Transcript BCS Presentation Template White Background

MDTVISION, Partner of your PLM transformation
Logo
PRELUDE V5 Inspect :
3D metrology integrated in the V5 environment
Place, Date
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
3D metrology integrated
in the V5 environment
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
MDTVISION launches PRELUDE V5 Inspect
 After 12 months development under CAAV5
of DASSAULT Systèmes, MDTVISION known
as Inspection leader launches PRELUDE V5
Inspect a metrology workbench integrated in
CATIA V5.
- Part-program creation on CATIA native data
- Homogeneous user interface V5 environment
- On-line + Off-line solution
- Independence among measurement hardware
manufacturers : 14 direct drivers including
universal I++ DME client.
3
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect : A complete solution
 ONLINE programming (auto-teach mode)
 Connection to various measurement
systems & accessories
 Geometrical & surfacic measurement
(ISO 1101 GPS tolerancing)
 Report output for analysis
 OFFLINE programming
 Non contact measurement (creation &
post-computation of
point clouds)
4
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect the answer to various needs
 Manual measurement in « investigation »
mode by point surface projection with
automated geometry nominal features
extracting from CAD during
measurement process
 Assistance in tuning metrology fixtures &
complex assembly setup

Serial parts inspection in DCC mode

Statistical Process Control (SPC) for tuning
manufacturing process
5
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect : A modular solution
3 basic packages :
On-Line
Off-line +
On-Line
Off-line
5 Options :
DCC auto
Rotary table
Cloud Inspect
Auto-change
CMM error mapp
14 Drivers : (+ standards drivers)
6
FARO Tracker
API2 Tracker
API3 Tracker
FARO arm
CIMCORE arm
ROMER arm
METRONOR
ACTICM
METRIS laser
KREON laser
FARO laser
I++ DME
CMM ZEISS
ME5007 Controller
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect : a perfect integration in CATIA V5
 User interface matching with CATIA V5 concepts
 Working on native CATIA V4/V5 data
 Use of standard interfaces of CATIA V5
- Iges, STEP, PRO/E, UG, Solidworks, …
 PRELUDE V5 Inspect integrated under a new V5 workbench
 Single switch available between design (Part Design), Digital Mockup (DMU),
Functional Tolerancing & Annotations (FT&A) & PRELUDE V5 Inspect
 Easy license management & floating access to common server available between
CATIA V5 et PRELUDE V5 Inspect
 Complete integration in CATIA V5 PPR
(Product, Process, Resources)
 Visualization of measurement tasks in the tree
to facilitate the user interface
7
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: An opened solution
Tracked stylus
Laser trackers
Manual/DCC CMM’s
Laser Scanners
Portable arms
Universal I++ DME driver
8
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
Basic packages
3 basic packages :
On-Line
Off-line
Off-line +
On-Line
5 Options :
DCC auto
Rotary table
Cloud Inspect
Auto-change
CMM error mapp
14 Drivers : (+ standards drivers)
FARO Tracker
API2 Tracker
API3 Tracker
FARO arm
CIMCORE arm
ROMER arm
METRONOR
ACTICM
METRIS laser
KREON laser
FARO laser
I++ DME
CMM ZEISS
ME5007 Controller
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect On-Line
 On-line part-program creation on CAD file
 Geometry features measurements
 Free-form surfaces & curves measurement
 Investigation mode measurement by instantaneous
projection
(surfaces & each geometry feature)
 Powerful alignment possibilities (isostatic or
hyperstatic by bestfit under individual
constraints…)
10
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect On-Line : Reports output
 Automated reporting output to facilitate
analysis (EXCEL, JPEG,…) :
- Automatic Inserting of graphic views associated
to tolerance features
- Reports customization via MS Excel macros,
templates,…
- Shading render reporting with
automatic stickers layout
views
- Graphic Print out layout
customizable
11
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect Off-Line
 CMM’s workcell devices configuration (Probe
heads, probes, auto-change,...)
 Part setup & alignment according to probe
head orientation on CMM
 Inter-action if alignment already measured
 Paths generating (geometry, surfaces &
curves, paths editor assistance…)
 Simulation & display of collisions
 Instantaneous Switch OFFLINE/ONLINE
(path tuning on CMM updating OFFLINE)
12
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
Options
3 basic packages :
On-Line
Off-line
Off-line +
On-Line
5 Options :
DCC auto
Rotary table
Cloud Inspect
Auto-change
CMM error mapp
14 Drivers : (+ standards drivers)
FARO Tracker
API2 Tracker
API3 Tracker
FARO arm
CIMCORE arm
ROMER arm
METRONOR
ACTICM
METRIS laser
KREON laser
FARO laser
I++ DME
CMM ZEISS
ME5007 Controller
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: DCC option
 Measurement path creation in auto-teach mode (CMM’s
Joystick)
 Measurement path creation on CAD (surface points, curve
points, section features).
 Motorized probe heads driving (PH9, PH10, RDS…)
 Semi-automatic calibration or automatic calibration on
multi-calibration spheres
 Twin CMM’s driving
 Path generating assistance geometry features (planes,
lines, circles,…)
 Editing, step by step modes, to adjust the final path …
 Graphic simulation of paths before running it on CMM
 Serial part measurement & patterns
 Operator level part-programs to put Cmm’s in « selfservice » mode
14
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: Cloud Inspect option

