Transcript Presentation name or presenter name

ASAP Server Components Overview
ASAP Server Components
APP
CPU & PCB
DISK
EXPAND
ASAP CI
NODE
MONITOR
COLLECTOR
PROCESS
RDF
LOG
SPOOLER
TAPE
TMF
1
ASAP - Command, Control, & Diagnosis
ASAP command interpreter provides:
• Command, control, status, and reporting for ASAP.
• ASAP database configuration.
• ASAP CI is also used to view ASAP exception log.
This section covers:
• ASAP CI
control commands.
• ASAP CI
control example.
• ASAP CI
status and log commands.
• ASAP CI
database configuration commands.
• ASAP CI
database maintenance commands.
• ASAP CI
server time synchronization.
• ASAP CI
entity display commands.
• ASAP CI
basic commands.
2
ASAP CI - Control Commands
SET
Displays or Alters ASAP Server Settings.
STARTUP
Starts COLLECT or MONITOR in specified nodes.
SHUTDOWN
Stops COLLECT or MONITOR in specified nodes.
PC
Host
Remote Hosts
3
ASAP DATABASE FEATURES
DBAPP
DBDSK
DBCPU
 ASAP Relational DB provides History of Objects,
States, Performance, and Service Level objectives.





Data Base Automatically maintained.
User defined database partitions.
Schema published in TIM and as DDL on CD
Published DDL allows Ad Hoc DB Queries
Provides Customer/Third Party DB access
4
ASAP Database Configuration
ASAP Database configuration allows:
 Default Database support.
 User defined Database location.
 Defined partition support for any ASAP entity.
 User defined default partitioning rules.
Database configuration commands:
 SET Collect command.
 SET DB command.
 SET SLEEPTIME command.
 SET Partition command.
Note:
Asap Version 1 records can be written to the ASAP Version 2 collector.
5
Database Commands
 SET COLLECT defines the Node were the ASAP Database
resides.
SET COLLECT \DBNODE
 SET DB defines the location ($Volume.subvol) for the ASAP
database files
SET DB $DATA.ASAPDB.DB
 SET SLEEPTIME defines the time range (hhmm,hhmm) that
statistics collection does not occur. Although statistics collection
ceases, the ASAP system remains active.
SET SLEEPTIME 00:00, 03:30
6
Partition Command
 SET PARTITION displays and defines
partitioning parameters for the ASAP
database. Asap partitioning uses standard
NSK partitioning rules. The parameters
can be set individually for each entity,
globally for all entities, or may utilize a
combination of the two approaches.
To display the current partitioning settings,
enter SET PARTITION without
any additional parameters.
$Data00
$Data01
$Data02
DBCPU
Part 0
DBCPU
Part 1
DBCPU
Part 2
7
SET PARTITION Continued
 SET PARTITION [ <partition descriptor> | <reset descriptor> | FORMAT2 ]
The <partition descriptor> has the following format:
{ <entity> | DEFAULT } { <part-num> | BASE | ALL } <part-opt> [, <part-opt>]
<entity> is the name of the specific entity (e.g. CPU, DISK) to which the
partitioning options apply. DEFAULT can be used in place of an entity name
in order to set default properties which will apply to all entities.
<part-num> is the partition number to which the partitioning options apply. The
value must be between 0 and 15 inclusive, BASE, or ALL, where 0 and BASE
indicate the base partition of the given entity, and values 1 - 15 indicate
secondary partitions. ALL can be used in place of a partition number in order
to specify primary and secondary extent sizes or maxextents values that are
to apply to all partitions of the entity.
8
SET PARTITION Continued
<part-opt> is one of:
{KEY
<key-value> }
{ SYSNO
<system-number> }
{ PRIEXT
<ext-value> }
{ SECEXT
<ext-value> }
{ MAXEXTENTS <maxext-value> }
{ VOLUME
<volume-name> }
The SET PARTITION command can also be used to reset the partitioning
attributes for all entities, a given entity, a single partition, or a single attribute
of a single partition. To do so, use the SET PARTITION command with a
<reset descriptor>.
SET PARTITION RESET
SET PARTITION DEFAULT 1 RESET
SET PARTITION DEFAULT 1 KEY “FUNDSTRANSFER” RESET
SET PARTITION FORMAT2 ON
FORMAT2 ON|OFF allows files to grow beyond 2 GB.
9
SET PARTITION Notes
NOTES:
 A VOLUME cannot be specified for a base partition (i.e.
partition number = 0), since this is controlled by the SET DB
command.
 Volume, SysNo, and Key values cannot be specified if the
partition number is all.
 A KEY and/or SYSNO value must be given for all secondary
partitions.
 Partitioning keys (made up of a combination of the SYSNO and
KEY values) must be defined in ascending order for each
partition.
 A VOLUME must be given for all secondary partitions.
10
Notes Continued

MAXEXTENTS values cannot be specified for secondary partitions if Format2 is
ON.
PRIEXT, SECEXT, and MAXEXTS values specified for partitions of the DEFAULT
entity are used when creating partitions of all other entities.
The collector automatically adjusts the length of the partitioning keys.
SET DB command will reset all partitioning attributes.
The Collector utilizes only valid partition descriptions when creating the database.
