School Laboratory Chemical Hygiene & Safety Plan
Download
Report
Transcript School Laboratory Chemical Hygiene & Safety Plan
SCHOOL LABORATORY
CHEMICAL HYGIENE
&
SAFETY PLAN
(CHSP)
2014
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
1
CHEMICAL HYGIENE AND SAFETY
PLAN(CHSP) REQUIREMENTS
• Requires to establish a written CHSP plan stating policies,
procedures and responsibilities for ensuring the safety of the
LAUSD educational community from adverse health and safety
hazards associated with exposure to potentially hazardous
chemicals and must be readily available to all staff members
working with hazardous chemicals. This is to protect employees
who work in laboratories from health hazards associated with
hazardous chemicals.
• The plan is developed in accordance to California Code of
Regulations (CCR), Title 8, Section 5191,Occupational Exposure
to Hazardous Chemicals in Laboratories, Appendix A - National
Research Council , California Education Code Sections 4934049341 Title 8, CCR, Section 5194, Hazard Communication
Standard
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
2
REQUIRED CHSP ELEMENTS
•
•
Develop and implement CHSP in school laboratories
Inform and train affected employees in:
– Hazard recognition and classification
– Standard operating procedure
– Hazard Controls-minimization and control of hazards by
engineering and administrative control
– Proper labeling and disposal of hazardous materials and
wastes
– Recordkeeping requirements of chemical inventories
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
3
CHEMICAL HYGIENE & SAFETY PLAN
ORGANIZATION CHART
Principal/
Site Administrator
Chemical Safety
Coordinator
Office of
Environmental
Health and Safety
Science Teacher
Plant Manager
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
4
RESPONSIBILITIES
Principal/Site Administrator
• Ensure implementation of the Chemical Hygiene & Safety Plan in school laboratories
• Appoint a Chemical Safety Coordinator (CSC) from Certificated Staff to conduct employee
training, establish laboratory safety protocol and hazardous materials management
• Must be familiar with the Program requirements as specified in Reference Guide REF-1563.2
Chemical Safety Coordinators
• Review and approve all CSC submittals to Office of Environmental Health and Safety (OEHS)
to ensure compliance
Chemical Safety Coordinators (CSCs)
• Attend two mandatory training meetings conducted by OEHS on the subject of chemical safety
• Conduct yearly inventory of chemical storage rooms and submit Annual Chemical Inventory
List of hazardous substances at the school site to the OEHS
• Perform monthly inspections chemical/hazardous waste storage areas and arrange for
removal of outdated chemicals
• Submit monthly checklist for safe handling and storage of chemicals to OEHS
• Provide training on the Hazard Communication Standard to all school staff, and on the
Chemical Hygiene and Safety Plan to Science Department Staff.
• Maintain Safety Data Sheets (SDS)
• Maintain required documents and training records
• Assist in responding to emergencies as detailed in Safe School Plan Volume 2-Emergency
Procedures, for a release or threatened release of hazardous materials at or near a school
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
5
RESPONSIBILITIES (CONT.)
Chemical Safety Coordinators (CSCs) and Science Teachers
• Plan and conduct each laboratory operation/activity in accordance with the District’s
CHSP
• Conduct regular chemical hygiene, safety and housekeeping inspections including
routine inspections of emergency equipment (i.e. eyewash/shower stations), maintain
inspection records/logs and instruct students in safe work practices and procedure
Office of Environmental Health and Safety (OEHS)
• Receives/compiles and reviews all the required documents for compliance with the
District’s Reference Guide 1563.2
• Generate annual performance report and distribute to Chemical Safety Coordinators
(CSCs) to each of the Education Service Centers as well as to School Operations
Central office.
• Work with school principals, CSCs, and teachers to help implement the school chemical
hygiene & safety plans
• Provide training to CSCs and staff as to the requirements listed in the Chemical Hygiene
and Safety Plan
• Provide technical assistance to schools and employees on the CHSP
• Maintain a list of Chemical Safety Coordinators in schools and work with the CSCs to
monitor procurement, usage, and disposal of chemicals used in the school laboratory
programs
• Regulate the use of chemicals for general school laboratories
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
6
EMPLOYEE INFORMATION
The goals of the District’s chemical hygiene and safety training program are to
ensure that all individuals at risk are adequately informed of:
•
•
•
•
•
The physical and health hazards associated with chemicals.