Inspection on point cloud files digitized by various scanner
technologies

Driving the digitizing process (calibration, scanning paths,
density,…) mixing Renishaw contact probe & scanner

Complete 3D Metrology in one single part-program on
geometric & free form surface features (GD&T) with
automatic tracability of point cloud files


Comparison point cloud/CAD or point cloud / point cloud
Color mapping output, dimensional & free-form surface
deviations

Working Methodologies :
-

15
3D Metrology competence center
Digitizing then comparison with CAD
Comparison between various points clouds
Auto-teaching measurement automated
Serial parts measurement with statistic process
control (SPC)
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: Auto Change Option
 Auto-change racks driving ACR1, MCR20,
SCR200, + other brands via I++DME,…
 Probe matrix defining probe N° into the
matching rack N°
 Calibration management & path if without
I++DME
 Safety zone management between probe &
auto-change rack while measuring parts.
16
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: CMM’s Error mapping Option
 CMM’s geometry inaccuracy decreasing
through software opened error mapping.
 No protected utility software required
 User manual available to help any
calibration services company entering his
matrix after laser interferometer & gauge
checking.
 Template Read & write File given
 Measurement check tool with or without
software compensation to evaluate the
error mapping impact.
17
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: Rotary table Option
 Rotary table driving types:
- DCC
- Manual with hardware link (RS232,…)
- Manual without hardware link
- Manual indexed
- Automatic indexed
 ONLINE: paths created in Auto-teach mode
 OFFLINE: creation & simulation of paths in
CAD interface
18
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
Drivers
3 basic packages :
On-Line
Off-line
Off-line +
On-Line
5 Options :
DCC auto
Rotary table
Cloud Inspect
Auto-change
CMM error mapp
14 Drivers : (+ standards drivers)
FARO Tracker
API2 Tracker
API3 Tracker
FARO arm
CIMCORE arm
ROMER arm
METRONOR
ACTICM
METRIS laser
KREON laser
FARO laser
I++ DME
CMM ZEISS
ME5007 Controller
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: ACTICM Driver
 Manual measurement in On-line mode with
tracked stylus
 Investigation measurement
 « Leapfrog » alignment on any kind of
feature after setup changing (positioning of
camera or measured part)
 Measurement in guidance mode with probe
real time display & dynamic auto-zoom on
target point with approach vumeter displayer
 Automatic section measurement via
crossing plane
20
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: METRONOR driver
 Driving 3 METRONOR camera types
 Investigation measurement with various styli sets
 Wifi communication between stylus & PC
 Big volume parts inspection
 « Leapfrog » alignment on any kind of feature after
camera or measured part setup change
 Sections & border shapes measurement
21
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: Driver Laser Tracker API 2
 Manual measurement in On-line mode with
tracked mirrors
 Investigation Measurement
 « Leapfrog » alignment on any kind of
feature after tracker or measured part setup
change
 Guided measurement mode with mirror
target real time display & dynamic autozoom on target point with approach tuning
displayer
 Automatic section measurement via
crossing plane
22
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: Driver Laser Tracker API 3
 Manual measurement in On-line mode with tracked
mirrors
 Investigation Measurement
 « Leapfrog » alignment on any kind of feature after
tracker or measured part setup change
 Guided measurement mode with mirror target real
time display & dynamic auto-zoom on target point
with approach tuning displayer
 Automatic section measurement via crossing
plane
 DCC measurement (automatic re-measurement of
targets)
 « Intelliprobe » management
23
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: Driver Laser Tracker FARO
 Manual measurement in On-line mode with tracked
mirrors
 Investigation measurement mode
 « Leapfrog » alignment on any kind of feature after
