Transcript Slides

Synchronization
2IN60: Real-time Architectures
(for automotive systems)
Mike Holenderski, [email protected]
Goals for this slide set
• Describe different dependencies which may
exist between tasks
• Describe different methods for synchronizing
dependent tasks, and explain how to apply
them
• Describe the priority inversion and deadlock
problems, and how to address them
• Explain how to implement periodic tasks using
semaphores
Mike Holenderski, [email protected]
2
Outline
• Synchronization requirements
– Mutual exclusion
– Precedence constraints
• Mutexes
– Problems: priority inversion & deadlock
– Solutions: Priority Calling Protocol & Stack
Resource Policy
• Semaphores
– Example: implementing periodic tasks
Mike Holenderski, [email protected]
3
Synchronization problem
• Mutual exclusion:
– A resource can be used by at most one task or ISR
at a time
• Precedence constraints:
– Tasks or ISRs must execute in a particular order
• Problem: Co-ordinate execution of a given
concurrent program such that no erroneous
interleavings are possible
Mike Holenderski, [email protected]
4
Example: mutual exclusion
(disabling interrupts)
• Implement atomicity by
disabling interrupts
• Problem: busy waiting
inside of conversion with
non-preemptive
execution w.r.t. tasks and
ISRs
int ATDReadChannel(...) {
...
OS_ENTER_CRITICAL();
“do the conversion”;
OS_EXIT_CRITICAL();
...
}
void Task1(void) {
...
ATDReadChannel(PAD13);
...
}
void Task2(void) {
...
ATDReadChannel(PAD14);
...
}
– Higher priority tasks not
sharing resources are
penalized
– May lead to missed
interrupts
Mike Holenderski, [email protected]
5
Example: mutual exclusion
(disabling scheduler)
• Implement atomicity by
disabling scheduler
• Problem: busy waiting
inside of conversion with
non-preemptive
execution w.r.t. tasks
int ATDReadChannel(...) {
...
OSSchedLock();
“do the conversion”;
OSSchedUnlock();
...
}
void Task1(void) {
...
ATDReadChannel(PAD13);
...
}
void Task2(void) {
...
ATDReadChannel(PAD14);
...
}
– Higher priority tasks not
sharing resources are
penalized
Mike Holenderski, [email protected]
6
Mutual exclusion: spot the bug
• Implement atomicity by
checking a global flag
• Problem: if Task1 has
higher priority than Task2
and preempts Task2 after
Task2 has set avail to
false, then Task1 will
busy-wait forever,
preventing Task2 to set
avail to true
• Solution: suspend Task1
when avail is false,
allowing Task2 to set it to
true
Mike Holenderski, [email protected]
int avail = true;
int ATDReadChannel(...) {
...
while (!avail) {}
avail = false;
“do the conversion”;
avail = true;
...
}
void Task1(void) {
...
ATDReadChannel(PAD13);
...
}
void Task2(void) {
...
ATDReadChannel(PAD14);
...
}
7
Precedence constraints: spot the bug
• Task2 senses the light.
Every time that the value is
larger than some
threshold, Task1 toggles a
led
• Problem: if Task1 has a
higher priority than Task2,
Task1 will busy-wait and
Task2 will never run
• Solution: have Task1
suspend until x is true,
or swap the task priorities
Mike Holenderski, [email protected]
8
int x = false;
int light;
void Task1(void)
while (!x) {}
x = false;
if (light > Threshold) {
ToggleLed(LED_D24);
}
}
void Task2(void)
light = ATDReadChannel(PAD14);
x = true;
}
Synchronization primitives
• Primitives for synchronizing tasks and ISRs:
check for a condition and wait until the
condition is satisfied
– Examples of conditions:
• a shared resource is available
• a signal from ISR has arrived
• another task has arrived
Mike Holenderski, [email protected]
9
Synchronization primitives
• Two options for waiting: suspend or busy-wait
– Suspend: execute the check and suspension
atomically
– Busy waiting is only reasonable if
• preemption is allowed and we are waiting for a higher
priority task or ISR, or
• it involves another piece of hardware (e.g. multi-core,
sensors).