The hazardous materials and waste present or generated in the laboratory.
The proper procedures to minimize risk of exposure.
The proper response to spills.
All school staff whose assigned work locations include a laboratory area
shall participate in an ongoing chemical hygiene and safety training
program. This includes custodial and maintenance personnel.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
7
EMPLOYEE TRAINING
•
•
•
•
•
•
•
•
•
The scope of training an employee receives is determined by the scope of work
assignment.
Training for custodians would include procedures for performing necessary cleaning
activities in the presence of laboratory chemicals.
Training will be directed to classes or groups of hazardous chemicals, rather than to
the specific characteristics of many individual chemicals.
General content of the training and information program will include State Chemical
Hygiene and Safety standards, including the contents of Section 5191 of the General
Industry Safety Orders of Title 8, California Code of Regulations.
Location and content of CHSP
Hazards of chemicals, PEL or other exposure limits, TLV, Lethal Dose(LD)50 and
routes of entry
Labeling and storage requirements
Chemical evaluation and authorization
Location and content of Safety Data Sheets for chemicals at the school site
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
8
EMPLOYEE TRAINING (CONT.)
•
•
•
•
•
•
•
Location and proper use of available Personal Protective Equipment.
Signs and symptoms associated with an exposure to hazardous chemicals associated with
the laboratory
Methods to detect the presence or release of hazardous contaminants (e.g., air monitoring).
Proper response and reporting procedures for chemical releases/spills and evacuation.
The training program will be an ongoing process, consisting of an initial orientation for new
employees and annually to the science staff thereafter. The Chemical Safety Coordinator will
document and maintain records of the ongoing training received by employees
To assist science teachers, administrators, and other school staff members understand and
avoid situations in which accidents might occur, the State of California has prepared the
Science Safety Handbook for California Public Schools (*.pdf) CSCs are encouraged to
download and review the handbook.
Science Safety Handbook updates can be viewed in its entirety online. The following are the
updates to the 2012 Edition of the Science Safety Handbook:
-Globally Harmonized System of Classification and Labeling of Chemicals (GHS)
-Revisions to the proper occupant load factor for science labs (from 20 square feet to 50)
-Addition of 2,4-Dinitrophenol to Tables 7.2 and 7.3
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
9
EMPLOYEE TRAINING (CONT.)
Globally Harmonized System (GHS) of Classification and Labeling of
Chemicals is a worldwide initiative to promote standard criteria for
classifying chemicals according to their health, physical and environmental
hazards. It uses pictograms, hazard statements, and the signal words
“Danger” and “Warning” to communicate hazard information on product
labels and safety data sheets in a logical and comprehensive way. The
primary goal of GHS is better protection of human health and the
environment by providing chemical users and handlers with enhanced and
consistent information on chemical hazards.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
10
SAFETY DATA SHEETS (SDS)
• Safety Data Sheets (SDS) received for all laboratory chemicals
should be kept in the Science Chemical Safety Data Sheets binder
and be readily accessible to employees.
• SDS’s are available electronically on the OEHS website accessible
through the LAUSD.net website.
• SDSs are required to be presented in a consistent 16-section
format.
• Provide detailed health and safety information and precautions for
handling, storing and transporting hazardous substances, including
emergency and first aid procedures.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
11
SAFETY DATA SHEETS (SDS)
Format and 16 Sections of the GHS SDS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Section 1: Identification of the substance or mixture and of the supplier. Includes GHS product identifier, recommended use and restrictions
on use, supplier’s details, and emergency phone number.
Section 2: Hazards identification. Includes GHS classification, GHS label elements, and other hazards not resulting in classification or not
covered by GHS.
Section 3: Composition/information on ingredients. Includes information on chemical ingredients, such as chemical identity and concentrations.
Section 4: First aid measures. Includes description of necessary measures, most important symptoms/effects, and indication of immediate
medical attention and special treatment needed.
Section 5: Firefighting measures. Includes suitable extinguishing techniques, specific hazards from fire, and special protective equipment and
precautions for firefighters.
Section 6: Accidental release measures. Includes precautions, protective equipment, emergency procedures, environmental precautions, and
methods for containment and cleanup.
