Transcript FUNDAMENTALS_PIPELINE_ENG

A Four Day Course on
Organised by
FUNDAMENTALS OF
PIPELINE ENGINEERING
2 – 6 January 2006
In collaboration with
| UTM City Campus, KUALA LUMPUR, Malaysia
Kuala Lumpur Petroleum Academy
Key Benefits
At the end of this 4-day course, the
participants will :
 have an understanding of the pipeline
structural analysis and design
 gain a practical understanding of pipeline
materials and corrosion problems and
protection
WHO SHOULD ATTEND
The course is intended for engineers, inspectors
and managers responsible for the design,
integrity, inspection, maintenance and repair of
pipelines
INTRODUCTION
 The course will provide a complete and up-to-date overview of the area of offshore pipeline engineering taking
participants through the pre-design phase, design, construction, installation, operation and maintenance
COURSE CONTENTS
 DAY 1
- Introduction to Offshore Engineering
- Design Overview : Introduction to
Offshore Pipeline Construction
- Route Selection
- Shore Approaches
- Structural Design of Pipelines
- On-Bottom Pipeline Stability
- Hydraulics
 DAY 2
- Pipeline Materials & Metallurgy
- Increasing Corrosion Resistance
- Corrosion and its Prevention
- External Corrosion Protection with Coatings
- Cathodic Protection Systems & Design
- Design Exercise 1
 DAY 3
- Design Exercise 2
- Design Exercise 3
- Bundles & Pipe-in-Pipe
- Trenching and Burial
- Spans
- Pipelaying
- Welding
- Insulation
 DAY 4
- Risk and Pipeline Design
- Development and application of Pipeline Codes
- Pipeline Monitoring & Inspection
- New Technology in Deep Water Developments
- Upheaval & Lateral Buckling
- Pipeline Failures & Repair
- Precommisioning of New Pipelines
COURSE FACILITATORS
Muhamad Hazlalin
He has 12 years working experience in the field of design,
procurement and installation of offshore and onshore oil and gas
pipelines in Malaysia, Sudan, Vietnam, Myanmar, Thailand,
Indonesia, Brunei and Abu Dhabi. He has worked for various
design consultants, offshore installation contractors and even
operator i.e ExxonMobil.
Key design experience includes participation in basic, conceptual
and detailed pipeline design projects for both onshore and
offshore pipelines.
Experience in integrity assessment of pipelines were obtained
during involvement in EMEPMI’s low, medium and high risk
studies on all existing EMEPMI pipelines and risers offshore
Terengganu.
Also involved in the procurement of line pipes, bends, flanges,
pipeline and pipe fittings for EMEPMI offshore pipeline project.
Offshore experience includes installation of pipelines and risers
for PCSB’s Dulang and ANGSI Field Development Project on
board Laybarges D B26 a and Kuroshio 1. Also involved in
pipeline route survey on board TLGH & Racal Survey Vessel for
Petronas and EMEPMI projects.
||Appproved Training Provider by the Ministry of
Human Resource (Reg. No 045) ||
Assoc. Prof. Dr. Nordin Yahaya
Assoc. Prof. Dr. Nordin Yahaya is currently the Marketing
+ International Student Manager, School of Postgraduate
Studies, Universiti Teknologi Malaysia.
Dr. Nordin
graduated with BE (Hons) in Civil Engineering from
Salford University (1988), MSc. In Offshore Engineering
from Cranfield University (1992) and PhD in Civil and
Offshore Engineering from Heriot – Watt University,
United Kingdom (1999). In 2000, he was awarded Young
Graduates and Scientists Award by Volkswagen
Foundation, Germany. He is currently doing his research
on Pipeline Assessment and Structural Reliability
sponsored by UTM and Federal Government Grants. He
has presented many papers at international and national
Conference in these areas of expertise.
(Fee is inclusive of lunch, refreshments and course materials)
Course Fee
Staff from more than 300 local and overseas companies have
attended our life-long learning programmes.
Local Participant (RM)
International Participant (USD)
Some of these companies are :
PETRONAS, SHELL, BP, SAUDI ARABIA BASIC IND. CORP.
(SABIC), QATAR LNG, ALMARAI (SAUDI ARABIA), IDEMITSU,
EASTMAN CHEMICALS, BASF PETRONAS, KUWAIT INSTITUTE
for SCIENTIFIC RESEARCH,SUDAN REFINERY, YOZAI etc.
International Participants
 By Direct Transfer/Bank Draft:
CEPP Bank details: Bumiputra Commerce Bank Berhad
Universiti Teknologi Malaysia
81310 UTM Skudai, Johor, Malaysia
 Account No : 0118-0004178-05-7
 Please instruct your bank to remit us the full amount, net
of bank charges
2550
2350
2250
FUNDAMENTALS OF PIPELINE ENGINEERING
Method of Payments
 By cheque / Bank draft which are made payable to
PHYTO BIZNET SDN BHD
2 or more
REPLY FORM
Please kindly complete and return the reply form together with :
Local Participants
Single
UTM City
2 – 6 January 2006
Campus, Kuala Lumpur, MALAYSIA
YES ! I would like to register the following participants
Name 1
_____________________________________________
Job Title
_____________________________________________
Name 2
_____________________________________________
Job Title
_____________________________________________
COMPANY INFORMATION
Company _____________________________________________
Cancellation & Substitutions
_____________________________________________
A full refund will be promptly made for all written cancellations 2 weeks
before the meeting. 50% refund will be made for written cancellations
received 7 days before the meeting. A substitute may be made at any
time.
Address
Note
a) The organiser has the right to make any amendments that they deem
to be in the best interest of the course and to cancel the course if
insufficient registrations are received a week before course
commencements date .
B) CERTIFICATE OF ATTENDANCE will be awarded at the end of the
course.
Town
_____________________________________________
State
_____________________________________________
Tel
Fax
_____________________________________________
Credit Transfer
This module carries equivalent credit for qualified engineers or scientists
who wish to register under MSc. In Process Plant Management Programme.
Terms
and
conditions
apply.
Contact Rohaizan at 07-5531559 or [email protected] for further
details
ENQUIRIES
_____________________________________________
AUTHORISED Signatory (*This registration is invalid without
signature form an authorised officer)
_____________________________________________
Name
Job Title
_____________________________________________
Tel
Fax
_____________________________________________
CHEMICAL ENGINEERING PILOT PLANT, UNIVERSITI TEKNOLOGI MALAYSIA
MAIN OFFICE
81310 UTM Skudai, Johor
Tel : +607-5531565 Fax : +607 - 5569706
Attn: Mrs Zulia
E-mail : [email protected]
http://www.cepp.utm.my
BRANCH OFFICE
Jalan Semarak, 54100 Kuala Lumpur
Tel : +603-2615 4358 / 2615 4406 Fax : +603-26937921
Attn: Mrs Nik Norhayati E-mail : [email protected]