Preventative Maintenance - Institute for Transportation

Download Report

Transcript Preventative Maintenance - Institute for Transportation

Preventative Maintenance
NCDPI
Purpose of Preventative
Maintenance
 The Preventive Maintenance Program is a result of public
school law.
 It assures a uniform standard of maintenance necessary to
provide a safe transportation environment for the students
in the Public Schools of North Carolina.
 It also provides planned maintenance intervals that should
increase the efficiency of school bus fleets and provide
long term savings from costly repairs.
 Therefore, it is each LEA’s responsibility to maintain their
school buses as described in the PM Manual.
Purpose of Preventative
Maintenance
 The program presented in the PM manual
represents the minimum requirements for all
school buses and service vehicles in the Public
Schools of North Carolina. However, MORE
FREQUENT SERVICE may be warranted in
your county. The intent of this maintenance
program is to promote repair consistency and cost
efficiency, and assure that school buses and service
vehicles are in safe operating condition.
NCGS Requirements for
Preventative Maintenance
The State Board of Education is given statutory authority to fund
public school transportation operations and the replacement of
vehicles. Specifically, it is the responsibility of the State Board of
Education to periodically
"...adopt such rules and regulations with reference to the
construction, equipment, color, and maintenance of school buses.
No school bus shall be operated for the transportation of pupils
unless such bus is constructed and maintained as presented in such
regulations."
North Carolina General Statute 115C-240(c)
PM Management with SAP
 Preventive maintenance schedule
 Preventive maintenance work orders
 Inventory management for repair parts and tires
 Vehicle maintenance and repair costs histories
IP24 PM Due Screen
Double Click on MntPlan
to Show information about
the PM that is scheduled.
Maintenance Plan General
Information
Use the arrows to select the
“Maintenance plan schedule calls”
click this tab
PM Information
Computer
Planned
Date
(Based on
mileage
history)
PM DUE
6K12K24K48K
Previous
PM
Mileage
PM Due
Mileage
Current
Mileage
PM Scheduling
 Orders generated every 6000 miles
 PM’s on new buses are generated every six
thousand miles.
0 mile (48K PM order generated at LEA)
2. 6000 mile; 6K PM Order
3. 12000 mile; 12K PM Order
4. 18000 mile; 6K PM Order
5. 24000 mile; 24K PM Order
6. 30000 mile; 6K PM Order
7. 36000 mile; 12K PM Order
8. 42000 mile; 6K PM Order
9. 48000 mile; 48K PM Order
10. 54000 mile; 6K PM Order
11. 60000 mile; 12K PM Order
1.
PM Scheduling
 Older buses that were transferred into SAP will
begin the cycle at the transferred mileage and will
pick up on the schedule from where it was
transferred.
Example: A bus with a 24,000 mile PM performed at 23,450 miles that
was transferred from the old system, will have the 30,000 mile pm
due at 29,450 and the 36,000 mile pm due at 35,450. All future
pm’s will be at 6000 mile intervals from 23,450.
 All PM plans are generated automatically, they are
called (assigned an order number) when the
vehicle is 900 miles from the next PM mileage.
Sample PM order
Page 1 of ____
NC PUBLIC SCHOOLS TRANSPORTATION
PM WORK ORDER (sample)
ORDER #
PLANT
DOT SHOP
EQ/INV #
SAP EQ #
METER READING
EQ DESC
LUBECHART
YEAR
MAKE
MODEL
START DATE
LIC PLATE
VIN #
WORK DESCRIPTION
OPERATION
0010
DESCRIPTION
Change oil and filter
TIME
_______
OPERATION
0020
DESCRIPTION
Lube grease fittings and check fluids
TIME
A, B, C or
D
053-999
07
_______
OPERATION
0030
DESCRIPTION
Lube door/hood hinges and latches
TIME
053-999
07
_______
OPERATION
0040
OPERATION
0050
DESCRIPTION
Record trans. shift points
Trans. shift points 1-2 ___ 2-3 ___ , etc.
DESCRIPTION
Record governor speeds and variance
High ____ Low _____ Var. _____
TIME
TIME
_______
027-024
06
034-001
06
PM Summary
Success of this maintenance program will be assured
through the cooperation of all local transportation staffs.
The prescribed school bus garage operational procedures
are to be followed as closely as possible, depending upon
staff, facilities, and available shop equipment.
Questions regarding the contents of this manual should be
directed to DPI Transportation Services
Surplus Equipment
NCDPI
Process for Bidding Materials
and Equipment
1.
2.
3.
Most items with a salvage value, purchased with state
dollars must be disposed of by state surplus. This disposal is
coordinated through NCDPI for all school bus garages in
North Carolina.
Contact area transportation consultant and provide a list of
scrap metal, parts, etc you want to place on sale.. (E-mail
works really good for this part and is preferred).
Consultant will complete form TD-13 listing the material
for bidding. A copy will be sent to the LEA and NCDPI for
processing.
Process for Bidding Materials
and Equipment
4.
5.
State Surplus will solicit bids for the materials,scrap, etc.
They will send the LEA a copy of the BID SHEET that has
