Transcript Lysbilde 1

Offshore Testing
Inspection and Certification
ABOUT OTIC AS
Otic AS was established in 1990, and is located on the
Norsea Base in Tananger, Norway.
Our facilities consist of 445 square meters of office space,
and 1100 square meters of indoor workshop and warehouse
areas.
An additional 4000 square meters are operated as outdoor
premises.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
ORGANISASJON
Otic counts a total of 30 employees. We have 5 Competent
Bodies and 9 Approved Inspectors, as for 6 with certification
for Offshore operations and 4 with NDT – Level 2
certification.
The company is certified as a Competent Operation ( by
Sakkyndig Virksomhet AS ), with the following personnel
certified as competent bodies:
Mr. Ernst Austdal , Managing Director
Mr. Tor Inge Olsen , Works manager .
Mr. Oddbjørn Hobberstad , Competent person
Mr. Frode Austdal, Competent person
Mr. Kjell Ove Olafsen, Competent
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
BUSINESS AREAS
Business carried out by OTIC AS is divided into 80 %
offshore related activities, and 20 % onshore related
activities.
Our main business focus is within offshore testing,
inspection and certification of lifting equipment.
In addition we offer of a wide range of equipment for rental;
hoists, clamps, trolleys, fall protection equipment, load cells
and testing equipment etc.
We also supply specified lifting equipment for both sales and
rental.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
OPERASJONER
•Visual test / Certification
•Load test of lifting equipment
•NDT / -Magnetic Particle Inspection
-Penetrant Inspection
-Eddy Current Inspection
•Technical lifting consultancy
•Repair and maintenance
•Reconstruction / new construction
•Rental of a wide range of equipment
•Supply of lifting equipment
•Storage of customers equipment
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
OTHER RELEVANT SERVICES
Otic can supply a full range of lifting equipment, both
loose lifting gear and rigging products as well as
assembled lifting equipment.
We supply high quality equipment, for heavy lifting /
anchor handling operations.
We can offer repairs, modifications and production of
containers, baskets and frames.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
AUTHORISATION FOR SERVICE
Otic AS is an approved competent enterprise in the
following categories :
•S1:G7, G10, RX
•S2: G1, G2, G3, G4, G8, G20 (permanently installed
hydraulic crane)
Certifying of lifting equipment is in accordance to :
•Brukerforskriften 89 / 655 / EEC and 5.5.5
•Maskindirektivet 98 / 37 / EC and 5.2.2
•Norsok Standard R-003 (Juli 2004)
•Lifting Oper. and Lifting Equipment Reg. SI(1998) 2307(LOLER)
•DnV 2.7-1 & DnV 2.7-3
•En12079
Otic AS:
•is registered with Achilles.
•is certified by NS-EN ISO 9001:2008
•Competent Operation (By Sakkyndig Virksomhet)
•Certified for NDT operations by Force Technology
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
EQUIPMENT FOR TESTING AND MAINTENANCE
Otic equipment located on NorSea Base, Tananger:
•Test rig for lifting equipment
•Test gallow for stretch and drop testing
•Drums for tumbling and cleaning of chain slings
•Test bench for tackels
•150 tons stretch bench
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
TEST RIG FOR LIFTING EQUIPMENT
Application of equipment
The rig is constructed with the purpose of testing lifting equipment like containers,
baskets and other open lifting units of all types, tanks, skid mounted equipment and
similar equipment mounted in frames. The rig can also be used for stretch testing of
spreaders and lifting flanges.
Primary measurements and capacity.
The rigs total outside measurements are: Length 16900 mm, Width 4900 mm and
maximum height 7300 mm. Containers up to 20" can be tested with a simulated
weight on the floor. Maximum length of baskets and similar units that can be tested
are approx. 15 meters. Maximum base for units that can be placed in the rig for
testing is: 10100 mm x 3290 mm x 4000 mm (Width x length x height) Units that are
tested can be exposed to a maximum test load of 50 ton.
Brief construction description.
The rig is a steel construction where all loads are absorbed internally in the
construction. Thereby the rig can be placed on the ground without any special
demands on anchoring or foundation The test load is applied through hydraulical
cylinders and suspensions. The load will be as true to nature as possible. It simulates
the load and angle of forces that the unit receives to with normal use.
Registration and documentation of test results.
