C-MAP MAX-N+ 2015

Transcript C-MAP MAX-N+ 2015

HDS GEN2 (Keypad)

Version 4.0 Software Update 4.0-45.2.200

2 •

Features

This Software update will give the following features: – Support for the new Lowrance Outboard Pilot • Control the autopilot from the screen of the HDS Gen2 – – Navigate routes/to a waypoint/to a cursor/vessel heading Integrated turn patterns for trolling – Support for C-MAP MAX-N+ 2015 cartography • Adds Detailed Marina Charts/Aerial Photography/High Resolution Satellite Imagery/Dynamic Raster Charts/and much more… • • For more information on C-MAP MAX-N+ 2015 2015 http://c-map.jeppesen.com/us/marine-navigation/chart-plotters/c-map-max-n © Navico Company Confidential

Lowrance Outboard Autopilot

Lowrance Outboard Pilot

Outboard Pilot is an HDS Autopilot add-on system designed for boats up to 30ft with single outboard motor.

System packs contain everything you need to fit an Autopilot to Hydraulic or Cable steer outboard motors.

Walleye/Multi species 4 Runabout © Navico Company Confidential Trailer boat

Outboard Pilot - Product Description

This product range comprises the following: • • • • • NAC-1 Autopilot Computer POINT-1AP Heading and GPS sensor PUMP-1 Reversible Hydraulic Pump – OR HELM-1 Cable steer drive unit SmartSteer TM User Interface for HDS GEN2 For more details Visit: http://www.lowrance.com/en-US/Products/Auto-Steering/

•

SmartSteer Interface

Outboard Pilot steering modes: – Auto: Steers the boat automatically to a set heading • Adjust Port/Starboard in 1 or 10 degree increments 6 © Navico Company Confidential

•

SmartSteer Interface

Outboard Pilot steering modes: – Turn patterns: pre-set trolling patterns • Sub-menu of the Auto mode 7 © Navico Company Confidential

•

SmartSteer Interface

Outboard Pilot steering modes: – Course: Steers the boat automatically along a calculated track using heading and GPS position • Adjust Port/Starboard in 1 or 10 degree increments 8 © Navico Company Confidential

•

SmartSteer Interface

Outboard Pilot steering modes: – Nav: Steers the boat automatically along pre defined route, to a waypoint or to cursor location • Cancel navigation, restart the route, skip a point 9 © Navico Company Confidential

•

SmartSteer Interface

Outboard Pilot steering modes: – Power steer: Manual control of the direction of the outboard motor. Virtual steering wheel • Control the motor angle port/starboard 10 © Navico Company Confidential

Charting Feature Enhancements C-MAP MAX-N+ 2015

•

C-MAP MAX-N+ 2015

Software version 4.0 will give HDS Gen2 the following features when using Jeppesen CMAP-MAX-N+ 2015: – User selectable chart view • No Contours: Shaded Relief and POIs • • • 2D: No Shaded Relief, but full contours and POIs Raster: Traditional paper chart look Shaded Relief: Full Shaded Relief, 2D contours and POIs * All features shown in this brief are pending available data on the individual mapping cards 12 © Navico Company Confidential

C-MAP MAX-N+ 2015

No Contours 2D 13 Raster © Navico Company Confidential Shaded Relief

–

C-MAP MAX-N+ 2015

Photo Overlay (Shaded Relief, No Contours or Raster) • Adjust transparency between the photo overlay and the underlying map 14 Photo Overlay: Full © Navico Company Confidential Photo Overlay: Land Only

–

C-MAP MAX-N+ 2015

Aerial Photos • These photos provide a “bird’s eye” view of marinas, harbors, channel entrances and other features 15 Aerial Photo Symbol on Chart Highlight the Photo Icon with the cursor.

–

C-MAP MAX-N+ 2015

High Resolution Bathymetry (2D and Shaded Relief mode) • User selection enable/disable the high resolution contour lines on the chart 16 High Resolution Bathymetry: Off © Navico Company Confidential High Resolution Bathymetry : On

–

C-MAP MAX-N+ 2015

User selectable depth palette displays (2D mode only) • Users can pick how the C-MAP MAX-N+ 2015 chart is displayed – Default = Standard C-MAP color presentation – Paper Chart = Designed to look like traditional marine charts – Safety Shading = Allows the user to input a safety depth to shade the chart blue in that area. The rest will display as white.

– Depth Shading = Preset color palette displaying a gradient from shallow (lighter color) to deep (darker color) 17 © Navico Company Confidential

C-MAP MAX-N+ 2015

19 –

C-MAP MAX-N+ 2015

User defined Depth Shading (2D mode only) • Advanced setting to allow users to customize their own charting colors – Set depths ranges to display as certain colors, or gradients of colors » Set the depth for the color layer » Set the transparency of the color layer • Example: If you want to set shallow water to show red you will set the custom range as shown below (see next page for example) – For this method it is required to set one point at the same depth 100% opacity and one point at 0% opacity – Users can adjust these points to make different color blends – More points can be added and by adjusting the depth, color and opacity • Note: There are endless combinations that can be customized with these settings, far too extensive to cover in full detail here. © Navico Company Confidential

C-MAP MAX-N+ 2015

–

C-MAP MAX-N+ 2015

User defined Depth Shading (2D mode only) • Example 2: In this example we have set a red range up to 10ft. and a dark blue range at 30ft and greater 21 © Navico Company Confidential