Transcript 投影片 1 - Aerocool

"Professional Series – Red label" : Super tower or Super
mid-tower cases with elegant, clean line designs.
"Aluminum – Silver label" : Unique “Full aluminum” cases
targeting at power users, professionals and gamers.
"Ultimate Gaming Series – Black label" : Ultimate gaming
cases targeting at the extreme gamers. This Series offers
gamers with most functions, expandability and Extreme
cooling.
BLACK
"Compact – Blue Label" : Small form factor case series
including cube cases, mini-ITX and Mini-Tower
(Micro-ATX).
PGS Introduction
"Value Series" : Best VALUE gaming cases with the
highest C/P Ratio (Cost to Performance ratio).
This case is solidly constructed in 0.8mm and 1.0mm SECC Japanese steel and
beautifully finished both inside and out. The XPredator case is available in 2 models XPredator standard edition (All Black interior) and XPredator "Evil Black" edition
(Black/Orange combination). The XPredator "Evil Black" edition is beautifully finished
in Black/Orange combination - ie. the PCI covers, MB Plate and screw-less kits are highlighted in Orange color to make this case UNIQUE and stands out from others.
The XPredator case is designed with "User-Friendly" concept in mind and it gives
gamers great expandability and versatility. Its innovative "Screw-less" features and 90
degree rotated HDD cage make this chassis an easy install. Cable routing holes are
pre-drilled on the MB plate so users can eliminate the cable mess inside the chassis by
hiding the cables and wires behind the MB tray. These pre-drilled holes are also
protected by high quality rubber to prevent damages and cuts to the cables. A CPU hole
is also pre-drilled on the MB plate for ease of cooler assembly and removable.
This chassis offers great expansion capabilities. It supports 6 x 5 1/4" external devices, 1
x 3 1/2" external device with converter bracket (included) and 6 x Hard Drives (either
SSD, 2.5" HDDs or 3.5" HDDs). The chassis is also deep and large enough to support
High End VGA cards up to 330mm in length and the latest XL-ATX Motherboards such
as Gigabyte's latest X58-UD9 Motherboard. The XPredator case comes with 10 x PCI
slots and give users the option to set up Quad SLi systems - up to 4 VGA cards. The
chassis is also wide enough to support High End CPU cooler up to 190mm in height.
Its maximized airflow with 8 fans including a front in-take 23cm Orange LED fan
(included), a Back Exhaust 12/14cm fan (optional), a top in-take 23cm fan (included), 1
x 12/14cm bottom in-take fan (optional) and 4 x 12cm/14cm or 1 x 18/20cm in-take side
panel fans (optional). In addition, 2 sets of fan controllers are provided to control these
fans.
Other advance features included pre-installed rubber grommets for HDDs and PSU to
reduce vibration during system operation. Quad water-cooling holes are pre-drilled to
support high end water-cooling systems. A Super Speed USB3.0 port is included to
support the latest technology.
The XPredator case is as close as it gets to a "DREAM" case !!!
Design Concept
Aerocool is proud to present our FIRST SUPER TOWER CASE - “XPREDATOR" under
the PGS-B (Black) label. This ultimate gaming case is both sleek and aggressive in
design and it features higher performance and innovative functions, superb airflow, easy
installation and supports today's latest and hottest CPUs, motherboards, graphic cards
and technology such as USD3.0 devices and Solid State Drives.
Gallery
Front
Back
Side
Top
Features
- High Performance "Super Tower" for gamers and enthusiasts.
- Solidly constructed chassis - The chassis is solidly constructed with 0.8mm and 1.0mm
SECC Japanese steel.
- Unique and Attractive Internal Color Combination - The standard XPredator model comes
with "All Black' interior. The XPredator "Evil Black" edition is beautifully finished
in Black/Orange combination - ie. the PCI covers, MB Plate and screw-less kits are highlighted in Orange color to make the case UNIQUE and stands out from the others.
- High-End Graphic Card Support (up to 330mm) - Supports Longer high-end VGA cards up
to 330mm.