Mike Holenderski, [email protected]
10
Synchronization primitives
• Blocking due to mutual exclusion:
Disable interrupts
Disable scheduler
– Mutexes
– Semaphores
• Blocking due to precedence constraints:
– Semaphores
Mike Holenderski, [email protected]
11
Outline
• Synchronization requirements
– Mutual exclusion
– Precedence constraints
• Mutexes
– Problems: priority inversion & deadlock
– Solutions: Priority Calling Protocol & Stack
Resource Policy
• Semaphores
– Example: implementing periodic tasks
Mike Holenderski, [email protected]
12
Mutex
• Mutex guards a shared resource, allowing only
one task to access it at a time
• Tasks can acquire and release a mutex
void Task(void) {
. . .
(* acquire mutex *);
(* execute critical section *);
(* release mutex *);
. . .
}
• While a task is holding a mutex, no other task is
able to acquire it
Mike Holenderski, [email protected]
13
Dining philosophers problem
Mike Holenderski, [email protected]
14
Deadlock problem
• Deadlock can occur
when resources are
acquired in nested
fashion and there is
a cyclic dependency
Mike Holenderski, [email protected]
OS_EVENT* mutex1;
OS_EVENT* mutex2;
void Task1(void* pArg) {
...
OSMutexPend(mutex1, 0, &err);
OSMutexPend(mutex2, 0, &err);
(* a critical section *)
OSMutexPost(mutex2);
OSMutexPost(mutex1);
...
}
void Task2(void* pArg) {
...
OSMutexPend(mutex2, 0, &err);
OSMutexPend(mutex1, 0, &err);
(* a critical section *)
OSMutexPost(mutex1);
OSMutexPost(mutex2);
...
}
15
Example: deadlock
• Consider a system comprised of tasks 1 and 2
– 1 and 2 both use resources r1
and r2
– 1 first locks r1 and subsequently r2
– 2 first locks r2 and subsequently r1
Task1
Task2
• Problem: deadlock may occur
Task1
Task2
Mike Holenderski, [email protected]
16
Avoiding deadlock
• Avoid nested critical sections
– in principle, no Pend operations between Pend(m)…Post(m)
• Acquire all required resources at once (atomically)
– Let Pend({a, b, c, …}) be an indivisible operation when there is a
danger of deadlock, acquiring resources a, b, c, … atomically
• Use a fixed order of Pend() operations
– Pend(m);Pend(n); .... in one process may deadlock with
Pend(n);Pend(m);... in another process
– Solution: acquire resources in a fixed order
Mike Holenderski, [email protected]
17
Dining philosophers problem
Forks should be picked up
in the order: 1, 2, 3
1
2
3
Mike Holenderski, [email protected]
18
Avoiding deadlock
• Avoid nested critical sections
– in principle, no Pend operations between Pend(m)…Post(m)
• Acquire all required resources at once (atomically)
– Let Pend({a, b, c, …}) be an indivisible operation when there is a
danger of deadlock, acquiring resources a, b, c, … atomically
• Use a fixed order of Pend() operations
– Pend(m);Pend(n); .... in one process may deadlock with
Pend(n);Pend(m);... in another process
– Solution: acquire resources in a fixed order
• Use an appropriate Resource Access Protocol
– E.g. Stack Resource Policy (SRP)
• In general: avoid cyclic dependencies!
Mike Holenderski, [email protected]
19
Priority inversion
• A low priority job obtains a resource; a high priority job
waits on its release
• A middle priority job pre-empts the low priority job
during resource access
– the high priority job now waits on the middle priority job
... and effectively has the low priority while waiting
L(r)
U(r)
task h
task h
priority inversion
task l
L(r)
U(r)
L(r)
U(r)
Mike Holenderski, [email protected]
task m
task l
“unbounded” priority inversion
L(r)
U(r)
Priority inversion
• A pair of alternating middle priority jobs can
block the high priority job “indefinitely”
– “unbounded” priority inversion:
• example: Mars rover; see article.