All test results are stored and documented for the benefit of customer.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
TESTGALLOW FOR STRECH AND DROP TESTING
Application of equipment
The gallow is constructed for testing of smaller containers, baskets and other open lifting
units. The gallow can also be used for stretch testing of spreaders, shackles and other
units with a limited length. The gallow is specially adjusted for carrying out of drop tests in
accordance to DNV ".2.7.1
Major measurement and capacity
The rigs external total height is approx. 5500 mm. The height from the lower edge hook to
mounting surface is 4550 mm. Normally this rig will be used for units that does not exceed
approx 2400 X 4000 mm ( width x length). Units for testing can be exposed to a maximum
test load of 25. ton.
Brief construction description
The rig is constructed as a gallow of steel with a hydraulic stretch cylinder. The test unit is
strapped to the foundation. To stimulate a load in baskets and other open constructions,
extra equipment is used to give a load approximately equal to the exposure the equipment
gets in daily use.
Registration and documentation of test results
The gallow has a reading scale for documentation of test loads.
All test results are stored and are documented for the benefit of the customer.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
TEST DRUM FOR TUMBLING AND CLEANING OF CHAIN SLINGS
Application of equipment.
The test drum is used for tumbling and cleaning of chain slings in
connection with yearly controls and testing. Subsequent to cleaning a
magnetic powder inspection of the sling is carried out in accordance with
the customers demands and specifications. Before being mounted on the
lifting unit the sling is dip-painted in this years colour.
Construction description and capacity.
The drum is a steel construction and powered by a electric motor. The drum
has three separate chambers so that three chain slings can be cleaned at a
time. The sling is cleaned to a purity that makes it possible to do a
magnetic powder inspection and painting after the control.
Registration and documentation
All cleaning, NDT-control and testing of the sling will be registered in our
computer program that monitor all units we are testing and controlling. The
results of testing and controls will be included in our reports to our
customers.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
TEST BENCH FOR TACKELS
Application of equipment.
The test bench for testing of chain tackles, jack tackle and wire tackles. The test
bench is mounted on a frame and can easily be transported.
Capacity.
The test bench is designed for chain tackles from 0 to 15 ton.
The test bench is designed for test loading and testing of overload protection on
chain tackles.
Brief construction description.
The test bench is constructed as a vertical stretch bench where the tackle pulls the
bench together with a requested load.
A manometer is incorporated in order to do a reading of the tested load.
Registration and documentation of test results.
All results are stored and documented for the benefit of customer
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
150 TONS STRECH BENCH
Application of equipment.
The rig is constructed with the purpose of testing of crane hooks, wire and chainstraps and winces. The bench is also constructed for execution of fracture tests on
the same kind of equipment.
Main measurements and capacity
The rigs outside measurements are:
Length 12000 mm, Width 1.450 mm, Largest stretch power 150 ton.
Brief construction description.
The bench is constructed for horizontal strain testing. Maximum strain length as
assembled is 10 meters. The bench have covers for protection of operator in all of
the standard strain length. The straining is being done with hydraulic cylinders.
Strain gauge-sensors measures the applied test load.
Registration and documentation of test results.
All test results are stored and documented for the benefit of our customer.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
DATABASE AND DOCUMENTATON
For our clients we have a complete database of
documentation available on web.
www.otic.no
OTIC AS has developed a Documentation program to secure
in a best possible way it’s clients, as well as it’s own needs
and demands for easy accessible documentation, archive
and project logging.
The system is built on a Windows platform and operated
electronically on web.
Direct scanning of certificates and control cards are
implemented in the system.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspeksjon og Sertifisering
DATABASE OG DOKUMENTASJON
Continues….
Otic operates a system where all hiring products are marked
with a microchip.
When supplied from our stock, all products are electronically
read by a hand-held terminal, and updated information
(control date etc. ) is automatically registered into the clients
document archive.
This system secures that all relevant documentation is
updated and available at once on web for our client.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no
Offshore Testing
Inspection and Certification
CUSTOMER REFERENCE LIST
Talisman Energy Norge AS
• Supplier for Lifting equipment and certification/control of
same
Archer Norge AS (Archerwell)
• Control and Certification of lifting equipment
offshore / onshore and supplies / rental of same.
Halliburton AS
• Certification, Modification and supplies of lifting
equipment.
Aker Solutions AS
• Aker Solutions MMO AS
Frame Agreement for supply and rental of lifting
equipment, and rigging pool.
•
Aker Well Service AS, Frame Agreement for Certification
of Well Service Equipment.
Nordic Crane Stangeland AS,
• Certification of mobile cranes.
Schlumberger Norge AS
• Certification and supply of lifting equipment.
Adress
Location
Phone
Fax
Web
P.O.Box 122
4098 Tananger
Building 44
Norsea Base
+4751692750
+4751692765
www.otic.no