Section 7: Handling and storage. Includes precautions for safe handling, and conditions for safe storage, including any incompatibilities.
Section 8: Exposure controls/personal protection. Includes occupational exposure limits or biological exposure limits, appropriate engineering
controls, and personal protective equipment (PPE).
Section 9: Physical and chemical properties. Includes the chemical’s characteristics (appearance, odor, pH, flash point, vapor pressure, etc.).
Section 10: Stability and reactivity. Includes reactivity, chemical stability, possible hazardous reactions, conditions to avoid, incompatible
materials, and hazardous decomposition products.
Section 11: Toxicological information. Includes routes of exposure, related symptoms, acute and chronic effects, and numerical measures of
toxicity.
Section 12: Ecological information. Includes ecotoxicity, persistence and degradability, bioaccumulative potential, mobility in soil, and other
adverse effects.
Section 13: Disposal considerations. Includes description of waste residues, and information on their safe handling and methods of disposal.
Section 14: Transport information. Includes UN number, UN proper shipping name, transport hazard classes, packing group, environmental
hazards, transport in bulk, and special precautions.
Section 15: Regulatory information. Includes safety, health and environmental regulations specific for the product in question.
Section 16: Other information. Includes information on the preparation and revision of the SDS.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
12
SIGNS/DRAWINGS
Prominent signs/drawings must be clearly posted in all laboratories, and
chemical preparation and chemical storage areas.
Signs/drawings must clearly state the following:
Exits and evacuation routes
• Location of safety showers, eyewash stations, and other safety equipment
• Location of fire extinguishers/blankets and first aid kits.
• Proper identification of used chemical/waste disposal containers
• Floor plan drawings of the laboratory
• Location of equipment, workbenches and storage pattern for all chemicals
stored in the room
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
13
HAZARD RECOGNITION AND
CLASSIFICATION
• Physical Safety Hazards
• Chemical Health Hazards
• Chemical Classes and Their Effects
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
14
PHYSICAL SAFETY HAZARDS
•
•
•
•
•
•
•
Compressed gas – High pressure gas or mixture of gases in a container
Combustible liquid – Pure liquid with a Flash point above 100º F but below
200º F
Explosive –
A chemical that causes a sudden release of pressure,
gas and heat when subjected to sudden shock,
pressure or high temperature
Flammable liquid – Flash point below 100º F
Flammable solid – Liable to cause fire through friction, absorption of
moisture, or spontaneous change
Flammable Aerosol- Flame projection exceeding 18” at full valve opening or
flashback at any degree of valve opening
Flammable GasAt ambient temperature and pressure forms a
flammable mixture with air at a concentration of 13% by
volume or less; or with air greater than 12% by volume
regardless of the lower explosive limit
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
15
PHYSICAL SAFETY HAZARDS (CONT.)
•
Oxidizer-
•
Reactive –
•
Water-reactive –
•
Organic Peroxide-
A chemical that initiates or promotes combustion in
other materials
A chemical that will vigorously polymerize,
decompose, condense, or will become self-reactive
under conditions of shock, pressure or temperature
A chemical that reacts with water to release a gas that
is either flammable or presents a health hazard
Extremely flammable and sensitive to heat, friction,
impact and light as well as to strong oxidizing and
reducing agents
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
16
CHEMICAL HEALTH HAZARDS
• Carcinogen – A chemical that is capable of causing cancer
• Corrosive – A chemical that causes visible destruction of living
tissue by direct chemical action at the site of contact
• Toxic –
A substance with the potential of having the effect of a
poison or something harmful to the body
• Irritant –
A chemical that causes a reversible inflammatory
effect on living tissue, skin or eyes by chemical action
at the site of contact
• Sensitizer – A chemical that causes an allergic reaction in normal
tissue after repeated exposure to the chemical
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
17
CHEMICAL CLASSES AND THEIR EFFECTS
•
•
•
•
•
•
•
•
•
Acids –
Alcohols –
Corrosive to skin and mucous membranes
Induces blindness and central nervous system (CNS)
depressants
Aldehydes and ketones – Irritates and has narcotic effects via inhalation,
absorption and ingestion
Aliphatic –
Central nervous system (CNS) depressants and
asphyxiants. Some are neurotoxins
Alkalies –
Severe tissue burns and bronchial spasms
Asphyxiants –
Reduces the oxygen carrying capacity of the blood
or displaces atmospheric oxygen
Compounds of sulfur, – Corrosive to the skin and destructive to respiratory
phosphorus, nitrogen
tissues
Halogens –
Corrosive and highly irritating to tissues
Metal fumes/vapors Systemic poisoning
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
18
ROUTES OF ENTRY
There are three main routes by which chemical substances
can enter the body:
• Inhalation by breathing dusts, fumes, mists or vapors
• Ingestion by eating or drinking with contaminated hands
or in a contaminated laboratory
• Absorption through the skin or eye by contact with liquid,
dusts, fumes, mists or vapors.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
19
DEFINITIONS
• PEL: Permissible Exposure Limit. The highest concentration of a
chemical that an individual can be exposed to, averaged over the
duration of an 8-hour work shift.
