Transcript INTEGRATED BUILDING DESIGN - International Institute of

INTEGRATED BUILDING
DESIGN
For-----Client :
Infosys Technologies, Hyderabad
Architects/Engineering Consultants :
Sundaram Architects Pvt Ltd.
Bangalore.
Team : Ashwini, Amit, Asawari, Bharath, Debarshi, Milind, Manish
and Suvojit.
General Information about the
Project







Ground plus one storyed structure(two levels).
Principally a cafeteria(Food Court) for the employees of
Infosys Technologies, Hyderabad. Capacity 750 seating.
Also designed for an alternative use as an
auditorium(first floor).
Shape of structure :Umbrella shaped.
Dimensional details: Total height= 20 mts, diameter =
50mts.
Shell structure.
Drawings available(as of now) : Ground Floor, Master
Plan for the Food Court
Various Spaces……ground floor.









Aerobics
Gymnasium
Dormitories
Kitchens
Café
Stores
AHU spaces
Infosys Shop
Area for table tennis and
billiards.

Lockers
 Bank and ATM
Services and major areas of
work targeted.






Architectural Planning and Design.
Design of various basic services like Lighting,
HVAC, Security System, Fire Protection.
Acoustic Design.
Network Design for the entire structure under
discussion.
Structural Work : Shell Structure
Project Management :Planning, Design and
Execution stage of Project.
Our Contribution
Amit, Ashwini, Bharat………
 Work with the structural consultants to
arrive at an efficient and cost effective shell
structure for the Food Court.
 Use existing
Our Contribution
Suvojit, Milind……..
 Arrive at an architectural plan that provides
for maximum utilization of space.
 Also use the IT knowledge and work with
various consultants to design various
services for the space.
 Make new tools if required while working
with the external agencies.
Our Contribution
Debarshi……
 Introduces the concept of automation of
services as required by the client.
 Emphasis is on the acoustics design for the
space in concern.
Our Contribution
Manish, Asawari…….
 Use existing and formulate new
management tools(using IT) to the planning
and the designing stage of the project
 Also use monitoring tools, if required,
during the execution of the project.
Architecture……





Absorb the client requirements, and come out with
alternatives to the existing architectural plan.
Suggest if any order of space or design can be
bettered.
Discuss various spaces in the project with the
client.
Discuss the various services required for the same.
If alternatives not determined then analize the
existing plan for energy efficiency, eco-friendly
ness, cost-effectiveness, ideal landscaping etc.
Services……







Prepare a questionnaire to obtain the client
requirements.
Refer existing standards for the corresponding work.
Conduct extensive discussions with the various external
agencies to arrive at efficient designs
Use IT tools(existing and make) to design the various
intricate calculations for services like HVAC.
Perform simulation for services :Lighting, HVAC.
Submit regular reports on the same.
Preparation of drawings as per the design decided if
required by the client.
Acoustic Design…….

Obtain client requirements through a
questionnaire.
 Consider existing standards and design
using IT tools (not available commercially).
 Try and design an enviornment friendly
acoustic design
Project Management……





Obtain the client requirements in terms of time.
Decide upon all the three resource requirements.
Make formats(preferably without the use of paper)
and other applications so as to facilitate instant
information exchange between all the agencies
involved.
Prepare charts as required to indicate efficient
planning and monitoring methods.
Implement various monitoring models else
customize them as per the clients requirement for
this project.
Structural Design…..





Calculate all the structural requirements of the
structure under concern after the architectural plan
is finalized.
Use existing packages like Staad and Ansys for the
efficient design of the same.
Refer the respective standards concerned with the
Shell Structure design.
Prepare drawings as per the clients requirements.
Convince the client of the structural design made.