When partitioning is enabled for a given entity, the "Valid" column of the SET
PARTITION output will indicate the status of each configured partition. The column
contains one of the following values:





•
•
•
•
•
•
•
•
•
•
•
YES
No-Vol
No-Sys/Key
No-Vol, Sys/Key
No-Prior Inv
??-Key Seq
??-Dup Vol
??-Vol UnKnown
??-Vol Down
??-Partn Size
MaxExt n/a
11
SET PARTITION Examples
 SET PARTITION DEFAULT ALL PRIEXT 256, SECEXT 512,
MAXEXTENTS 300
 SET PARTITION PROCESS 1 SYSNO 53
 SET PARTITION PROCESS 1 SYSNO 11, VOLUME $DATA1
 SET PARTITION PROCESS 2 SYSNO 21, VOLUME $DATA2
 SET PARTITION APP 1 SYSNO 120, KEY “FUNDSTRANSFER”,
VOLUME $DATA
 SET PARTITION APP 0 SYSNO 120
12
ASAP 2 Entities
APP
Reports APPLICATION availability.
CPU
Reports CPU availability.
DISK
Reports Disk devices availability.
EXPAND
Reports Expand Path and Line availability.
FILE
Reports on File or Subvolume availability.
NODE
Reports on Expand end-to-end node availability.
PROCESS
Reports on user selected processes.
PROCESSBUSY
Reports on busiest process availability.
RDF
Reports on RDF availability.
SPOOLER
Reports on Spooler availability.
TAPE
Reports on Tape devices availability.
TMF
Reports on TMF availability.
SYSTEM
Reports on System availability.
13
ASAP 2.0 ENTITIES
ASAP Entities Characteristics:
 Default Entity support.
 User defined Entity configurations.
 Entities can report on availability of user specified objects.
 User defined threshold settings of specified objects and attributes using the
operators >, <, =, <>, <= and >=.
Entity configuration commands:
 SET <entity> command.
 MONITOR command.
 RANK <entity> command.
Note:
Asap Version 1 records can be written to the ASAP Version 2
collector.
14
CPU Entity Features $<AsapID>0..F
 All CPU types are supported.
 All memory types are supported.
 Auto-discovery of all configured cpu’s.
 Performance availability counters.
 Supports user defined CPU object monitoring.
 Supports user defined discrete object thresholds
15
CPU Attributes
Attribute
Description
Value
BUSY
Percent CPU busy
Integer
QUEUE
CPU Queue length
Integer
DISP
Dispatch rate
Integer
DISK
Disk I/O rate per second
Integer
CHIT
Disk cache hit rate per second
Integer
SWAP
Memory manager page faults per second
Integer
MEMQ
Percent of total physical memory pages locked
Integer
PGS
Percent of total physical memory pages locked
Integer
PCB
Percent usage low pcb’s (pins 0 -254)
Integer
PCBX
Percent usage of high pcb’s pins above 255
Integer
TLE
Percent usage of time list elements
Integer
SEGS
Percent of maximum virtual memory segments used
Integer
16
DISK Entity Features $<AsapID>J
 All disk types are supported except for Virtual
disks and optical disks.
 Auto-discovery of all configured disk volumes.
 Availability information reported by the client is:
The largest performance value of a volume pair.
Highest operational state information of the
volume pair.
 Supports user defined disk object monitoring.
 Supports user defined discrete object thresholds
17
DISK SET Command
 SET Disk ON|OFF Enables/Disables disk availability information.
Default OFF
 Set Disk object $System.system.asapdsk defines the Disk program object
filename. Default $SYSTEM.SYSTEM.ASAPDSK
 Set Disk Param “Param, param1…”
Disk params:
CPU <cpu num>
defines the Cpu where the MEASFH process will reside.
NOMEAS
prevents disk performance statistics and availability thresholds from being
collected.
RATE <minutes>
defines the interval, in minutes, that DISK availability information is
reported back to the Collector. The Disk SGP uses the ASAP rate as the
18
default.
DISK SET Command Continued
Disk Params Cont:
VOLUME [<$volume>][.][<subvolume>]
specifies the location of the Measure Data file. Default $System.system
SUBVOL <subvolume>
specifies the subvolume location of the Measure Data file. The default
subvolume is SYSTEM.
SWAPVOL [<$volume>]
specifies the location for the Measfh swap volume. The default is
$SYSTEM.
Here is an example of the SET DISK command:
+SET DISK ON, OBJECT $SYSTEM.ASAP.ASAPDSK,
PARAMETERS “SWAPVOL $DATA.ASAP RATE 10"
19
DISK Attributes
ATTRIBUTE
DESCRIPTION
Value
P
Primary disk path in use, value = P or B
Char 1 wide
M
Mirror disk path in use, value = P or B
Char 1 wide
CPU
Primary CPU # of the DP2 process for the volume
Integer
FULL
Percentage of disk space currently used
Integer
REQUESTS
Number of Disk I/O requests per second
Integer
BUSY
Percent time disk busy reading, writing, & seeking
Integer
WRITE
Percent time disk busy writing
Integer
READ
Percent time disk busy reading
Integer
CHIT
Total cache hits per second for all block sizes
Integer
SWAP
Number of disk page swaps per second
Integer
QLEN
Disk process receive queue length
Integer
INKB
Input kilobytes per second
Integer
OUTKB
Output kilobytes per second
Integer
RATE
Total of DP2 reads, writes, and seeks per second
Integer
READS
Number of DP2 read operations per second
Integer
20
DISK – Troubleshooting tips
 DISK SGP uses measure API interface for collecting raw DP2
counters.