- High Expandability and Supports the latest XL-ATX MB such as Gigabyte's latest X58UD9 Motherboard - Supports 6 x 5.25" external devices, 6 x HDDs (either SSD or 3.5" HDDs
or 2.5" HDDs) and 1 x 3.5" external device (with the converter provided) such as a Floppy
drive or a Card Reader.
- Ease of Installation - The XPredator case includes an array of advance features to enhance
every stage of build. New innovative 5.25", 3.5" and PCI slot screw less designs make
installing and swapping components an effortless process.
- Easy Access Top I/O Ports w/ USD3.0 support - 3 sets of USB 2.0, 1 x USB 3.0 Super
Speed USB, Audio/Mic (AC 97 + HD audio) and E-SATA ports are located on the top panel for
easy access.
- Smart Cable Routing and Management - Cable routing holes are pre-drilled on the MB
plate so users can hide cables and wires behind the MB tray. These pre-drilled holes are also
protected by high quality rubber to prevent damages to the cables.
- Dust Protection - Includes removable bottom PSU dust filters to prevent dust entering your
computer.
- Mesh PCI cover - Includes Metal Mesh PCI covers for better ventilation.
- Bottom PSU position - the bottom PSU location enables PSUs to suck in cold air and
provide better air flow for your system.
- Water-cooling Support - Quad water-cooling holes are pre-drilled to support water-cooling
systems.
- High End Cooler Support and Assembly - CPU hole is pre-drilled on the MB plate for
simple cooler assembly and removable. The chassis can also support High End coolers up to
190mm in height.
- Beautifully finished Transparent "Grey" Side Window with the option to install 4 x
12cm or 14cm fans !!
- Superb Airflow and Performance - The XPredator case comes with 1 x 23cm Quad Orange
LED front in-take fan, 1 x 23cm top exhaust fan, 1 x 12/14cm back exhaust fan (optional), 1 x
12/14cm bottom in-take fan (optional) and 4 x 12cm/14cm or 1 x 18/20cm in-take side panel
fans (optional). In addition, 2 sets of fan controllers are provided to control these fans.
- Rubber grommets for HDDs, case feet and PSU dampens vibration during system
operation.
Case Type
Material
Motherboards
Chassis Dimensions
Drive Bays
Expansion Slots
Max length space available for PCI slots
I / O Ports
Fan controller
:
:
:
:
:
:
:
:
:
Cooling System
Full Tower
SECC 0.8/1.0mm
Flex ATX / ATX / Micro ATX / Full ATX
600(H) x 234(W) x 555(D)
6 x 5.25" (External) / 6 x HDDs (internal) / 1 x 3.5" (External)
10 Slots
330mm
1 x USB 3.0 / 3 x USB 2.0 / e-SATA / Mic & headphone (AC97 & HD audio)
Controls 6 fans simultaneously with max combined wattage of 20W.
Front
Top
"Quad Orange LEDs"
Outline
Rated Voltage
Operating Voltage Range
Starting Voltage
Rated Current
Label Current
Locked Current
Power Consumption
Speed
Max AirFlow
Max Static Pressure
Noise
MTBF
:
:
:
:
:
:
:
:
:
:
:
:
:
230*200*30mm
12V
10.8~13.2V
8V
0.15A+10%Max
0.24A
0.24A+10%Max
2.88W+10%Max
750+-100RPM
49CFM
0.54mm-H2O
27dBA
25,000/hrs
230*200*30mm
12V
10.8~13.2V
8V
0.15A+10%Max
0.24A
0.24A+10%Max
2.88W+10%Max
750+-100RPM
49CFM
0.54mm-H2O
27dBA
25,000/hrs
Specifications
Spec
1. Front - 1 x 23cm fan Orange LED(included)
4. Top - 1 x 23cm fan (included)
2. Back - 1 x 12/14cm fan (optional)
5. Buttom - 1 x 12/14cm fan (optional)
3. Side - 4 x 12/14cm fans or / 1 x 18/20cm fan (optional)
Air Flow
Superb airflow - install up to 8 fans !!
Inside
Supports GA-X58A-UD9 Motherboard
(XL-ATX) - 34.5cmx 26.2cm
Close Up