their materials,etc on it. LEA are encouraged to provide
information to prospective buyers on the equipment listed
for sale.
Upon awarding a BID a pink (bid-award)sheet will be sent
to the LEA indicating who won the BID. The buyer will
also be sent a pink (bid-award) sheet. The material should
not be released until a pink sheet is received or the buyer
has pink sheet in-hand (make a copy if you haven’t received
one yet) when they come to pick up the materials, etc. We
do not accept any payment for property that was on BID.
This is collected by State Surplus and the buyer is given the
pink sheet upon payment. It is OK to release the material
when you have a copy of the pink sheet.
Process for Bidding Materials
and Equipment
6. Bidding of equipment with titles
requires the title to be sent to NCDPI
UNSIGNED, along with a odometer
statement and a vehicle damage/flood
statement.
Surplus Vehicles
Prior to being priced, all buses shall have the lettering removed and the bus
appearance altered in the following manner. The front and rear panel which
formerly had "School Bus" indicated shall be painted from the flashing light on
the left to the flashing light on the right, a color other than school bus yellow.
Also, the area of the body which formerly indicated "NC Public Schools" shall be
painted a color other than school bus yellow. The painted area is to be the full
length of the bus. Buses which are obsolete will be priced for sale or bid on a TD13 Discarded Equipment Form by your regional area transportation consultant.
Buses shall not be sold unless priced in writing on the proper form prior to sale by
the area transportation consultant.
Service vehicles, fuel trucks, tire trucks and wreckers shall have all lettering
removed prior to being placed on bid (unless sold to another school system).
Process for Selling Priced Buses
1.
2.
3.
Contact Area Transportation Consultant and provide a list of
the buses you want to place on sale.
(E-mail works
really good for this part and is preferred.)
Consultant will complete form TD-13 listing the buses for
sale and the price of each bus, a copy will be returned to the
LEA and another copy sent to Jeff Moore for listing on the
School Bus web page @ http://ncschoolbussales.dpi.state.nc.us/.
Prices are firm unless the bus has remained on the yard for a
1 year or longer or the buyer is planning on purchasing
more than one bus. Contact Jeff Moore for any reductions in
price. Be sure to let the prospective buyers know that this is
an as-is sale.
Process for Selling Priced Buses
4.
5.
Upon agreement of the sale, the buyer must pay for the bus
with a certified check or money order payable to NC State
Surplus Property. It is best not to start any paperwork until
you have this check in hand. The LEA will provide the
buyer with a bill of sale. (this can be created with any word
processing software, etc.) The title will be signed over to
the buyer at this time. (NOTE: SIGN OVER TITLES ON
PRE-PRICED EQUIPMENT: DO NOT SIGN OVER
TITLE ON EQUIPMENT UP FOR BID)
The LEA will forward the Certified Check or Money Order
along with the TD-13 Bus For Sale form to NCDPI
Transportation Services. This form can be downloaded @
http://www.ncbussafety.org/download/TD-13BUSALEFORM.doc
Process for Disposing of tires
1.
2.
3.
4.
5.
The scrap school bus tire contract has been awarded to
North & South Truck Tires Sales out of Clayton, NC.
You may call them to schedule pick up at 919-550-2735.
Please read the information below as it defines what a scrap
tire is and explains how North & South Truck tires Sales
will pick up the scrap tires at your location.
Scrap tires are defined as those tire casings that are no
longer suitable for capping.
The scrap tire must meet one or more of the following
criteria and only those tires deemed by the transportation
director or designee as "ready to discard" are to be
considered as scrap:
Process for Disposing of tires
All casings with obvious visual damage (check warranty if
applicable).
7. All casings previously capped two or more times (check
DOT recap stamp).
8. All casings five years or older (check DOT serial number).
9. All casings for which no bids were received.
10. All Yokohama brand casings.
6.
Process for Disposing of tires
11. Contractor will be responsible for picking up tires within
twenty (20) working days after notification from the school
bus garages. The contractor must report to the
transportation director or school bus garage supervisor
and/or staff upon arrival at the garage. The garage
personnel will supervise the dispersing of the scrap tires. If
several "lots" of tires are on hand (i.e., virgin, surplus, or
scrap), the contractor must be told which tires to load.
Upon pickup of tires, the contractor must complete a Scrap
Tire Pick Up form provided at each site.
12. The Scrap Tire Pick Up Form is attached and also on DPI's
website at http://www.ncbussafety.org/reports.html
Process for Disposing of tires
13. Look under the heading Reports and Forms, School Bus
Maintenance Forms.
14. If you have any questions, please contact Jeff Moore at
[email protected]