– Use the commands in MEASCOM for determining if it is a
measure problem or disk entity problem
 ADD MEASUREMENT $VOL.SUBVOL.ZASP<AsapID>
 STATUS MEASSUBSYS
 LISTACTIVE DISC $VOL (Cpu, Channel, Controller Unit)
LISTACTIVE DISC $SYSTEM (0, 0, %24, 0) or (0, 0, 20, 0)
 LISTACTIVE DISC $VOL (cpu, SVNET, Group, Module, Slot)
LISTACTIVE DISC $SYSTEM (0, X, 1, 1, 11)
 STOP MEASUREMENT $VOL.SUBVOL.ZASP<ASAPID>
 DELETE MEASUREMENT $VOL.SUBVOL.ZASP<ASAPID>
21
EXPAND Entity Features $<AsapID>K
 All Expand line types are supported. Including
multi-line Expand.
 Auto-discovery of all configured Expand lines and
Expand paths.
 Performance availability counters.
 Expand SGP is a multiple entity. The two entity
types are Expand and ExpandIP.
 Supports user defined Expand object monitoring.
 Supports user defined discrete object thresholds
22
EXPAND Set Command
 Set Expand ON|OFF Enables/Disables Expand availability information.
Default OFF
 Set Expand object $System.system.asapdsk defines the Expand program
object filename. Default $SYSTEM.SYSTEM.ASAPEXP
 Set Expand Param “Param”
Expand params:
RATE <minutes>
defines the interval, in minutes, that EXPAND statistics are reported back to
the Collector. The Expand SGP uses the ASAP rate as the default.
Here is an example of the SET EXPAND command:
+SET EXPAND ON, OBJECT $SYSTEM.ASAP.ASAPEXP, PARAMETERS
“RATE 10"
23
EXPAND Attributes
ATTRIBUTE
DESCRIPTION
Value
POOL
Percent utilization of Expand line handler I/O Pool
Integer
PFAIL
Number of pool failures during the sample interval
Integer
NoBuf
Number of no buffer failures
Integer
BCC
Number of BCC errors during the sample interval
Integer
NakSnt
Number of Level-4 negative acks sent
Integer
NakRvd
Number of Level-4 negative acks received
Integer
PktSnt
Number of Level-4 packets sent
Integer
PktRvd
Number of Level-4 packets received
Integer
PThruSnt
Number of Level-4 PassThru packets sent
Integer
PThruRvd
Number of Level-4 PassThru packets received
Integer
LnkSnt
Number of requests sent
Integer
LnkRvd
Number of requests received
Integer
24
EXPANDIP Attributes
ATTRIBUTE
DESCRIPTION
Value
DFramSnt
Number of IP/ATM data frames sent
Integer
DFramRvd
Number of IP/ATM data frames received
Integer
DFByteSnt
Data kilobytes sent per second
Integer
DFByteRvd
Data kilobytes received per second
Integer
CnctCmdSnt
Number of IP/ATM connect commands sent
Integer
CnctCmdRvd
Number of IP/ATM connect commands received
Integer
CnctRspSnt
Number of IP/ATM connect responses sent
Integer
CnctRspRvd
Number of IP/ATM connect responses received
Integer
25
EXPANDIP Attributes Continued
ATTRIBUTE
DESCRIPTION
QryCmdSnt
Number of query commands sent
Value
Integer
QryCmdRvd Number of query commands received
Integer
QryRspSnt
Number of query responses sent
Integer
QryRspRvd
Number of query responses received
Integer
MemLow
Number of times memory low indication given by QIO
Integer
InvFrn
Number of IP/ATM invalid frames received
Integer
DrpFrm
Number of IP/ATM frames dropped
Integer
InvAdr
Number of IP/ATM frames rcvd from an unexpected system
Integer
26
EXPAND – Troubleshooting tips
 Expand SGP uses SPI interface for communicating with the
Expand manager process $Zexp.
– Use the commands in SCF for determining if it is a
Expand manager problem or Expand entity problem
 Assume line $<Expand line handler> Type 63 subtype 1,2,6 are
Multiline Expand.
 STATS LINE $<Expand line handler>
 STATS PATH $<Expand line handler> non multiline Expand
 STATS PATH $<Path name>
 STOP $ZEXP if allowed by customer
27
File Features $<AsapID>L
 File domain can be a selected file or a sub-volume
 Domain name examples:
– $System.system.userid
– $Data.sqldb
 All file types supported, including Format2, SQL, virtual
files, but not OSS files
 Sub-domains attributes and states are aggregated to the
sub-volume domain level
 Detailed information about sub-domains of a sub-volume
is available via ‘Show Object Details’ Client popup menu
 Auto-discovers ASAPMON file
 Supports user defined file object monitoring.
 Supports user defined discrete object thresholds
28
FILE Set Command
 Set File ON|OFF Enables/Disables file availability information. Default ON
 Set File object $System.System.Asapfil defines the File program object
filename. Default $SYSTEM.SYSTEM.ASAPFIL
 Set File Param “Param”
File params:
RATE <minutes>
defines the interval, in minutes, that FILE availability information is
reported back to the Collector. The File SGP uses the ASAP rate as the
default.
Here is an example of the SET FILE command:
+SET FILE ON, OBJECT $SYSTEM.ASAP.ASAPFIL, PARAMETERS
“RATE 10"
29
File Attributes
Attributes
State Pair?
Domain
Description
File domain name
*Status
Yes
Operational Status
Error
Yes
Error number indicating status of data
Full
Yes
Percentage full
Eof
Yes
Size in bytes
Owner
Yes
Group, User
Rwep
Yes
Read, Write, Execute, Purge security
Open
Yes
File is open?
