EMC_VPLEX_Family_Technical_Overview

Download Report

Transcript EMC_VPLEX_Family_Technical_Overview

with
For Continuous Operations,
VMware and Oracle RAC
© Copyright 2013 EMC Corporation. All rights reserved.
1
Why is VPLEX Unique?
VPLEX enables users to:
– Have the exact SAME information
▪ In two separate locations
• Accessible at the SAME time from both locations
© Copyright 2013 EMC Corporation. All rights reserved.
2
VPLEX & AccessAnywhereTM
Enabled by Distributed Virtual Volumes
•
Provides shared storage, concurrently
read and write accessible, with the
same storage identifiers, across sites.
•
Supports all major EMC and Non-EMC FC
storage platforms.
•
Supported by nearly all open systems
application clustering technologies.
•
•
Simplifies High Availability and Disaster
Recovery design and operations.
Enables 100% storage availability.
© Copyright 2013 EMC Corporation. All rights reserved.
LUN
1V
Distributed Virtual Volume
LUN
1P
LUN
1P
LUN
2P
LUN
2P
Datacenter A
Active Failure Domain
Datacenter B
Active Failure Domain
3
VPLEX makes VNX Active/Active
Increase Availability, Increase Capacity, Increase Performance
Building Block Approach to Storage
A
P
A
P
A
P
A
P
A
A
A
A
A
A
A
 Load balance across multiple VNX
arrays to maximize utilization and
performance.
A
OR
A
SP A
SP B
P
A
P
SP A
P
A
A
SP B
P
A
P
A
P
SP A
A
P
A
P
SP B
 With VPLEX, two VNX arrays can be
configured to provide full online
redundancy for each other within or
across sites.
 Data remains available and
online, even if a whole array fails.
VNX5700
VNX5300
VNX5300
VNX frame-based licenses
© Copyright 2013 EMC Corporation. All rights reserved.
New
 Lower cost of entry, size for now
and scale non-disruptively in the
future.
4
VPLEX: Availability From The Ground Up
4 front-end 8 Gb/s FC ports per director
Engine
Director A
Director B
Front End Back End
Front End Back End
Host & Array Ports
Host & Array Ports
Core Core
Core Core
Core Core
Core Core
Core Core
Core Core
Core Core
Core Core
Distributed
Cache
Distributed
Cache
Inter-Cluster Intra-Cluster
COM
COM
Inter-Cluster Intra-Cluster
COM
COM
A
B
A
B
A
B
A
B
4 back-end 8 Gb/s FC ports per director
Dual quad core processors
Large distributed cache maintains
locality information, enabling fast cache
read performance
COM interfaces provide inter-director
communication for scalable I/O
processing and distributed deployment
2 directors per VPLEX Engine
Up to 4 engines (8 directors) per VPLEX
Cluster
© Copyright 2013 EMC Corporation. All rights reserved.
5
VPLEX Witness plus Cross-Cluster Connect
Site 1
Site 2
VPLEX
• VPLEX Witness
–
Coordinates seamless failover
–
Enables longer distance for stretched
server clusters
–
Provides zero RTO for storage
changes or events
WITNESS
• Cross-cluster connect
Site 3
Active
Federated AccessAnywhere
Active
•No more than 5ms round trip latency between clusters
•With Cross Connect latency must be no more than 1ms
•Witness can have up to 1 second of latency
© Copyright 2013 EMC Corporation. All rights reserved.
–
Ideal for shorter distances
–
Leverages multipathing software
–
Trade off of higher host availability
and CPU cycles
–
Reduces server failovers
6
Introducing VPLEX into Your Environment
Encapsulation Method
Host
Data-in-Place Migration
Minimal
Disruption
VPLEX
(No data copy)
1. Connect to VPLEX and mask volumes
2. Import volumes into VPLEX (1:1)
3. Unmask old path
4. Present volumes from VPLEX
5. Remount volumes
Array
© Copyright 2013 EMC Corporation. All rights reserved.
7
Introducing VPLEX into Your Environment
Host Migration Method
Host
No Disruption
VPLEX
Array
Use Host Based Tools :
Storage vMotion or Volume Managers
1.
Connect additional storage to VPLEX
2.
Create volumes in VPLEX
3.
Present volumes to the host
4.
Use host copy tools to copy data from
array to VPLEX volume
Array
© Copyright 2013 EMC Corporation. All rights reserved.
8
VPLEX for Migrations
Limit Risk – Less complexity, fully reversible
Save Money – Lower or eliminate services costs
Faster Time to Value – Leverage new arrays in days
Powerful TCO – All future tech refreshes are FREE!
No Downtime – Non-disruptive process
