Transcript Introduction to Hazardous Waste
Hazardous Waste Management Introduction
Topics
Historical Hazardous Waste Tragedies – Love Canal, NY, USA – Minimata Disease, Minimata Bay, Japan – Bhopal Gas Tragedy, Bhopal, India Waste Regulations What is Hazardous Waste Characteristics of Hazardous Waste List of industries generating hazardous waste
Love Canal Tragedy
Love Canal: The most dangerous spot in America. Except that it never was
.
1978 – Love Canal Dumping of municipal and industrial chemicals Main contaminant was benzene Birth defects, Leukemia, http://www.epa.gov/histor y/topics/lovecanal/01.htm
Sept 30, 2004, Love Canal released from Superfund Site by EPA
Minimata Tragedy
Dumping mercury into sea water 1932-1968 Minimata Disease http://www.america
n.edu/TED/MINAMA TA.HTM
Bhopal Gas Tragedy, Bhopal, India
December 1984 Union Carbide Pesticide plant Methyl Isocynate complete blindness, gastrointestinal disorders, impaired immune systems,
US Environmental Legislative Process Overview
Federal House or Senate Bill Federal Act Federal Regulations Federal Rules or Guidelines State Bill State Act State Rules or Guidelines Regional or Local Ordinance Local Regulations Local Rules or Guidelines
Resource Conservation and Recovery Act
– Goals • To protect human health and the environment from the potential hazards of waste disposal • To conserve energy and natural resources • To reduce the amount of waste generated • To ensure that wastes are managed in an environmentally sound manner.
Subtitle C and D
Subtitle C – Hazardous Waste Management – Establishes a federal program to manage hazardous wastes from cradle to grave to ensure that hazardous waste is handled in a manner that protects human health and the environment. Subtitle D – Solid Waste Management – Focuses on state and local governments as the primary planning, regulating, and implementing entities for the management of nonhazardous solid waste
A waste is “a discarded material including solid, liquid, semisolid (sludge) or contained gaseous material.” May 19, 1980 Federal Register.
Recycled Materials
Some materials are not solid wastes when recycled, therefore not hazardous wastes, others are wastes, but subject to less-stringent regulatory control
Excluded Wastes
Exclusions from the definition of solid waste (21) Exclusions from the definition of hazardous waste (17) Exclusions for waste generated in raw material, product storage, or manufacturing units Exclusions for laboratory samples and waste treatability studies Exclusions for dredged material regulated under the Marine Protection Research and Sanctuaries Act or the Clean Water Act
Characteristic Hazardous Waste
Not excluded Exhibits a hazardous characteristic
Characteristics of Hazardous Waste
Ignitibility: » Can create fire under certain conditions » Spontaneously combustible or flash point less than 60oC » E.g. Waste Oils, Used Solvents
Characteristics of Hazardous Waste
Corrosivity: » Usually pH less than or equal to 2 or greater than or equal to 12.5
» Very strong acids or bases » E.g. Battery Acids
Characteristics of Hazardous Waste
Reactivity: – Unstable under normal conditions (white phosphorus).
– May be explosive or release toxic fumes – Reacts violently with water (sulfuric acid).
– Forms potentially explosive mixtures with water or generates gases when mixed with water (sodium).
– Generates toxic gases when exposed to corrosive chemicals (cyanide, sulfide).
– Can explode at standard temp. & pressure – Forbidden explosive found in 49 CFR 173.51, 173.53 or 173.88 (detonators, fireworks, munitions
Characteristics of Hazardous Waste
Toxicity: » Harmful or fatal when ingested or absorbed » E.g Mercury, Lead, Benzene
Toxicity Characteristic Leaching Procedure
Toxicity (D004-D043)
NO.
CONTAMINANT
D004 Arsenic D005 Barium D018 Benzene D006 Cadmium D019 Carbon tetrachloride D020 Clordane D021 Chlorobenzene D022 Chloroform D007 Chromium D023 o-Cresol D024 m-Cresol D025 p-Cresol D026 Cresol D016 2, 4-D D027 1, 4-Dichlorobenzene D028 1, 2-Dichloroethane D029 1,1 Dichloroethylene D030 2, 4-Dinitotoluene D012 Endrin D031 Heptachlor
CAS NO.
7440-38-2 5
REGULATORY LEVEL (Mg/L)
7440-39-3 100 71-43-2 0.5
7440-43-9 1 56-23-5 57-74-9 0.5
0.03
108-90-7 100 67-66-3 6 7440-47-3 5 95-48-74 200 108-39-44 200 106-44-54 200 4 94-75-7 106-46-7 7.5
107-06-2 0.5
75-35-4 200 10 0.7
121-14-23 0.13
72-20-8 0.02
76-44-8 0.008
NO.