Tmf
Yes
File is audited by TMF?
Files
Yes
Number of files in sub-volume
Code
File code
Format
File format
Type
File type
Partitions
Number of partitions
LastOpen
Last time file was opened in LCT
LastModif
Last time file was modified in LCT
*Status attribute also has StateIsOp=Yes, you cannot set objectives on it.
30
NODE Entity Features $<AsapID>G
 Auto-discovery of all configured nodes.
 End to End Performance availability counters.
 Does NOT support user defined node object
monitoring.
 Does NOT support user defined discrete object
thresholds
31
NODE Set Command
 Set Node ON|OFF Enables/Disables Node availability information. Default
OFF
 Set File object $System.System.Asapncp defines the node program object
filename. Default $SYSTEM.SYSTEM.ASAPNCP
 Set Node Param “Param”
Node params:
RATE <minutes>
defines the interval, in minutes, that NODE statistics are reported back to
the Collector. The Node SGP uses the ASAP rate as the default.
Here is an example of the SET NODE command:
+SET NODE ON, OBJECT $SYSTEM.ASAP.ASAPNCP, PARAMETERS
“RATE 10"
32
PROCESS Entity Features $<AsapID>T
 NonStop Kernel are supported, OSS processes
are not supported.
 Performance availability counters.
 User defined process object monitoring.
 User defined discrete object thresholds support.
 Auto-discovery of $<aspaid>M
33
PROCESS Set Command
 Set Process ON|OFF Enables/Disables Process availability information.
Default ON.
 Set Process object $System.System.Asappro defines the Process program
object filename. Default $SYSTEM.SYSTEM.ASAPPRO
 Set Process Param “Param, Param1”
Process params:
RATE <minutes>
defines the interval, in minutes, that PROCESS availability information is
reported back to the Collector. The Process SGP uses the ASAP rate as
the default.
TRACE
turns on $RECEIVE trace to the EMS and ASAP log files.
Here is an example of the SET PROCESS command:
+SET PROCESS ON, OBJECT $SYSTEM.ASAP.ASAPPRO,
PARAMETERS “RATE 10 TRACE"
34
PROCESS Objective Attributes
 The following process attributes can have objectives set against using the RANK
PROCESS, <attr> <Val> command.
ATTRIBUTE
DESCRIPTION
Value
ERROR
Collection error
Integer
CPU
Process primary CPU
Integer
PRI
Primary process priority
Integer
BCPU
Process backup CPU
Integer
BUSY
Process Busy
Decimal
PSTATE
Unalloc, Start, Run, Suspnd, Dbg brk, Dbg trap, Dbg req, Insp
Character 8
WSTATE
Lsig/Lpipe(status), Pon(cpu pwr), Iopon (I/O pwr), Intr
Character 8
MPAGES
Memory pages in use
Integer
MSENT
Messages sent per second
Integer
MRECVD
Messages received per second
Integer
QLEN
Receive queue length
Integer
MQLEN
Maximum receive queue length
Integer
PFAULTS
Page faults per second
Integer
35
PROCESSBUSY Features $<AsapID>0..F
 All NonStop Kernel processes are supported.
 Ranks n Busiest Processes.
 Performance availability counters.
 Supports user defined Busy PCB object monitoring.
 Supports user defined discrete object thresholds
36
PROCESSBUSY Attributes
ATTRIBUTE
DESCRIPTION
Value
BUSY
Average Cpu Busy
Integer
RCVQ
Process receive queue length integrated
Integer
RCVMSG
Messages received per second
Integer
SNDMSG
Messages sent per second
Integer
PAGES
Number of memory manager pages
allocated to process
Integer
LCB
Number of LCBs in use by the process
Integer
37
PROCESSBUSY Set Command
 Processbusy is not an Extended SGP it is part of the CPUSGP
($ZOO0..$ZOOF)
 To set Processbusy availability information off use the Monitor
Processbusy 0..F,OFF. Default ON
 Set Processbusy Param “Param, Param1”
Processbusy params
ENTRIES <cnt> defines the number of busy processes per CPU will
be collected/displayed. The range is 1- 20. default is 3.
This attribute is optional.
SUBSAMPLES <cnt> defines the number of subsampling will be taken
during a sample interval, specified by SET RATE. The range is 1- 10.
The default is 3. This attribute is optional.
Example: SET PROCESSBUSY ENTRIES 5, SUBSAMPLES 3.
38
RDF Features $<AsapID>N
 Supported with RDF/IMP(X) V1.3 onward
 RDF SGP object by default is installed on
$SYSTEM.RDF.ASAPRDF
 Collects availability information on the RDF
monitor, extractors, receivers, updaters and
purger.
 Supports user defined RDF object monitoring.
 Supports user defined discrete object thresholds
 SGP autodiscovers RDF environments by finding
RDF CONFIG files (code 721) on $SYSTEM
39
RDF Set Command
 Set RDF ON|OFF Enables/Disables RDF availability information. Default
OFF
 Set RDF object $System.System.Asaprdf defines the RDF program object
filename. Default $SYSTEM.SYSTEM.ASAPRDF
 Set RDF Param “Param, Param1”
RDF params:
RATE <minutes>
defines the interval, in minutes, that RDF availability information is reported
back to the Collector. The RDF SGP uses the ASAP rate as the default.
TRACE
turns on $RECEIVE trace to the EMS and ASAP log files.