tracker or measured part setup change
 Guided measurement mode with mirror target real time
display & dynamic auto-zoom on target point with
approach tuning displayer
 Automatic section measurement via crossing plane
 DCC measurement (automatic re-measurement of
targets)
 Tracker functionalities management (auto target search,
temperature compensation,…)
24
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: Driver MMT Zeiss
 ZEISS CMM’s driving via CMM-OS
communication protocol (developed by
ZEISS)
 Calibration process managed by CMM-OS as
error mapping compensation preserving
original CMM’s accuracy
 Driving manual Cmm’s (horizontal arms) &
DCC
 RDS & DSE Probe heads management
25
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: ME5007 DCC controler driver
 Metrologic Group ME5007 Controller driver
 Driving horizontal arm Cmm’s & bridge
machines
 Motorized probe heads management
included
26
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: METRIS Laser scanner driver
 Driving Metris LC50 & XC50 on Renishaw UCC
controllers or others
 Automated calibration process of PH10 angular
positions with video settings (Laser power,
integration time & noise filtering,..)
 DCC laser digitizing
 Contact probe management & scanner in same
part-program
 Post-computation on geometrical & surfacic
features in point cloud
 Color mapping comparison
point cloud/CAD
 Part program can be used on another CMM
with contact probe
27
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: KREON Laser scanner driver
 Driving Zephyr KZ25,KZ50 & KZ100 scanners on
Renishaw UCC controllers or others.
 Calibration process of PH10 angular positions
with video settings (Laser power, integration time
& noise filtering,..)
 DCC laser digitizing storing each video settings
into each path
 Contact probe management & scanner in same
part-program
 Post-computation on geometrical & surfacic
features in point cloud
 Color mapping comparison point cloud/CAD
 Part program can be used on another CMM
with contact probe
28
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: FARO ScanArm driver
 Integration of ScanArm FARO laser scanner
SDK
 CCD settings, probe + laser scanner
calibration, automatic probe detection
 Scanning line display to help completing the
point cloud.
 Complete post computation on geometrical
& surfacic features into point cloud or
coming from touch hard probe
 Color mapping comparison point
cloud/CAD
 Complete report output
29
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: CIMCORE Arm driver
 Driving old System 6 3000i/Stinger & new
generation arms « Infinite »
 Investigation measurement with « hard probe » or
Renishaw TP
 Automatic probe detection
 « Leapfrog » alignment on any kind of feature
after setup changing (re-positioning of arm or
measured part)
 Guided measurement mode with probe real time
display & dynamic auto-zoom on target point with
approach tuning displayer
 Automatic section measurement via crossing
plane
 Shrink factor available in CAD coordinate system
30
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: FARO Arm driver
 Driving old Silver/Gold & new generation arms
Platinum, Titanium
 Investigation measurement with « hard probe »
or Renishaw TP
 « Leapfrog » alignment on any kind of feature
after setup changing (re-positioning of arm or
measured part)
 Guided measurement mode with probe real
time display & dynamic auto-zoom on target
point with approach tuning displayer
 Automatic section measurement via crossing
plane
 Shrink factor available in CAD coordinate
system
31
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: ROMER Arm driver
 Driving old System 6, LX series & new generation
arms « Sigma » via Ethernet link
 Investigation measurement with « hard probe » or
Renishaw TP
 Automatic probe detection
 « Leapfrog » alignment on any kind of feature
after setup changing (re-positioning of arm or
measured part)
 Guided measurement mode with probe real time
display & dynamic auto-zoom on target point with
approach tuning displayer
 Automatic section measurement via crossing
plane
 Shrink factor available in CAD coordinate system
32