CONTAMINANT
D032 Hexachlorobenzene D033 Hexachlorobutadiene D034 Hexachloroethane D008 Lead D013 Lindane D009 Mercury D014 Methoxychlor D035 Methyl ethyl ketone D036 Nitrobenzene D037 Pentrachlorophenol D038 Pyridine D010 Selenium D011 Silver D039 Tetrachloroethylene D015 Toxaphene D040 Trichloroethylene D041 2, 4, 5-Trichlorophenol D042 2, 4, 6-Trichlorophenol D017 2, 4, 5-TP (Silvex) D043 Vinyl Chloride
CAS NO.
REGULATORY LEVEL (Mg/L)
118-74-1 0.13
87-68-3 67-72-1 0.5
3 7439-92-1 5 58-89-9 0.4
7439-97-6 0.2
72-43-5 10 78-93-3 98-95-3 200 2 87-86-5 100 110-86-13 5 7782-49-2 1 7440-22-4 5 127-18-4 0.7
8001-35-2 0.5
79-01-6 0.5
95-95-4 400 88-06-2 93-72-1 75-01-4 2 1 0.2
Is It Listed Waste?
When determining if a waste is “listed”: Sources of potentially listed contaminant?
What process generated the chemical?
F Waste: Generic process using specific solvents.
K Waste: Specific industry process.
P & U Waste: Unused chemical w/sole active ingredient.
Toluene, MEK, Acetone
Typical Industries Generating Hazardous Waste
Aerospace Automobile Batteries Electronic component manufacturing Electroplating Inorganic Chemicals Inorganic pigments Iron & Steel Leather tanning & Finishing Metal smelting & Finishing Organic Chemicals Paints & Coating Perfumes & Cosmetics Pesticides & herbicides Petroleum Refining Pharmaceuticals Photographic Equipment & Supplies Printing Pulp & Paper mills Ship building Textile Mills Wood preservation and processing
Mixture Rule
The mixture rule is intended to ensure that mixtures of listed wastes with nonhazardous solid wastes are regulated in a manner that minimizes threats to human health and the environment. Even if a small vial of listed waste is mixed with a large quantity of nonhazardous waste, the resulting mixture bears the same waste code and regulatory status as the original listed component of the mixture, unless the generator obtains a delisting. A mixture involving characteristic wastes is hazardous only if the mixture itself exhibits a characteristic
Derived-From Rule
Any residue from the treatment, storage or disposal of a listed waste is till a hazardous waste Unless the waste is derived from a characteristic waste and does not exhibita characteristic Or unless the waste is recycled to make new products
Universal Waste
Wastes that do meet the regulatory definition of hazardous waste, but are managed under special, tailored regulations. These wastes include: – batteries – pesticides – lamps/fluorescent bulbs – mercury-containing equipment/thermostats
Generator Status
Generator Status
Conditionally Exempt Small Quantity Generator (CESQG).
Small Quantity Generator (SQG).
Large Quantity Generator (LQG).
Determined by how much you generate in a
calendar month
.
NOT AVERAGED
Large Quantity Generator (LQG)
Generates 1000 kg (2200 lb) of HW in a calendar month. Generates 1 kg (2.2 lb) of acutely toxic HW waste in a calendar month.
100 kg = approximately 1/2 - 55 gal drum.
LQG
Must obtain EPA ID Number. Must use manifest system for shipping HW.
Must keep records for three years - recommend forever. Must label & date HW containers and keep closed. Must perform and document weekly inspections.
Must have a contingency plan.
Must notify local authorities.
Must train personnel to handle HW properly.
Annually review & document all training.
Must meet satellite accumulation requirements.
No quantity limitation at any time.
Must never store HW > 90 days.
Biennial Report (Jack Griffith 850-245-8748).
Small Quantity Generators
Conditionally Exempt SQG
2005 US Hazardous Waste Data (most recenlty available)
Tons Generated: 38 million Number of Generators: 16191 (14984 Large Quantity Generators)
Recordkeeping
Paint Waste Hazardous Waste Records Used Oil Waste Antifreeze Billing Parts On Order Used Oil Filters Parts Washer Returned Checks
Manifests & Receipts
Complete and retain copies for 3 years.
Recommend keeping forever.
Keep copies on site - NOT at main office.
Keep them organized.
Know what your signing!!! It’s a legal document!
Attach copy returned from disposal facility to copy left by transporter.
File an exception report if return copy of manifest is not received within 45 days. Investigate after 35 days.
No contractual agreement exemption.
Uniform Manifest
EPA ID #.
Generators name.
Transporters name.
DOT Description.
Generator, transporter and TSD facility signature.