Here is an example of the SET RDF command:
+SET RDF ON, OBJECT $SYSTEM.ASAP.ASAPRDF, PARAMETERS
40
“RATE 10 TRACE"
MONITOR RDF command
 The alternative to autodiscovery is to monitor
specific RDF environments.
MONITOR RDF CHI->NYC
(note no backslashes on node names)
 Limited validation, errors will be reported by RDF
SGP to event log every poll interval
41
RDF Objective Attributes
 The following RDF attributes can have objectives set against using the RANK
RDF, <attr> <Val> command.
DESCRIPTION
ATTRIBUTE
Value
ERROR
Error number indicating status of data
Integer
RTDSECS
Relative time delay in seconds
Integer
RTDTIME
Relative time delay in hh:mm:ss
Integer
PCPU
Primary CPU
Integer
BCPU
Backup CPU
Integer
PRIORITY
Execution priority
Integer
42
RDF Command
RDF [/out <file>/] [\*
] [[.] * ] [, <options>]
[\<node>] [[.] <domain>]
where options is one or more of:
CPU
Displays RDF domain/metric values in the specified CPU
DETAIL
Displays RDF Metric values based on FORMAT command
settings.
SAMPLES Number of samples to display.
STATE
Displays RDF Metric values and their objective states.
TIME
Show stats starting at a time other than the current time.
VOLUME Displays the associated disk volumes.
43
RDF Troubleshooting
 Check RDF SGP is actually running on both the RDF primary and
backup nodes
 If no stats are being reported, check RDF status with RDFCOM from
the RDF primary system using STATUS RDF
 If autodiscovery is being used find all the code 721 RDF CONFIG
files
FILEINFO $SYSTEM.*.CONFIG
This will show the environments that should be reporting stats
 If using MONITOR RDF for specific RDF environments check what is
being monitored with MONITOR RDF, LIST
 Manually stopping the $<AsapIA>N process will cause it to be restarted and re-autodiscover
44
Spooler Features $<AsapID>O
 Spooler autoconfiguration is $SPLS
 4 Spooler sub-domains for each spooler domain.
– $SPLS\Coll, $SPLS\Dev, $SPLS\Print and $SPLS\Super
for the $SPLS spooler
 Specific detail information at a lower sub-domain level
– $SPLS\DEV\$LP has specific device info
 Spooler monitoring is done at the top domain level
– MONITOR SPOOLER $SPLS
 Spooler ranking can be done at any level
– RANK SPOOLER $SPLS\DEV\$LP, DEACTIVATE
45
Spooler Features (cont.)
 Information available in 2 modes: aggregation
and detail
– $SPLS\Dev is the aggregate for the print devices
– $SPLS\Dev\$LP is a specific device available in
detail mode
 SGP default mode is aggregation
– Use SGP startup parameter DETAIL to have SGP
work in detail mode
46
SPOOLER Set Command
 Set Spooler ON|OFF Enables/Disables Spooler availability information.
Default OFF
 Set Spooler object $System.System.Asapspl defines the node program
object filename. Default $SYSTEM.SYSTEM.ASAPSPL
 Set SPL Param “Param, Param1”
SPL params:
DETAIL
returns individual records for the spooler collector, processes and devices.
RATE <minutes>
defines the interval, in minutes, that Spooler availability information is
reported back to the Collector. The Spooler SGP uses the ASAP rate as the
default.
47
SPOOLER Set Command Continued
TRACE
turns on $RECEIVE trace to the EMS and ASAP log files.
Here is an example of the SET SPOOLER command:
+SET SPOOLER ON, OBJECT
$SYSTEM.ASAP.ASAPSPL, PARAMETERS “RATE 10
TRACE"
48
Spooler Attributes
Attributes
State Pair?
Domain
Description
Applies to Domain
Spooler domain name
All
*Status
Yes
Operational Status
All
Error
Yes
Last error number encountered by object
All
Number of objects comprising the entry
All
NumObjs
PCPU
Yes
Primary CPU for the object
Coll, Print, Super
BCPU
Yes
Backup CPU for the object
Coll, Print, Super
Jobs
Yes
Number of jobs for the object
All
Batch
Yes
Number of batch jobs for the object
All
Open
Yes
Number of open jobs for the object
All
Print
Yes
Number of printing jobs for the object
All
Hold
Yes
Number of jobs on hold for the object
All
DevQs
Yes
Number of device queues for the object
Dev, Print, Super
Locs
Yes
Number of locations for the object
Dev, Print, Super
Fonts
Yes
Number of font jobs for the object
Dev, Super
Full%
Yes
Percentage full
Coll, Super
*Status attribute also has StateIsOp=Yes, you cannot set objectives on it.
49
Spooler Attributes - Detail
Description
Applies to Domain
Prty
Priority of the process for the object
Coll, Print, Super
File/Process
Name
Associated file or process name
All
Size
Size of collector units
Coll
UnitAlloc
Number of collector units currently used
Coll
TotUnits
Total number of collector units available
Coll
Flags
Configuration flags
Dev, Print
Retry
Number of retries attempted while in error
Dev
Intvl
Interval to wait between retries
Dev
Max
Maximum number of retries allowed
Dev
FormName
Form name associated with print device
Dev
Colls
Total number of collectors in spooler
Super
Devs
Total number of printer devices in spooler
Super
PProcs
Total number of print processes in spooler
Super
Attributes
State Pair?
50
Spooler – Troubleshooting Tips
 Autoconfiguration is $SPLS only.