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect: Universal I++ DME driver (Client side)
 Universal I++DME communication protocol
 Free of charge on RENISHAW UCC controller
 Benefits: Calibration management assumed
by CMM’s manufacturer’s I++DME server like
Cmm’s error mapping preserving original
Cmm’s accuracy
 Driving all Cmm’s manufacturers
« proprietary » accessories (Continuous
scanning heads like VAST (Zeiss), Renishaw
SP80, SP600, SP25 etc,…)
 Perennity & software harmonization ensured
33
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect : Hardware pre-requisite
 Hardware pre-requisite:
- According to the developpement platform used & pre-requisite of DELMIA used
for product, PRELUDE V5 Inspect has got the same than CATIA V5. The whole
configurations validated by DASSAULT Systèmes are available on their web site :
http://www.3ds.com/fr/support/workstations-peripherals/windows/certified-workstations-list/
Example of suggested
configuration :
34
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
PRELUDE V5 Inspect : A large distribution network
 PRELUDE V5 Inspect is distributed worldwide through following
companies :
35
3D Metrology competence center
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
’
Ils nous font confiance …
•AQS (base POLI France)
• AMP ECTM
• APO MBPM
• ARO
• Atlancim
• Automotive Europe Prototype
•Benteler Automotive
•Bolton Plastic
•Bombardier (transport & produit récréatifs)
• Bourbon/Fabi Automobile
• C.E.A./D.A.M.
• CERTA
•CINI SA Tomblaine
• C.M.H.
• CPRO/CPM
•Centre de Ressources Techniques de Morlaix
•Dassault Aviation (Biard & Martignas)
• DBM Reflex
• D.G.A. (A.I.A.)
• DSO DI SANTE
• TOOLCIM Duarte Groupe
• Ecole Centrale de Lille
• ECM Hivet
• Education nationale (Tous lycées/IUT)
• E.N.S. CACHAN
• ESTANFOR
36
• Ficocipa
• Gates
• Gaz De France
• General Electric Power Systems (UK)
GE Energy Products Belfort
• GIAT INDUSTRIES
• GOM france
• Groebli
• Hutchinson
• Hyundai Design Center (Korea)
• I.G.A. (IRAUSA france)
• IMAQS (Distribution in Belgium)
• Inergy Automotive System
Key Plastic International
• Kréon technologies
• Krupp Mavilor
• Laroche SA
• M3D (Distribution MMT MORA en France)
• M3M
• Metrolec
• Mitutoyo (Développement Logiciel OFF-LINE
CADPAK Win)
MARKIV
• New Holland
• Oxford Automotive (Aubry, Douai, ECRIM...)
• Paulstra
3D Metrology competence center
•Phillips (France/Belgique)
•Pixley Richards
•Pont à Mousson
•SAFE ASCOFORGE
•Schligler SA
•SEH
•Sermati
•Seroma
•Setforges
•Shanghai Visteon Yanfeng Automotive + Clutch
Factory (China)
•Sodev
§Stévenin Nollevaux
§Stiga (Suède)
•TEKSID Group Fonderies Du
Poitou/S.B.F.M./F.A.C.
•T.I.M. (Carwall Group)
•Thyssen Krupp (Sofedit,TKA Tallent Chassis…)
•TRW France
•Valeo
•Unitools (République Tchèque)
•Zeiss ("Virtual-Cmm" interface entre Delmia &
Umess)
•Valmold
•Waeles Industries (Luchard)
•Wagon Automotive
•Wimetal (groupe Tenneco)
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
MDTVISION : 28 years experience in PLM & industry
France :
 SAS, capital : 3 353 K€
 400+ employees
 Certified ISO 9001
 Regional proximity
Minsk
Hamburg
MDTVISION Les Ulis
Paris
Nantes
Munchen
Strasbourg
Vienna
Zurich
Allemagne :
Lyon
 130 employees
 Certified ISO 9001
www.mdtvision.com
 Regional proximity
Toulouse
Aix en Provence
www.mdtvision.com
28 years developement in PLM solutions & services
Structure Offshore MINSK
 40+ employees
 Owned at 100%, since 1993
 Fully Integrated to projects
37
3D Metrology competence center
1979 : Creation of DATAVISION : development & sales of EUCLID, 3D Solid
CAD/CAM modeler
1993 : EUCLID 3 launch
1998 : Signature of a partnership agreement with IBM & Dassault Systèmes
for CATIA, ENOVIA, SMARTEAM distribution.
EADS Matra Datavision becomes services provider in PLM
2003 : IBM acquires EADS Matra Datavision which becomes MDTVISION
2006 : MDTVISION becomes CAA Partner of DASSAULT Systèmes for
3D metrology solutions
2007 : PRELUDE V5 Inspect launch
© MDTVISION 2007
MDTVISION, Partner of your PLM transformation
Visit our Web site :
MDTVISION, an IBM Company
Your contact :
http://www.mdtvision.com/en/offre_metrologie_3D.php
3D Metrology competence center
Yannick JOUAULT
+33 6 85 04 20 99
[email protected]
© MDTVISION 2007