced at each stage.
Increasing the amount of materials that are recycled to
decrease the volume of raw materials needed at the
manufacturing stage.
Accept any suggestion that would reduce energy and
resources as inputs and reduce the amounts of waste as
outputs.
B13 Product Life Cycle
Key Points
A material has characteristic properties.
Technological solutions have intended benefits and
unintended consequences. Some consequences can
be predicted, and others cannot.
Diagrams and models can demonstrate scientific
concepts.
B13 Product Life Cycle
Vocabulary
life cycle - The progression through a number of steps or
different stages in the manufacture, use, and disposal of a
product. For example, obtaining and refining a copper ore,
making a penny, using a penny, and the eventual corroding of
the penny. In animals and plants, life cycle refers to the
developmental stages they pass through from birth to death.
Raw materials - The first stage of four stages in a product’s
life cycle. Raw materials need to be extracted from the earth
in order to manufacture a product.
Manufacturing - The second stage of four stages in a
product’s life cycle. It is when the product is created from
raw materials.
Useful life - The third stage of four stages in a product’s life
cycle. This is the time that a manufactured product may be
used productively.
End of life - The fourth and final stage in a product’s life
cycle, when a product is no longer useful.
B13 lab Check –Trade with someone
who does not have the same material
as you.
Write up – 5 points
Title, Challenge
Completed Data Table (Student sheet 13.1) – 5 points
Copy of Life Cycle Diagram in your lab book - 15 points
Does the diagram list all the stages? 5 points
Does the diagram show detailed inputs and outputs at each stage? 5 points
Do you understand the life cycle of this product after reading this life
cycle diagram? 5 points
Analysis 1 through 5 – 10 points
Key Points – 3 Points
Vocabulary – 5 points
Total = 43 points
Exit Ticket
Which stage of the product life cycle is the most
important and why do you think that?