Transcript PowerPoint-presentasjon

Introduce:
CLS
DMX16
16 Channels DMX
Light Mixer
CLS makes the Light
Equipment more compact
Let’s take a look
at the DMX16
a d
M
e in
No
r w
y b
a
y CL
S
First an explanation about the capacity
of the DMX16 mixer.
Group
Group
Group
It has43included
21controls
controls
controlsaDMX
DMX
DMX
channel
channels
channels
channels
17 for13-16.
9-12.
the
1-4.
5-8.
As you kan see it can control 16 channels.
control of a smoke machines as well.
It is 4 groups of faders.
P AUS EF ADE
1 2 3 4
G R P ME M E D IT P R G

G ro u p /Sm o k e k n o b
Me m /Bla c k O u t
Ed it/Ma ste r Fla sh
To explain the functionality of the DMX 16,

61-2V

D MX O U T
CLS 16
DMX
V2

AUX

61-2V

D MX O U T
CLS 16V DMX
2

AUX

61-2V

D MX O U T
CLS 16V DMX
2
This is the CLS DMX16
Compact Light Mixer
Let’s get starting
This is the 4 Faders.
This is the 4 Flashknobs
This is the 4 Function knobs
Group Memory Edit Program
The first you see when you connect
the power is a light in the first led.
It tells you that it is in Mix-Mode.
Mix-Mode
It is for Mixing and Saving Scenes.
The DMX16 has a limit at 4 Scenes Memory.
Mix the lights as you want them
on channel 1-4.
Turn Off Group 1 by holding in the
Grp knob and press Flash knob 1.
Turn On Group 2 by holding in the
Grp knob and press Flash knob 2.
You can see the light in the Led 2.
Mix the lights as you want them
on channel 5-8.
Turn Off Group 2 by holding in the
Grp knob and press Flash knob 2.
Turn On Group 3 by holding in the
Grp knob and press Flash knob 3.
Mix the lights as you want them
on channel 9-12.
Turn Off Group 3 by holding in the
Grp knob and press Flash knob 3.
Turn On Group 4 by holding in the
Grp knob and press Flash knob 4.
Mix the lights as you want them
on channel 13-16.
Save the Scene by holding the Mem
…and press a Flash knob.
Mix the lights as you want them in
the next Scene.
Save the next Scene.
Mix the lights again.
Save the next Scene.
Mix the lights as you want them in
the last Scene.
Save the last Scene.
Press and Release the Prg knob.
This takes you to Program-Mode.
Changes Scenes with Flash knobs.
Changes Scenes with Flash knobs.
Adjust the Cross Fade Time
between the Scenes with Fader 2.
Adjust the Pause length by Fader 1.
More than value 1 starts the Chaser.
Press the EDIT knob in Program
Mode function as Main Flash.
Press the MEM knob in Program
Mode function as Blackout.
Press the GRP knob in Program
Mode function as Smoke on Ch 17.
Press and Release the PRG knob to
leave Program-Mode.
Press and Hold the EDIT knob…
…and press a Flash knob to select a
program for Editing.
Do the Editing of the Saved Scene..
Saved the Scene.
Supportphone: +47 61341438
is
short
for
Liavegen 45, 2953 Beitostølen, NORWAY
Web:www.cls.no – Email: [email protected]
Good Luck !