© Copyright 2013 EMC Corporation. All rights reserved.
9
Traditional VMware DR Active-Passive Solution
Disaster Recovery
Traditional Active – Passive Solution
 Manual intervention to initiate
failover in the event of an outage
HA
SRM
 Dynamic job relocation (vMotion)
only possible within the datacenter
 Site failure or major infrastructure
outage results in application
disruption
 Double the capacity, but only the
I/O utilization of one array
 Additional, inaccessible servers
required at DR site
Certified
© Copyright 2013 EMC Corporation. All rights reserved.
Array
Replication
Active Failure Domain
Passive Failure Domain
10
VNX with VPLEX for VMware– Active/Active Solution
Continuous Availability, Next Generation DR, Load Balancing
Active – Active Solution
 vMotion across datacenters for nondisruptive load balancing, maintenance,
and workload re-location
 Automatic failover and restart between
the sites using VMware HA - no manual
intervention
 The loss of a storage array or requirement
for planned downtime does not result in
ANY application interruption
VMware vMotion
VMware HA
VMware DRS
VMware FT
VPLEX Metro
 VMware DRS for full utilization of compute
and storage resources across domains
Certified
© Copyright 2013 EMC Corporation. All rights reserved.
Active Failure Domain
Active Failure Domain
11
VNX with VPLEX + RecoverPoint for VMware
Three Site (Synchronous and Asynchronous) Availability
Enhanced
Availability
VMware vMotion
VMware HA
 Combines shortand long-distance
(1000s of km)
VMware DRS
VMware FT
VMware SRM
VPLEX Metro
 Leverages SRM for
DR site
EMC
RecoverPoint
 RecoverPoint
integration
eliminates HW
requirement
Automatic
Failover
Active Failure Domain
Automated
Failover
Active Failure Domain
Passive Failure Domain
Certified
© Copyright 2013 EMC Corporation. All rights reserved.
12
VNX with VPLEX for Oracle RAC
Extended Clusters for Continuous Application Availability
Oracle RAC can
now achieve dualsite continuous
operation without
complexity and
ongoing
management issues
 Zero RPO and Zero RTO over
distance
 Full utilization of resources at
both sites
 Simple management
 No customization – standard
Oracle RAC implementation
 Full certification from Oracle
Certified
© Copyright 2013 EMC Corporation. All rights reserved.
13
What’s new with VPLEX 5.2
Extends VMware Integration:
Support of hardware acceleration
using VAAI Block Zero
Virtual Volume Expansion: Expand
local and distributed virtual volumes
non-disruptively
Larger and adjustable IO Block
sizes: Increase VPLEX performance
and network utilisation rates by
increasing the IO Block sizes from
128KB up to 1MB
Enhanced RecoverPoint Integration:
Increases scale from 2K to 8K
volumes via multiple RPA clusters
© Copyright 2013 EMC Corporation. All rights reserved.
VPLEX frame-based licensing with
VNX: This new licensing option
makes VPLEX easier to order with
VNX arrays
Free Migration License: Unlimited
capacity, 180 day license for tech
refresh
SRM Suite VPLEX Report Pack:
Delivers health reporting for the
VPLEX directors: Frontend and
Backend IOPS, bandwidth and
status; Virtual Volume health; locality,
read/write IOPS and status; storage
volumes health; capacity planning
and trending; performance metrics
14
VNX with VPLEX for Continuous Operations
Improved Availability, Mobility And Accessibility
VPLEX allows
customers to never
have planned or
unplanned
downtime again –
all data is
continuously
available
© Copyright 2013 EMC Corporation. All rights reserved.
 Increased availability
 Zero RTO and Zero RPO over distance
 Full utilization of resources at both sites
 Accelerated tech refresh
 Ride through component or VNX array
failures
 Active-active data access
 Increase resource utilization
15
Autostandby
 Currently in PowerPath, if you do not want a
path used, you can set it to standby
 Autostandby adds a trigger that causes a
path to be put in autostandby mode
– Behaves just like standby
– User set standby always has precedence
 Use cases
– Detect a flaky path
– Detect groups of paths connected to local
and remote array controllers in a federation
(VPLEX Metro)
© Copyright 2013 EMC Corporation. All rights reserved.
17