Transcript HOW TO FLASH OGO O77

HOW TO FLASH OGO O77
• Download the software from the link given below
http://sendshack.com/download/bbzywdr
• Please connect the OGO-077 data cable with PC, not with Handset.
• Open the “Flash Tool 3.0916.1” Folder and Double click on
“Flash_tool.exe”.
• Then we can see the below picture on the screen.
•Go to the “Options” in main bar of above picture .once select the “options” there are
•
please select baud rate -921600
Please select the USB Download/Readback option
Operation method= Please select “NFB”
Baseband chip option = Please uncheck the both option.
Format FAT= Please select ”Do Not Format FAT”.
•Then go to “Down load Agent” option ,once select the Down load
Agent it will
Ask “MTK_AllInOne_DA.bin” please double click on this file.
•Then go to “Scatter-loading” option, it will ask for *.txt file of the
SW please select the “.txt”
•Once select the scatter file NFB-BootLoader,NFBExtBootLoader,ROM,SECONDARY_ROM,DEMAND_PAGIN will
appear on the screen page.
•Please press the download key.
•Immediately insert the battery and long press the upper volume
key.
•If the flashing starts then you see as the picture given .
After completion of the flashing we will see the below picture
•After completion of the download please remove
the mobile from data cable.
•Afterwards remove and insert the battery of the
mobile then switch on the mobile phone.
•After that the mobile is ready to use.
HOW TO FLASH OGO O-78
•Download the software from the link given below
http://sendshack.com/download/px2i5kj
•In this all the process is same till completion of the
flashing.
•After that press the menu button and go to the
SETTING option.
•Then select the RESTORE FACTORY option.
•The password is 1122.
• After the restore the phone will restart and is
ready to use.