Background and Capabilities Presentation 2010

     1976: Elreha GmbH was established in Hockenheim, Germany, designing and manufacturing temperature controls to supply the European Market.

1990: Elreha Printed Circuits Corp. was founded in St. Petersburg, FL as a means to provide cost effective PCBs to Germany and later become a leading PCB supplier in the North and South American Market. 1995: EPC ELREHA Leiterplattentechnik GmbH was founded to provide PCBs to the European market and further support our controls division.

1998: HT Global Circuits was established as a division of Elreha to provide our customers with offshore products/pricing 2000: Elreha Jordan was established, specializing in hardware, software and web solutions. It was also a strategic expansion of our manufacturing capability at offshore cost for controls assembly.

 Elreha Printed Circuits Corp.

 Established in 1990  Located in St. Petersburg, FL  75 Employees  2 Shifts  40,000 sq. ft.



Materials

         Standard FR-4 Tg’s Polyimide Rogers (4000 Family) Taconic Dupont Pyralux flex/rigid flex Berquist - HT-1 and MP Arlon Neltec Hybrids  Applications Technologies      RF Thermal Management Heavy Copper  4 oz Internal  6 oz External Flex/Rigid Flex Standard Commercial Applications  Single Sided  Up to 20 Layers



Board Sizes

   16.5x22.5/18.5x22.5 and smaller Up to .250” Thick (Double sided) Minimum Dielectric .001” 

Final Finishes

       Leaded Solder (HASL) Lead-Free Solder (LFHASL) Electroless Ni/Immersion Au (ENIG) Hard Nickel/Gold for contact surfaces Silver OSP Immersion Tin (outsource)

 Drill & Rout        Blind Vias Buried Vias Blind/Buried Vias Minimum Drilled Hole .010” Minimum Annular Ring .002” Drill Tolerance  Plated +/- .003”  NPT +/- .002

Smallest Radius .010”  Inks     Minimum Dams .003” Minimum Clearance .004” over pad size Nomenclature  .060” High X .007” Wide  Minimum Clearance .005” from the pad Manufacturers  Taiyo PSR series   Coates Probimer 77

 Additional Items  Controlled Impedance 10%   Line Width Control within +/- .0005” (up to 1 oz) Line Width/Spacing  .003”/.003”  Test  Fixture Testing      Flying Probe Testing .010” Pitch High Pot Ionics Cross section

 Reverse Engineering Capability  PCB Design Layout Capability  Global Engineering Staff with Universal Tooling  Altium Software

 Certifications and Standards       UL 94v-0 (US and Canada) ISO 9001 TS 16949 MIL 55110 ITAR IPC 6012/ IPC-600