Transcript otn_presentation
The Optical Transport Network (OTN) – G.709
● Introduction ● ● Why OTN?
Advantages ● ● Interfaces Properties ○ Architecture and Overhead ○ TCM ○ FEC ● ● Testing The future of OTN
Introduction
● OTN = The Optical Transport Network ○ specified in ITU-T G.709 standard ● ITU-T definition: “a set of Optical Network Elements connected by optical fiber links, able to provide functionality of transport, multiplexing, switching, management, supervision and survivability of optical channels carrying client signals.” ● aim is to enable the multiservice transport of packet based data and legacy traffic (Next generation SONET/SDH)
Why OTN?
● Operators’ need to use existing fiber to satisfy Growing demand for services and bandwidth ● DWDM increased fiber bandwidth, but lacked protection and management capabilities.
● OTN Combines the benefits of SONET/SDH with DWDM
Advantages
● Protocol transparency ○ Integrity of the client signal is maintained.
○ End user views exactly what was transmitted.
● Backward compatibility for existing protocols.
● Better switching scalability ○ OTN is able to switch at a higher bit rates than SDH.
Advantages
● Better Forward Error Correction (FEC) ○ G.709 FEC algorithm result in up to 6.2 dB improvement in Signal to Noise Ratio (SNR).
○ Increased span length ○ Can increase number of channels ○ an enabler for transparent optical networks ● Tandem Connection Monitoring (TCM) ○ Unlike SDH, OTN has six TCM fields.
○ Allowing each network to be monitored.
●
OTN Interfaces
Inter-Domain Interfaces (IrDI) ● Intra-Domain Interfaces (IaDI)
OTN Architecture
OTN Layers (End-to-End View)
Optical Channel Structure
● ● Optical channel OH contains OPU + ODU + OTU + FAS.
Client signal could be of any existing protocol such as IP, ATM.
Optical Channel Payload Unit (OPU)
● provide information on the type of signal transported.
● PSI = Payload Structure Identifier ● PT = Payload Type
Optical Channel Data Unit (ODU)
● allows the user to support Tandem Connection Monitoring, Path Monitoring, Automatic Protection Switching, Fault type and Fault location.
Tandem Connection Monitoring (TCM)
Optical Transport Unit
● Specifies frame alignment and FEC (Forward Error Correction)
Forward Error Correction (FEC) ● Enables correction and detection of errors ● Uses Reed-Solomon coding, RS(255, 239) ○ byte interleaved
FEC
● detects 16 bit errors, corrects 8 bit errors.
Benefits of FEC
● Gain in power level.
● Network operator can accept a lower quality signal ● Reduction in the use of 3R regenerators ● Early warning capabilities
Optical multiplex section(OMS) ● consists of multiplexed OChs Optical transmission section (OTS) ● transports the optically multiplexed sections ● perform monitoring and maintenance between optical network elements
Testing
● To guarantee bandwidth availability and quality ● introducing alarms and errors in the system and measuring their effects on the transmission ● E.g. stimulus testing, mapping/demapping testing, FEC error testing.
Testing
● Mapping/Demapping testing ● FEC testing
The future of OTN
● management functionality to DWDM networks ● Full backward compatibility ● Full transparency ● enables operators to operate efficiently and economically.
References
“G.709 - The Optical Transport network (OTN)”, Schubert, Andreas; JDSU, Pages: 1-14 http://www.item.ntnu.no/fag/ttm1/misc/g709otn_wp_opt_tm_ae.pdf
Optical Transport Network (OTN) Tutorial, ITU-T http://www.itu.int/ITU-T/studygroups/com15/otn/OTNtutorial.pdf
OTN Overview , Radhakrishna Valiveti, System Architecture Group, Infinera Corp.
https://www.infinera.com/technology/files/infinera-IEEE-OTN-Overview.pdf