 Spooler SGP uses the SPOOLER Procedures
Calls SPOOLERSTATUS or SPOOLERSTATUS2
to get the state and status information
 Aggregation vs Detail
– Default SGP behavior is aggregation
– SPOOLER, DETAIL or SHOW DETAIL INFO can
be used to get detail
– Use SGP STARTUP PARAM DETAIL to have
Spooler SGP collect data in detail mode
51
SYSTEM Entity Features $<AsapID>0..F
 Auto-discovery of all configured cpu’s.
 System average of all monitored cpu’s.
 Performance availability counters.
 Supports user defined System monitoring.
 Supports user defined discrete object thresholds
SYSTEM Objective Attributes
52
SYSTEM Objective Attributes
 The following System attributes can have objectives set against using the
RANK SYSTEM, <attr> <Val> command.
ATTR
DESCRIPTION
Value
BUSY
Percent CPU busy
Integer
QUEUE
CPU Queue length
Integer
DISP
Dispatch rate
Integer
DISK
Disk I/O rate per second
Integer
CHIT
Disk cache hit rate per second
Integer
SWAP
Memory manager page faults per second
Integer
MEMQ
Percent of total physical memory pages locked
Integer
PGS
Percent of total physical memory pages locked
Integer
PCB
Percent usage low pcb’s (pins 0 -254)
Integer
PCBX
Percent usage of high pcb’s pins above 255
Integer
TLE
Percent usage of time list elements
Integer
SEGS
Percent of maximum virtual memory segments used
Integer
53
Tape Features $<AsapID>Q
 Tape domains = tape devices
– EG. $TAPE1, $SILO02
 Autoconfiguration is all tape devices on the node
 Information kept about tape domains:
– Tape device status information
– Tape mount requests
 Tape device status information
– Information about the current status of the tape device
 Tape mount requests information
– Information about all the tape mount requests on the node
54
TAPE Set Command
 Set Tape ON|OFF Enables/Disables Tape availability information. Default
OFF
 Set Tape object $System.System.Asaptap defines the Tape program object
filename. Default $SYSTEM.SYSTEM.ASAPTAP
 Set TAPE Param “Param, Param1”
Tape params:
RATE <minutes>
defines the interval, in minutes, that Tape availability information is reported
back to the Collector. The Tape SGP uses the ASAP rate as the default.
TRACE
turns on $RECEIVE trace to the EMS and ASAP log files.
Here is an example of the SET TAPE command:
+SET TAPE ON, OBJECT $SYSTEM.ASAP.ASAPTAP, PARAMETERS
“RATE 10 TRACE"
55
Tape Attributes (1 of 2)
Attributes
State
Pair?
Domain
Description
Special for Tape, Detail
Mount Request Information
Tape domain name
*Status
Yes
DeviceNo
Operational status
Logical device number
PCPU
Yes
Primary CPU number of tape device
BCPU
Yes
Backup CPU number of tape device
SubType
Sub type of the tape device
ACS
Yes if device is an automated cartridge system
Checks
Indicates which tape checks are enabled
MountReq
Yes
Current number of mount requests for device
MountTime
Yes
Number of minutes since MountReq > 0
TapeName
Mount Tape Request Number
Name of mounted tape on tape device
Name of requested tape (if specified)
TapeStatus
Yes
Status of mounted tape on tape device
Tape density requested (if specified)
TapeLabel
Yes
Label of mounted tape on tape device
Label type requested (if specified)
*Status attribute also has StateIsOp=Yes, you cannot set objectives on it.
56
Tape Attributes (2 or 2)
Description
Special for Tape, Detail
Mount Request Information
Label of mounted tape on tape device
Label type requested (if specified)
ProcName
Name of process which has tape device open
Proc name requesting tape mount
Progname
Program filename which has tape device open
Prog name requesting tape mount
UserID
Userid which is using the tape device
Userid requesting tape mount
Attributes
TapeLabel
State
Pair?
Yes
Prot
Yes if a write protected tape is
requested (if specified)
IO
Input/Output mode requested (if
specified)
Action
Action required to statistic mount
request
*Status attribute also has StateIsOp=Yes, you cannot set objectives on it.
57
Tape – Troubleshooting tips
 TAPE SGP uses SPI interface to talk to
MEDIASRV server
– MEDIASRV server must at least be D42 AAT or
newer
– MEDIASRV is part of the DSM/Tape Catalog
Product and must installed properly
– MEDIASRV uses the tape server ZSERVER
($ZSVR)
SCF;STOP TAPE $*; ALTER $ZZSTO, LABELTAPE ON; START TAPE $*
ZSERVER /NAME $ZSVR,NOWAIT,cpu 0,pri 160,term $ymiop.#clci/1
MEDIACOM;ALTER TAPEDRIVE *,NLCHECK OFF
58
TMF Features $<AsapID>R
 4 TMF domains: Auditdump, Audittrail, Tmf, Transactions
 Auditdump, Audittrail and Transactions domains are
aggregated records, e.g. the Audittrail record represents
the Master audit trail and all auxiliary audit trails.