• Resource access protocol:
– Guarantee mutual exclusion (e.g. mutexes)
– Resolve other problems, such as priority
inversion
– At least bound the inversion time
– Adhere to the task priorities as closely as
possible
Mike Holenderski, [email protected]
21
Resource access protocols:
Priority Calling Protocol
• Protocol
– Each mutex has a priority, which is used when
accessing the mutex:
• When the mutex is already acquired and a higher
priority task attempts to acquire the mutex, then the
priority of the task owning the mutex is raised to the
mutex priority
• Mutex priority must be higher than any of the tasks
competing for the mutex
Mike Holenderski, [email protected]
22
Resource access protocols:
Priority Calling Protocol
• Properties
– Avoids “unbounded” priority inversion
– Suffers from deadlock!
• Used in μC/OS-II for implementing mutexes
Mike Holenderski, [email protected]
23
Priority Calling Protocol
Task1
Task2
Task1
Task2
Mutex priority
Task1 priority
Task2 priority
Mike Holenderski, [email protected]
24
Priority Calling Protocol
Task1
Task2
Task1
Task2
Mutex priority
Task1 priority
Task2 priority
Mike Holenderski, [email protected]
25
Resource access protocols:
Stack Resource Policy (SRP)
• Protocol
– Assign to each mutex a ceiling, equal (or higher)
to the maximum priority of any task that can
acquire it
– Scheduler keeps track of the system ceiling, equal
to the maximum ceiling of any mutex currently
acquired by any task
– A task can only start executing if
• it has the highest priority among ready tasks, and
• its priority is higher than the current system ceiling
Mike Holenderski, [email protected]
26
Resource access protocols:
Stack Resource Policy (SRP)
• Properties
– Avoids deadlock
– Priority inversion limited to at most one critical
section of a lower priority task
– Simple implementation:
• Can reuse the ready queue (used by the scheduler) for
storing the tasks blocked on a mutex
Mike Holenderski, [email protected]
27
Stack Resource Policy
Task1
Task2
Task1
Task2
1
System
ceiling
2
⊥
Mike Holenderski, [email protected]
28
Stack Resource Policy
Task1
Task2
Task3
Task1
Task2 is not blocked
while Task3 accesses
resource
:-)
Task2
Task3
1
System
ceiling
2
3
⊥
Mike Holenderski, [email protected]
29
Mutexes in μC/OS-II
• Mutexes in μC/OS-II implement the Priority
Calling Protocol
• Mutexes cannot be used by ISRs
• Mutex is created using
OS_EVENT* m =
OSMutexCreate(prio, &err);
– Mutex is assigned a priority prio
• prio must be set to a priority higher than any task
accessing mutex m
Mike Holenderski, [email protected]
30
Mutexes in μC/OS-II
• Tasks can acquire mutex m using
OSMutexPend(m, timeout, &err);
– If the m is available it is immediately acquired
– If the m is already acquired, the task is suspended until another
task releases m
• Tasks with a higher priority than prio will not be blocked by the
lower priority tasks while they are using m
– Since prio is higher than the priority of any task using m, at
most one task can be suspended on m
– If timeout > 0 and m does not become available within that
time, an error is returned indicating that m could not be granted.
If timeout is 0, then OSMutexPend() will wait indefinitely
until m is available.
– &err is a pointer to an integer where the error code is returned
Mike Holenderski, [email protected]
31
Mutexes in μC/OS-II
• Tasks can release mutex m using
OSMutexPost(m);
– If there is any other task waiting for m, that task is
made ready and the scheduler is invoked
Mike Holenderski, [email protected]
32
Disabling the scheduler vs. mutexes
in μC/OS-II
Using mutexes
Disabling the scheduler
OS_EVENT* mutex;
void Task(void) {
...
OSSchedLock();
(* a critical section *)
OsSchedUnlock();
...
}
void Task(void) {
INT8U err;
...
OSMutexPend(mutex, 0, &err);
(* a critical section *)
OSMutexPost(mutex);
...
}
void main(void) {
...
}
void main(void) {
INT8U err;
...
mutex = OSMutexCreate(prio, &err);
...
}
Mike Holenderski, [email protected]
33
Evaluation: disabling interrupts
• Pros:
– Avoids deadlock and “unbounded” priority inversion
– Simple implementation (low memory processor
overhead)
– Simple timing analysis
• Cons:
– May lead to unnecessarily long blocking times
• In particular, for higher priority tasks that do not need the
shared resource.
