Transcript GRINDING WHEELS - G

GRINDING WHEELS
for Tube Mill Line
www.enicorp.co.kr
#402, Daebok BDG, 10, Hwasan-ro, 233 Beon-gil, Jangan-ro
Suwon-si, Gyunggi-do, 440-825, KOREA
TEL : 82-31-294-2273, FAX : 82-31-294-2274
-Mobile : +82-10-6663-1674
e.mail : [email protected]
Skype : charyjeong
GRINDING WHEEL > GPB
FEATURE
No eye acridity, excellent endurance & grinding power.
As substitute with steel & hemp buff, be good at wear
abrasion, flexible, grinding powers..
Good at surface illuminometer
USE
Remove scale for Steels & nonferrous metals or pipe
polishing. Remove burr of press, punching machines.
Finished polishing of rolling roll or piston.
Each Watch case’s surface polishing
Outer Circumference
205㎜ ~ 355㎜
8˝~ 14˝
Thickness
16㎜ ~ 100㎜
2/3˝~ 4˝
Hardness
Grade
Particle
▶Max rotation allowance : 1,800 RPM
M
H
# 24 ~ # 800
A
C
GRINDING WHEEL > NPB
FEATURE
Excellent skills of narrow, deep polishing it need the surface
soft & elegant.
USE
Copper’s nose part
Each industrial machineries welding parts
Sink’s corner welding part
Use for hand grinding if the parts can ‘t move
Outer Circumference
Thickness
100㎜ ~ 406㎜
4˝~ 16˝
5㎜ ~ 50㎜
1/5˝~ 2˝
Hardness
M
H
Grade
Particle
▶Max rotation allowance : 1,800 RPM
# 60 ~ # 320
A
GRINDING WHEEL > WOOD TEX
FEATURE
It’s accomplished porosity formation on nature foaming
condition so no burning state by frictional heat and
specially can’t transform the molding shapes.
USE
Each furniture parts for straight molding products.
(for skeleton polishing, automatic line)
Outer Circumference
205㎜ ~ 255㎜
8˝~ 10˝
Thickness
25㎜ ~ 100㎜
1˝~ 4˝
Hardness
Grade
Particle
▶Max rotation allowance : 1,800RPM
M
H
# 100 ~ # 150
A
GRINDING WHEEL > CARBON TEX
FEATURE
A s a memorial stone which compound of poly vinyl acetal and
can use for steel & nonferrous metal’s curve part or square
backs and end face of plate glass.
USE
Watch case or curve of bend part or curve part polishing
Special steel of SK-5, SK-11’s hair line or final finished polishing.
B-type for jewelry polishing or end face of plate glass.
Edge polishing for back side TV braun tube’s glass.
Outer Circumference
Thickness
150㎜ ~ 305㎜
6˝~ 12˝
4㎜ ~ 100㎜
1/5˝~ 4˝
Hardness
S
B
Grade
# 60 ~ # 1000
Particle
▶Max rotation allowance : 2.300 RPM
C
WA
GRINDING WHEEL > UB-TEX
FEATURE
After plasticity of pottery, it’s excellent for finished
lower part polishing.
Mold elastic foam so properly use for hand
operated.
Using abrasive grain which specially coated, so
outstanding to grinding ability and endurance is too
strong.
Outer Circumference
Thickness
Hardness
Grade
Particle
▶Max rotation allowance : 1,800 RPM
205㎜ ~ 255㎜
15㎜ ~ 25㎜
S
M
# 46
WA
8˝~ 10˝
2/3˝~ 1˝
H
GRINDING WHEEL > KS-TEX SF
FEATURE
The most powerful polishing ability which include highest
content of polish particles.
Minimize the impact to the workers which include Super Soft
Foam resin.
Long term work with stability cause of the excellent elastic
and occur less heat yield.
USE
For hair line cleaning of steel & nonferrous metals.
Surface treat of Watch case or glass frame.
Finishing grind of each Cylinders or funitures after coating.
Outer Circumference
205㎜ ~ 305㎜
8˝~ 12˝
Thickness
15㎜ ~ 100㎜
2/3˝~ 4˝
Hardness
S
M
H
Grade
# 120 ~ # 400
Particle
A
C
▶Max rotation allowance : 1,800 RPM
INDUSTRIAL SCRUBBER
FEATURE
Special made, use Nylon felt and use both dry process or
wet rot which connect with special resin for achieve
best grinding power.
USE
Finishing work of steel or nonferrous metals and
furnitures.
Remove melt or pollution according to the grinding
particle’s sort or rough.
Form
Max Dimension(m/m)
Max Dimension(Inch)
Thickness
Grade
Particle
SHEET
ROLL
300×300
300×11,000
12 × 12
12 × 430
1/5˝~ 1/3˝
㎜ ~ 8㎜
＃120 ~ # 400
A
C
INDUSTRIAL SCRUBBER > HI-LAP
FEATURE
Required elastic & grinding power, suitability for surface
treatment using Air tool.
USE
Crank shaft surface treatment.
Melt or Oil removement
Outer Circumference
Thickness
150㎜
6˝
7㎜
1/3˝
Grade
# 60 ~ #120
Particle
A
INDUSTRIAL SCRUBBERKS > TEX- PC
FEATURE
Remove for Burr or scale which of stainless & nonferrous
metals.