•
TLV: Threshold Limit Value. The highest concentration of a
chemical that an individual can be exposed to at any time during
his/her work shift.
•
LD50: A measure of toxicity involving the use of laboratory animals
to determine the dose of a given chemical at which death will occur
in half of the test population.
•
PPE: Personal Protective Equipment. Examples include respirators
and air purifying cartridges, gloves, chemical splash goggles,
boots/shoe covers, and Tyvek coveralls.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
20
STANDARD OPERATING PROCEDURES
General safe work practices
• Familiarize with the potential hazards of various chemical substances
• Avoid unnecessary exposure to chemicals by any route
• Identify unsafe conditions and action
• Thoroughly wash areas of exposed skin before leaving the laboratory
• Do not eat, drink, smoke , chew gum, or apply of cosmetics in the laboratory
• Do not keep food and drink in the laboratory
• Do not use laboratory glassware or utensils for food or beverages
• Do not allow practical jokes
• Confine long hair and loose clothing
• Avoid wearing open-toed shoes
• Wear protective clothing and goggles
• Do not work alone in the laboratory
• Never leave an experiment unattended
• Do not use mouth suction for piping or starting a siphon
• Never taste, smell or touch chemicals unless such action is approved by the
instructor and conducted in the proper manner
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
21
STANDARD OPERATING PROCEDURES
(CONT.)
Housekeeping
• Work areas must be kept clean and free from obstructions
• Cleanup at the completion of any experiment
• Deposit waste in appropriate receptacles
• Cleanup minor spills. Immediately notify the instructor prior to initiating a cleanup
procedure.
• Do not block access to exits, emergency equipment and controls
Equipment Use
• Safety equipment and supplies are available and functional according to
manufacturer’s guidelines
• Use equipment only for its designated purpose
• When inserting glass tubing observe and follow necessary precautions
• Glass wool and steel wool must be handled carefully to avoid getting splinters in
the skin or eyes
• Table tops must be protected from extreme heat by using non-asbestos
insulation under burners or heated objects
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
22
STANDARD OPERATING PROCEDURES
(CONT.)
Safe Handling and Storage of Chemicals
• All chemicals must be properly, clearly labeled and inventoried
• Store all chemical by compatibility. Keep incompatible chemicals separated
• Only chemicals that are used should be kept in storage
• SDS sheets must be available for all chemicals
• Review the hazards and personal protective equipment required before using any
chemical. Study the precautionary label, SDS and review its contents frequently
before using any chemical product.
• Ensure neutralizing chemicals, spill kit, absorbent and other spill control materials are
readily available.
• Secure compressed gas cylinders upright to the wall, with valve protection caps in
place.
• Flammables must be stored in flammable storage cabinet
• Avoid storing chemicals on the floor , on top of lab benches, out in open, or in shelves
above eye level
• Storage in hoods is not recommended
• Chemicals must be stored in approved, properly labeled cabinets that can be locked
when not being accessed for laboratory use and where chemicals are stored by
compatibility.
• An ABC extinguisher in good working order must be available in chemical
storage/working areas
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
23
STANDARD OPERATING PROCEDURES
(CONT.)
Warning Signs and Labels
• Signs to identify the location of safety showers, eyewash stations, exits, fire
blankets, and fire extinguishers. Extinguishers must be labeled to show the
type of fire for which they are intended.
