Transcript Accord DG12000_GB_04.08

Kverneland Accord DG
Product Information 2015
Kverneland Accord DG
High performance seed drill from 9 to 12m
DG 9.000 to 12.000 – Content
 Frame Concept
 Transport
 Folding process
 Headland management
 Depth adjustment
 “Active on”
 Coulter
 Metering device
 Hopper filling
 Wheels
 Track marker
 Electronics
 Technical data
 Main advantages
DG 9.000 to 12.000 – Frame concept
Central seeding depth
adjustment
Cross Shaft coupling
CAT 3 N (3; 4 N)
Rear frame with coulter
bar attachment
Main frame 100x180mm
800mm flotation tyres
Independent Wing sections
2 x 4,5m (6m)
Flotation tyres for wing support
46cm Coulter offset
DG 9.000 to 12.000 – Road transport
4m
• Short and compact frame design
• Flotation tyres (800/45x26,5)
• Released for 40km/h Transport speed
• Double circuit air brakes as standard
• Lighting equipment
3m
DG 9.000 to 12.000 – Transport
DG 9.000 to 12.000 – Folding / Unfolding
1
2
3
4
Quick switch from transport to field position
1) Transport position
2) Folding of wing sections
3) Lowering of coulter bar and setting up of distribution heads
4) Ready to work
 Complete sequence is controlled from the tractor cab!
Automatic transport lock
DG 9.000 to 12.000 – Folding / Unfolding
Quick switch from transport to field position
1) Transport position
2) Folding of wing sections
3) Lowering of coulter bar and setting up of distribution heads
4) Ready to work
Complete sequence is
controlled from the
tractor cab!
DG 9.000 to 12.000 – Head land position
• Complete coulter bar is lifted (high ground clearance for the coulters)
• Only main cylinder is acting whilst the coulter / wing pressure is released to the system
• Track markers changeover can be combined with the turning sequence  easy operation
• Support wheels are just carrying (balancing) the weight of coulter bar wings
• For the next working pass all former settings are memorised
DG 9.000 to 12.000 – Seeding depth adjustment
Step less
adjustable stop
for valve
• Central seeding depth adjustment at the main frame cylinder via stop valve
• Seeding depth is adjusted by lifting/lowering the coulter bar, the press wheel stays fix
• No additional adjustments on coulters / press wheels required
DG 9.000 to 12.000 – Seeding depth adjustment
• Adjustment on one screw for 12m working width  less risk of false adjustment!
DG 9.000 to 12.000 – “Active On”
• Hydraulic adjustment of coulter pressure is linked to the side wing pressure
• Easy adaptation to changing soil conditions
• Step less adjustable up to 80 kg per coulter
• In combination with Focus 2 / Tellus it is adjustable via the terminal
DG 9.000 to 12.000 – CX Ultra coulter
• New design of coulter body  weight reduction
• 460mm coulter clearance  blockage free work
• Up to 80kg coulter pressure  good penetration
• Coulter distance 125mm
• Ø 410mm cutting disc
• Maintenance free bearings  no greasing!
• Press wheel 330 x 50 as standard
• No single adjustments at the coulter requested
DG 9.000 to 12.000 – Combined seedbed preparation
Clod Board
Double row tine section
• Hydraulic adjustable
• Hydraulic adjustable
• Optimum seed bed levelling
• Optimum seed bed levelling
• Individual overload protected paddles
• Individual overload protected Tines
• Possible to set aside from operation
• Possible to set aside from operation
DG 9.000 to 12.000 – Metering devices
Radar equipment for
machines with electrical
driven metering device
Mechanical drive
• Precise Kverneland Accord metering devices
• Step less adjustable application rate from 2 – 330kg / ha
• Suitable for fine seeds as well as cereals
• Mechanical drive as standard; electric drive on ISOBUS 11783 as option
• Land wheel brake to avoid “overdosing” on head lands at high working speed
Electric drive
DG 9.000 to 12.000 – Seed hopper
• 6000 litre volume
• Loading step for save access to the hopper
• Easy hopper emptying device on each side
• Height adjustable low level sensors
• Clear inside design: catwalk, sieves, steps…
• Easy access for refilling of seed
• Control windows on different levels
• Water and dust tight hopper cover
DG 9.000 to 12.000 – Wheels
• 800mm flotation tyres on the carriage axle  less tracks in the field
• Flotation tyres as well for single wing arms
DG 9.000 / 12.000 – Track marker
• Completely folded in for transport as well as for field operation
• Overload protection via shear bolt look and clamping 200 Nm
• Operation can be combined with head land turning sequence  safes time and manual requirement
DG 9.000 to 12.000 – Agility
• 90° headland turns possible even with twin tyres
• save and easy operation
DG 9.000 to 12.000 – Clearness
• Clear machine overview from the tractor cab
• Visible working areas: Clod Board, Harrow section, metering devices, hopper, coulters…
DG 9.000 to 12.000 – Clear control
• All electronics are placed at the front of the machine  water protected and good access
• Hydraulics, brakes and tramline distribution box in the rear between the wheels
• Safety lock and brake adjustment block at the left frame side in driving direction  good access  it will
be used…
DG - Seed drill control systems
SIGNUS
With mechanical metering device drive
FOCUS II
IsoMatch Tellus
With electric metering device drive ISOBUS (ISO 11783)
DG – IsoMatch Tellus
The next generation universal ISOBUS
Terminal – IsoMatch Tellus
• Two ISOBUS interfaces in one terminal
• Multifunctional ergonomic design
• ISOBUS Shortcut Button
The IsoMatch Tellus is the first ISOBUS terminal in
the world with the capability to operate different
machines on 2 screens through 1 terminal, without
the need to constantly toggle between screens.
Seed flow control system
Seed-flow monitoring
• For pneumatic seed-drills
• independent machine control system
• monitors the seed distribution tubes automatically
recognizing and reporting any blockages or errors
• easy localization and removing of troubles
DG 9.000 to 12.000 – Technical data
General:
•
Available in 9, 10 (ESA only) and 12m working width
•
800mm flotation tires and double circuit air brake axle as standard
•
6.000 litres seed hopper volume
•
Coupling with Cross Shaft Cat. 3 N
•
Central seeding depth adjustment
•
“Active on” for automatic pressure adjustment on coulters and side wings
•
Possible to equip with Clod Board or double tine harrow section for optimum seed bed quality
•
Seed rates from 2 – 330kg applicable
•
Electric metering device drive on ISOBUS standard 11783 as option
Coulters:
•
CX Ultra coulter with 12.5cm coulter distance and press wheel 330 x 50
•
Up to 80kg coulter pressure
•
New unique design
•
Patented self cleaning CX disc pairing
DG 9.000 to 12.000 – Main arguments
• High hectare performance
• Precise Metering
• Time and fuel saving
• High resale value
• Optimum coulter performance
• Easy setting of the machine
• Very good floating of the coulter bar wings
• Flexible in use of different conditions
• Different tramline systems for all needs
DG 9.000 to 12.000 – prepared for growth…
Kverneland Accord DG:
High capacity seed drill !
visit us at www.kvernelandgroup.com
The Future of Farming
www.kverneland.com
See our
Machines
at work
on YouTube