– May lead to missed interrupts
Mike Holenderski, [email protected]
34
Evaluation: disabling the scheduler
• Pros:
– Simple implementation (low memory processor
overhead)
– Simple timing analysis
• Cons:
– May lead to unnecessarily long blocking times
• In particular, for higher priority tasks that do not need
the shared resource.
– If ISRs use shared resources, then atomicity is not
guaranteed
Mike Holenderski, [email protected]
35
Evaluation: mutexes
• Pros:
– Allow handling of interrupts
• Reduce processor blocking to just the administration of the
mutual exclusion primitives
– Higher priority tasks not sharing the resource guarded
by the critical section are not affected
• Cons:
– Not allowed in ISRs
– Elaborate implementation
• Need to maintain the task suspended on a mutex (μC/OS-II)
– Introduces possibility for deadlock
• Can be prevented with the right resource access protocol
Mike Holenderski, [email protected]
36
Outline
• Synchronization requirements
– Mutual exclusion
– Precedence constraints
• Mutexes
– Problems: priority inversion & deadlock
– Solutions: Priority Calling Protocol & Stack
Resource Policy
• Semaphores
– Example: implementing periodic tasks
Mike Holenderski, [email protected]
37
Semaphores
• Conceived by Edsger W. Dijkstra (TU/e, 1965)
• Semaphore s is an integer with initial value s  0
and atomic operations P(s) and V(s).
– Task executing P(s) is said to “try to acquire
semaphore s”
– P(s) stands for “prolaag”, i.e. portmanteau for
“probeer te verlagen”
– Task executing V(s) is said to “release semaphore s”
– V(s) stands for “verhoog”
Mike Holenderski, [email protected]
38
Semaphores
• The effect of these operations is defined as
follows:
– P(s): < await(s>0); s = s-1 >
– V(s): < s = s+1 >
• (here we used “< >” to denote atomicity)
• await: a statement to indicate suspension until a condition is
met
• The s>0 check and s = s-1 must be executed atomically
• A process that executes P(s) is suspended until
s>0
• A process executing V(s) possibly releases
suspended processes
Mike Holenderski, [email protected]
39
Semaphores
• General assumptions:
– atomic execution of P and V
• If several processes simultaneously invoke a P or V
operation on the same semaphore, the operations will
occur sequentially in an arbitrary order.
– arbitrary selection of process to proceed:
• If more than one process is waiting inside a P operation
on the same semaphore and the semaphore becomes
positive (because of the execution of a V), one of the
waiting processes is selected arbitrarily to complete the
P operation.
Mike Holenderski, [email protected]
40
Semaphores
• Specific assumptions for Real-Time Systems:
– specific selection of process to proceed:
• … the process with the highest priority among the
waiting processes is selected to complete the P
operation.
Mike Holenderski, [email protected]
41
Example: synchronizing tasks using
semaphores
• Mutual exclusion:
– Assume a resource guarded by semaphore s
– Each task sharing resource guarded by s contains:
P(s) /* use resource */ V(s)
– Initialization: s = 1
• Precedence (enforced limitations on order, where the
triggered task waits for a triggering task):
–
–
–
–
Assume synchronization based on s
Triggering task: V(s)
Triggered task: P(s)
Initialization: s = 0
Mike Holenderski, [email protected]
42
Semaphores in μC/OS-II
• Semaphores can be used by tasks and ISRs
– With the exception of OSSemPend()(task only)
• Semaphore is created using
OS_EVENT* s = OSSemCreate(value);
– Semaphore is not assigned a priority
– value is the initial value of s
Mike Holenderski, [email protected]
43
Semaphores in μC/OS-II
• Tasks can acquire one unit of semaphore s using
OSSemPend(s, timeout, &err);
– If the value of s > 0, the semaphore is decremented and
task continues
– If the value of s = 0, the task is suspended
– Several tasks may be blocked on the same semaphore
• They will be released according to their priority (highest first)
– If timeout > 0 and s was not granted before that, an
error is returned
– &err is a pointer to an integer where the error code is
returned
– Note: this is the P(s) operation
Mike Holenderski, [email protected]
44
Semaphores in μC/OS-II
• Tasks can release semaphore s using
OSSemPost(s);
– If there is any other task waiting for s, that task is
made ready and the scheduler is invoked
– Note: this is the V(s) operation
Mike Holenderski, [email protected]
45
Example: implementing periodic tasks
• Periodic task τi is specified by:
– priority i, phasing φi , period Ti
• Standard μC/OS-II does not support periodic
tasks
– These are added by the RELTEQ extension
Mike Holenderski, [email protected]
46
Periodic task implementation
• Two options:
– Create a new task
context upon each job
arrival
✓
– Create a task context
once, and let jobs be
the iterations of a while
loop.