• Labels on chemical containers must contain information on the hazards
associated with the use of the chemical, identity of the chemical, and name
and address of the chemical manufacturer, importer or supplier.
• Unlabeled bottles of chemicals must not be opened or moved and disposed
of promptly and will require special handling procedures
• Contact the OEHS immediately at (213) 241-3199 for safe disposal.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
24
HAZARD CONTROLS
•
•
•
•
•
•
•
•
•
•
•
Minimize all chemical exposures, general precautions for handling all
laboratory chemicals
General laboratory ventilation
Safe work practices
Engineering controls
Fume hoods
Personal protective equipment -Use appropriate PPE such as aprons,
laboratory coats, laboratory aprons, gloves, goggles, face shields
Administrative controls
Laboratory Storage-Use only those chemicals in quantities whose chemical
concentrations can be controlled by the existing ventilation system
Order should not exceed what is expected to be used in one year
Fire protection and prevention
Accident and Spill Responses
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
25
LABELING AND DISPOSAL
Waste Minimization
• Plan experiments to reduce scale of experiments and limit amount of chemicals
used
• Purchase chemicals only in the amounts needed
Used chemical container labeling
• Leftover reagents and reaction products should be placed in marked containers
at the end of each laboratory session. Broken glass should be placed in its own
marked container.
• Classify used chemicals into the following categories:
Flammable
Organic Acid
Reactive
Base
Water Reactive
Toxic
Air Reactive
Oxidizer
Inorganic Acid
Other
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
26
LABELING AND DISPOSAL
Workplace Labels
• OSHA has not changed the general requirements for workplace labeling.
• Labels must be legible and fade resistant or not easily removed in anyway.
• Employers have the option to create their own workplace labels.
• Employers are not responsible to update labels on shipped containers however, must
re-label items if the labels are removed or defaced.
• Workplace labels can either provide all required information on the original chemical
manufacturer’s label or, the product identifier and words, pictures, symbols or a
combination of these.
• If the employer is aware of newly-identified hazards that are not disclosed on the
label, the employer must ensure that the workers are informed.
• Employers may continue to use rating systems such as National Fire Protection
Association (NFPA) diamonds or HMIS requirements for workplace labels as long as
they are consistent with the requirements of the Hazard Communication Standard
and the employees have immediate access to the specific hazard.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
27
LABELING AND DISPOSAL (CONT.)
Containers shall be labeled with the following information:
• Used-chemical category
• Name of chemical(s) in the container
• Approximate percentage of each chemical (if mixed)
• Date prepared
• Name of teacher or room number
Chemical Waste Disposal
• All hazardous waste containers must be properly labeled with name and
address of school, composition and physical state of the waste, and
accumulation date.
• It is unlawful to store hazardous wastes at school sites for longer than 90 to
arrange for the pickup of hazardous materials and/or wastes.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
28
LABELING AND DISPOSAL (CONT.)
Chemical Waste Disposal
If used chemicals become reclassified as hazardous waste, their containers will
be relabeled as such and segregated into the following classes for disposal
(EPA categories):
• Ignitable: Materials capable of causing fire.
• Corrosive: Aqueous solutions with a pH less than or equal to 2 or greater
than or equal to 12.5.
• Reactive: Substances that are unstable, explosive, water reactive, or
generate toxic gases.
• Toxic: Substances that are harmful to human health such as arsenic,
barium, cadmium, chromium, lead, mercury, selenium, silver.
• Other waste not falling into one of the above classes should be identified by
chemical names.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
29
LABELING AND DISPOSAL(CONT.)
•
•
Labels must be legible, in English, and prominently displayed. Other languages may be displayed in
addition to English. Chemical manufacturers, importers, and distributors who become newly aware of
any significant information regarding the hazards of a chemical must revise the label within six months.
Each pictogram consists of a symbol on a white background framed within a red border and represents a
distinct hazard(s). The pictogram on the label is determined by the chemical hazard classification.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
30
DISPOSAL
•
Disposal Procedures for Hazardous Waste and Universal Waste are
outlined in REF-4149.00
•
Universal wastes, such as fluorescent light tubes, batteries, and cathode
ray tubes, are not allowed to be disposed of in regular trash effective
February 8, 2006. At Schools Universal waste shall be collected in
separate, properly sealed, DOT approved containers, each affixed with a
“universal waste” label and stored in an area designated by the Plant
Manager.