 Aggregated records represent only a subset of the subdomain attributes: detailed information about subdomains is available via ‘Show Object Details’ Client
popup menu. Use this feature to view the list of pending
transactions for example, or the list of audit trails with
more attributes
 TMF SGP uses SPI calls to TMFSERVE to obtain stats
 Auto-discovers all 4 TMF domains
59
TMF Set Command
 Set TMF ON|OFF Enables/Disables Tape availability information. Default
OFF
 Set TMF object $System.System.Asaptmf defines the TMF program object
filename. Default $SYSTEM.SYSTEM.ASAPTMF
 Set TMF Param “Param, Param1”
Tape params:
RATE <minutes>
defines the interval, in minutes, that TMF availability information is reported
back to the Collector. The TMF SGP uses the ASAP rate as the default.
TRACE
turns on $RECEIVE trace to the EMS and ASAP log files.
Here is an example of the SET TMF command:
+SET TMF ON, OBJECT $SYSTEM.ASAP.ASAPTAP, PARAMETERS
“RATE 10 TRACE"
60
TMF Attributes
Attributes
State Pair?
Domain
Description
Applies to Domain
TMF domain name
All
*Status
Yes
Operational Status
All
Error
Yes
Error number indicating status of data
All
Master Audit Trail/Auxiliary<nn>
Auditdump,
Audittrail
Type
Active
Yes
Audit dump currently dumping?
Auditdump
Ovflw
Yes
Overflow space in use?
Audittrail
Hold
Yes
Audit stopped, no space in audit trail?
Audittrail
Used
Yes
Percentage of audit trail file used
Audittrail
Tps
Yes
Transaction rate per second
Tmf
BeginTr
Yes
Begin transaction status
Tmf
Catalog Status
Tmf
Catalog
Trans
Yes
Number of pending transactions
Transactions
Hung
Yes
At least one transaction hung?
Transactions
Duration
Yes
Elapsed time of a transaction in seconds
Transactions
*Status attribute also has StateIsOp=Yes, you cannot set objectives on it.
61
TMF – Troubleshooting tips
 TMF SGP uses SPI interface to talk to TMFCOM
server
– Use those commands in TMFCOM to get the
information displayed by the TMF SGP:
 status tmf
 status transactions
 status audittrail
 info audittrail
 status auditdump
62
ASAP SET Control Command
 ASAP control and node configurations settings are performed by using the ASAP
SET command.
SET APP
<entity option>
SET BACKUPCPU
<cpu> | *
SET BUFFERED
ON | OFF
defines whether writes to the data base files are buffered or unbuffered.
SET BUFFERED ON helps reduces physical data base I/O for large network
configurations. SET BUFFERED OFF assures that physical database I/O
occurs in realtime.
SET CLEANTIME
<time>
SET COLLECT
\<collect node>
SET EDL
<EDL filename>
defines and compiles a file containing ASAP Entity Definition Language
(EDL) statements.
SET HELPFILE
<filename>
defines the name of the ASAP help file
63
SET Control Command Continued
SET
ID $<ASAP process id>
defines the ASAP pid, or ASAP process id name set.
Logical Function
COLLECT
MONITOR (node)
SGP
(cpu)
ASAPXSGP(app)
ASAPDSK (dsk)
ASAPEXP (exp)
ASAPFIL (fil)
ASAPNCP (ncp)
ASAPPRO (pro)
ASAPRDF (rdf)
ASAPSPL (spl)
ASAPTAP (tap)
ASAPTMF (tmf)
Process
$<ASAP
$<ASAP
$<ASAP
$<ASAP
$<ASAP
$<ASAP
$<ASAP
$<ASAP
$<ASAP
$<ASAP
$<ASAP
$<ASAP
$<ASAP
name
pid>
pid>
pid>
pid>
pid>
pid>
pid>
pid>
pid>
pid>
pid>
pid>
pid>
S
M
0-F
H
J
K
L
G
T
N
O
Q
R
Default
$ZooS
$ZooM
$Zoo 0..9 A..F
$ZooH
$ZooJ
$zooK
$zooL
$ZooG
$zooT
$zooN
$zooO
$zooQ
64
$zooR
SET Command Continued
SET IOCONTROL <count>
IOCONTROL <count> configures the maximum number of
output lines that can be written to the output file for any
command before a <more?> prompt is issued.
SET LOGFILE <filename>
defines the name of the file used for ASAP command interpreter
input/output capture. LOGGING ON/OFF controls access to the
file. Default $ASAPVOL.ASAPSUBVOL.LOGFILE
SET LOGINTERVAL <minutes>
defines the interval, in minutes that duplicate ASAP error events
are suppressed.
SET LOGSUPPRESS ON | OFF
controls the suppression of duplicate ASAPLOG file error events
and EMS tokenized error events. The default is ON.
65
SET Commands Continued
SET LOGGING
ON | OFF
Logging on captures all ASAP CI input/output to be written to the file set
by LOGFILE.
SET ASAPLOG
<filename>
defines the name of the monitor/collect error disk logfile
SET OBJCOLLECT
<collect object>
defines the collect program object filename.
Default $SYSTEM.SYSTEM.ASAPCOL
SET OBJMONITOR
<monitor object>
defines the monitor program object filename.
Default $SYSTEM.SYSTEM.ASAPMON
SET OBJECTIVESAUDIT
SET OBJECTIVESDB
SET OBJECTIVESEVENT
ON | OFF
<filename>
ON | OFF
66
SET Command Continued
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
OBJECTIVESEVENTUP
ON | OFF
OBJECTIVESEVENTCONSOLE
ON | OFF
OBJECTIVESEVENTCONSOLEUP ON | OFF
OBJECTIVESEVENTSTATE
<OEM State>
OBJECTIVESEVENTMAX
<max events per domain per interval>
OBJECTIVESRANK
STANDARD | PERCENT | HISTORICAL
PRIMARY
<cpu> | *
PRIORITY
<server priority>
SLEEPTIME
<time>,<time>
SYNCSLOW
ON | OFF
TERM
<logterm> | OFF
defines the Collect or Monitor terminal log-file name to which internal
Errors and actions are logged. The default is $0. A disk error log file
$SYSTEM.ASAP.ASAPLOG is always created and maintained.