Mike Holenderski, [email protected]
47
void Task(void (*f)(void)) {
...
while (true) {
OSTaskWaitPeriod();
f();
}
}
void OSTimeTick(void) {
...
if (* Task_i period expired *) {
(* signal Task_i *)
}
...
}
void main(void) {
...
OSTaskCreatePeriodic(fi, Ti,
φi, s, i);
...
}
Periodic task implementation
• Synchronize loop
iterations using
OSTimeDly()
• Suffers from large jitter
– Due to interference
between
OSTimeGet() and
OSTimeDly()
Mike Holenderski, [email protected]
48
void Task(void (*f)(void)) {
int k = 0;
...
while (true) {
now
OSTaskWaitPeriod();
= OSTimeGet();
f();
OSTimeDly(φi + k∗Ti - now);
} f();
}
k = k + 1;
void
} OSTimeTick(void) {
} ...
void
if (*
OSTimeTick(void)
Task_i period expired
{
*) {
...
(* signal Task_i *)
if (* Task_i period expired *) {
}
...
(* signal Task_i *)
} }
void
...main(void) {
} ...
void
OSTaskCreatePeriodic(f
main(void) {
i, Ti,
φ...
i, s, i);
OSTaskCreatePeriodic(fi, Ti,
...
} φi, s, i);
...
}
Periodic task implementation
OS_EVENT* Task1Sem;
void Task(void (*f)(void)) {
...
INT8U err;
while (true) {
OSTaskWaitPeriod();
OSSemPend(Task1Sem, 0, &err);
f();
}
}
void OSTimeTick(void) {
...
if (* Task_i
periodexpired
expired*)
*){{
Task1 period
(*
signal Task_i *)
OSSemPost(Task1Sem);
}
...
}
void main(void) {
...
OSTaskCreatePeriodic(f
Task1Sem = OSSemCreate(0);
i, Ti,
φ
...
i, s, i);
} ...
}
• Synchronize loop
iterations using
semaphores
Mike Holenderski, [email protected]
49
Summary of mutual exclusion primitives
Primitive
Pros
Cons
Disable
interrupts
• Avoid deadlock
• Simple implementation
• Prevent interference from
interrupts
• Higher priority tasks not sharing
resources are penalized
• Interrupts can be missed
Disable
scheduler
• Avoid deadlock
• Simple implementation
• Allow interrupts
• Higher priority tasks not sharing
resources are penalized
• Cannot guard resources shared with ISRs
Mutex
• Allow interrupts
• Higher priority tasks not sharing
resources are not penalized
• Avoid “unbounded” priority
inversion
• Can lead to deadlock (depends on
implementation)
• Cannot guard resources shared with ISRs
• Suspension not allowed in ISRs
Semaphore • Allow interrupts
• Higher priority tasks not sharing
resources are not penalized
Mike Holenderski, [email protected]
50
•
•
•
•
Can lead to deadlock
Cannot guard resources shared with ISRs
Suspension not allowed in ISRs
“Unbounded” priority inversion
References
• Recommended reading:
– [Burns] Ch. 5.1-5.4, 11.8, 11.9
– Mike Jones, “What really happened on Mars?”,
1997
• http://research.microsoft.com/~mbj/mars_pathfinder/
mars_pathfinder.html
– T. Baker, “Stack-based scheduling for realtime
processes”, Journal of Real-Time Systems, vol 3,
1991
Mike Holenderski, [email protected]
51