•
To request disposal of universal waste from school sites, complete the
Hazardous Waste Pick-up Request form and e-mail it to OEHS by clicking
on the button labeled “Submit by e-mail.” If you do not have access to an
LAUSD e-mail account, you may fax a copy of the old request form to
OEHS at (213) 241-6816.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
31
DISPOSAL (CONT.)
OEHS will pick up the following universal wastes from school sites:
•
BATTERIES
Silver button batteries, Mercury batteries, Small sealed lead acid batteries (burglar alarm and
emergency light batteries), Rechargeable nickel-cadmium batteries, Carbon-zinc batteries
Alkaline batteries (AAA, AA,C, D batteries), Lithium batteries.
•
MERCURY-CONTAINING ITEMS
Pressure or vacuum gauges that contain mercury, including blood pressure meters, Mercury
thermometers, including fever thermometers , Mercury gas flow regulators, Novelties that contain
mercury or mercury batteries, Mercury switches, Rubber flooring that contains mercury, Dilators
and weighted tubing medical devices that contain mercury, Gauges that contain mercury, Dental
amalgam Mercury thermostats.
•
MISCELLANEOUS ITEMS
Non-empty aerosol cans, High intensity discharge lamps, Fluorescent light bulbs, Sodium vapor
lamps.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
32
DISPOSAL (CONT.)
Fill out this form and fax to OEHS at (213) 241-6816
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
33
DISPOSAL (CONT.)
OR
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
34
DISPOSAL (CONT.)
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
35
SPILLS
• Clean-up minor spills of diluted chemicals, nonvolatile or
toxic using procedures listed on the MSDS
• Wear appropriate protective apparel such as gloves and
aprons
• Evacuate the area if a volatile, flammable, toxic and/or
concentrated material is spilled.
• Notify OEHS at (213) 241-3199 immediately.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
36
RECORDKEEPING
Chemical Inventory Records
• Conduct an inventory of all chemicals stored in each school building
annually
• Inventory information includes the following: chemical name, quantity,
hazard information, and storage location. Computer software may be used
for keeping the inventory, if desired.
• Inventory and chemical order records are to be maintained by the Chemical
Safety Coordinator, Site Administrator, or Science Chairperson, with a copy
sent to OEHS.
• Chemical Hygiene and Safety Training Records
• Annual Chemical Hygiene and Safety Training for Science staff and Hazard
Communication Training for all staff conducted by the Chemical Safety
Coordinator (CSC)
• Document all trainings and maintain all records on site for at least 5 years
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
37
RECORDKEEPING (CONT.)
Medical Examination and Exposure Records
•
•
•
•
•
School science teachers do not regularly handle large quantities of acutely or
chronically toxic materials. Therefore, regular medical surveillance is not required.
In the event of an employee exposure to a hazardous chemical exceeding the
established Permissible Exposure Limit (PEL) or Threshold Limit Values (TLV), or
exhibits signs or symptoms of such exposure, the employee shall have the
opportunity to receive a medical consultation to determine the need for medical
examination.
Medical exams and consultations performed at a reasonable time and location
without the cost to the employee.
The physician will be provided with: identity of the chemical(s) to which the employee
may have been exposed, exposure conditions; and employee's signs and symptoms
of possible exposure.
A record of consultation, tests performed and conclusions will be provided to the
employee and school district. CalOSHA regulations require that records of air
concentration monitoring, exposure assessments, medical consultations, and medical
examinations be maintained for at least 30 years after the employee leaves school
district employment.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
38
CHEMICAL INVENTORY RECORDS
•
An inventory of all chemicals stored in each school building shall be
conducted annually and chemical usage determined.
•
Inventory information shall include the chemical name, quantity,
hazard information, and storage location.
•
Inventory and chemical order records are to be maintained by the
Chemical Safety Coordinator, Site Administrator, or Science
Chairperson, with a copy sent to OEHS.
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
39
“ A commitment to purchase a
chemical is a commitment to
handle and store the chemical
safely and to dispose of the
chemical in an environmentally
acceptable fashion.”
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
40
Chemical Safety
What’s the big deal?
School Laboratory Chemical Hygiene & Safety Plan (CHSP)
Modification Date: 3/15/14
Page
41