Use special Resin which strong water proofing, possibly use
wet rot products.
Improvement surface illumination work.
Excellent for soft metal’s hair line or fitting after glossy.
USE
Each plates (Nickel, chrome, etc) steel sheets cleaning.
Steel sheets cleaning after washing acid, alkalize.
Remove an oxide after annealing.
Final treatment each nonferrous hair line.
For hair line of Brass frame.
PCB surface treatment.
Outer Circumference
Thickness
Hardness
Grade
Particle
▶Max rotation allowance : 1,800 RPM
Particle
▶Max rotation allowance : 1,800 RPM
205㎜ ~ 520㎜
25㎜ ~ 1,060㎜
S
M H 2H
# 80 ~ # 1,000
A
C
A
C
8˝~ 21˝
1˝~ 42˝
GC
GC
INDUSTRIAL SCRUBBERKS >TEX CRRF
FEATURE
Excellent cleaning work of each coating or plating.
Suitable for Silver light hair line of nonferrous metal.
Good at grinding power and surface treatment, make
shortening working time, asset for surface roughness work.
Excellent durability, each particle’s tensile strength is high
Possible to control elasticity control so materialized
optimum conditions.
USE
Middle step’s grinding each platings(Nickel, alkalize)
Grinding each cylinder pipes, before after plating.
Grinding mike glass frame before after plating.
Outer Circumference
Thickness
Hardness
Grade
205㎜ ~ 355㎜
15㎜ ~ 100㎜
Particle
▶Max rotation allowance : 1,800 RPM
8˝~ 14˝
2/3˝~ 4˝
c
# 80 ~ # 800
A
C
INDUSTRIAL SCRUBBER > POLY-BELT
FEATURE
It’s a Belt with forming steps made mixed with
insolubility PVA Fiber including PVA resin &
thermoplastic resin after forming make the Belt
acetylate.
USE
Grinding for final treatment work or hair line grinding.
Form
Width
Length
Grade
Particle
ROLL
25㎜ × 150㎜
15m
# 120 ~# 400
A
C
1˝~ 6˝
60˝
INDUSTRIAL SCRUBBER > KS TEX-PW
FEATURE
Suitable for automatic line. Excellent grinding power &
can product which various particle & size.
Suitable for request soft surface when working it
occurred less heat
USE
Final grinding treatment or after rolling remove scaling
for steel or nonferrous metals. Or furniture, bed, photo
frame’s final grinding before or after coating.
Final grinding each nonferrous metals hair line.
Outer Circumference
Thickness
205㎜ ~ 406㎜
16㎜ ~ 850㎜
8˝~ 16˝
2/3˝~ 34˝
Hardness
S
M
H
Grade
Particle
▶Max rotation allowance : 1,800 RPM
# 80 ~ # 3,000
A
C
INDUSTRIAL SCRUBBER > KS TEX-RW
FEATURE
Excellent work for curve parts which have elastic & durability.
Excellent work for final finishing work of each materials like
stainless, nonferrous metals, or wood’s hair line.
USE
Finishing treatment for watch, glass frame’s each hair lines.
Grinding for aluminum materials like cycle, motorbike
Molding work for wood.
Final grinding for knifes, scissors.
For Bevel round of final grinding for edge of TV braun tube
front glass
Outer Circumference
205㎜ ~ 305㎜
8˝~ 12˝
Thickness
12㎜ ~ 100㎜
1/2˝~ 4˝
Hardness
S
Grade
# 80 ~ # 800
Particle
▶Max rotation allowance : 1,800 RPM
A
M
H
C
INDUSTRIAL SCRUBBER > KS TEX-RV
FEATURE
Good to grinding & durability used special resin which
has abrasion resistance & heat resisting property & Nylon
fabric.
Use wet rot, various size and suitable for automatic line.
USE
Final treatment grinding of stainless or nonferrous metals
hair line
Centerless grinding of steel or nonferrous
Improvement illumination work after grinding bars or
grinding bars after or before plating.
For TV braun tube back side glass edge.
Outer Circumference
205㎜ ~ 405㎜
8˝~ 16˝
Thickness
22㎜ ~ 205㎜
2/3˝~ 8˝
Hardness
S
M
H
Grade
# 80 ~ # 1,000
Particle
A
C
▶Max rotation allowance : 1,800 RPM
INDUSTRIAL FELT / MS-WHEEL
FEATURE
Obtain soft grinding surface special treatment fabric with
final gloosy wheel and forming with special resin.
Various sizes for each products and many different uses as
soft, medium, and hard type.
USE
Final treatment for glossy of TV braun tube frond glass edge.
For each plate glass’s final end facing.
Glossy grinding for steel or nonferrous metals.
Outer Circumference
150㎜ ~ 600㎜
6˝~ 23˝
Thickness
25㎜ ~ 100㎜
1˝~ 4˝
Hardness
DS
Grade
# 1,000 ~ # 8,000
Particle
▶Max rotation allowance : 1,800 RPM
A
DM
DH
C WA C
INDUSTRIAL FELT / ROUGE RAP
FEATURE
As final surface grinding for TV braun tube front glass
surface, many different size & products developed.
USE
I-TYPE & XY-TYPE models.
Choosen by valve producing company’s grinding
conditions.
Braun tube bulb(PANEL) final treatment grinding
PANEL PART
10”, 14”, 20”, 21”, 25”, 29”, 32”