SET TRACE
ON | OFF
SET INSPECT
ON | OFF
67
ASAP CI - Control Example
NSK Local Node
Workstation
ASAP
Clien
t
ASAP
Server
Properties
Window
Graph
Window
O
Browse
E
Window
M
Session
And
Graph
Window
ASAP
Database
ASAP
Database
Real-Time
Data
Graph
Window Management
CSG
SSG
Collect
Asap
Client SeeView
Server
Server Command Database
Gateway Gateway Interface
Server
App
Cpu
Disk
Expand
Process
System
Report
Window
Report
Window
Report
Window
– SET
DB $DATA.ASAP.DB
– SET
RETAIN NONE
– START COLLECT
–
–
–
–
SET
START
SET
START
Monitor
\Chicago
Cpu
Disk
Expand
Process
Node
Monitor
\Newyork
Cpu
Disk
Expand
Process
App
ASAP
Extension
\Newyork
AsapXmon
App1
App2
App3
DISK ON
\CHICAGO MONITOR
APP ON
\NEWYORK MONITOR
68
ASAP CI - STATUS Collect
 +status collect
 \CENTDIV Primry Backup Pri Access
















Reqs Lmsgs Created ReqTime SrvTime Et
--------- ------ ------ --- ------- ----- ----- -------- ------- ------- --$ZOOS V02 1,122 0,106 160 255,255 22581
2 7/10 20 1404:53 1404:53
0
$CO.ASAPDB2.DBSYS Open(0)
$CO.ASAPDB2.DBCPU Open(0)
$CO.ASAPDB2.DBEXP Open(0)
$CO.ASAPDB2.DBPCB Open(0)
$CO.ASAPDB2.DBRDF Open(0)
$CO.ASAPDB2.DBNCP Open(0)
$CO.ASAPDB2.DBAPP Open(0)
$CO.ASAPDB2.DBDSK Open(0)
$CO.ASAPDB2.DBFIL Open(0)
$CO.ASAPDB2.DBSPL Open(0)
$CO.ASAPDB2.DBTAP Open(0)
$CO.ASAPDB2.DBTMF Open(0)
$CO.ASAPDB2.DBPRO Open(0)
(rate 1, sleep 0000,0000, clean 0000, retain NONE)
69
ASAP CI - STATUS Monitor
STATUS MONITOR - Displays Status of Monitor and SGP Components.
+STATUS MONITOR















\CENTDIV Primry Backup Pri Access
--------- ------ ------ --- ------$ZOOM V02 1,125 0,189 160 255,255
$ZOO0 V02 0,170
160 255,255
$ZOO1 V02 1,121
160 255,255
$ZOOG V02 1,126 NCP
160 255,255
$ZOOH V02 1,096 APP
160 255,255
$ZOOJ V02 1,165 DSK
160 255,255
$ZOOK V02 1,161 EXP
160 255,255
$ZOOL V02 1,148 FIL
160 255,255
$ZOOO V02 1,099 SPL
160 255,255
$ZOOQ V02 1,132 TAP
160 255,255
$ZOOR V02 1,160 TMF
160 255,255
$ZOOT V02 1,101 PRO
160 255,255
(collect \CENTDIV.$ZOOS, rate 1)
Reqs Lmsgs Created ReqTime SrvTime Et
----- ----- -------- ------- ------- --7604
7 6/16 07 1345:59 1345:59
0
15214
1 6/16 07 1345:59 1345:59
0
15213
1 6/16 07 1345:59 1345:59
0
7601
3 6/16 07 1345:59 1345:59
0
6508
957 6/16 07 1345:59 1345:59
0
7601
3 6/16 07 1345:59 1345:59
0
7741
4 6/16 07 1345:59 1345:59
0
7596
7 6/16 07 1345:59 1345:59
0
7600
3 6/16 07 1345:59 1345:59
0
7597
5 6/16 07 1345:59 1345:59
0
7598
5 6/16 07 1345:59 1345:59
0
7601
2 6/16 07 1345:59 1345:59
0
70
ASAP CI - LOG Command
















01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
01/06/16
0701:57
0701:57
0702:03
0702:04
0702:05
0702:05
0702:06
0702:08
0702:09
0702:10
0702:12
0702:13
0702:15
0702:35
0702:39
0702:53
3001
1022
1023
1023
1023
1023
1023
1023
1023
1023
1023
1023
1023
1881
1881
1720
ZOOM INFO
ZOOM INFO
ZOO0 INFO
ZOO1 INFO
ZOOG INFO
ZOOH INFO
ZOOJ INFO
ZOOK INFO
ZOOL INFO
ZOOO INFO
ZOOQ INFO
ZOOR INFO
ZOOT INFO
ZOOH0INFO
ZOOH1INFO
ZOOJ INFO
NonStop Backup Created. Cpu:
MONITOR V02.00 (29JUN2001) started
SGP
V02.00 (29JUN2001) started
SGP
V02.00 (29JUN2001) started
SGP NCP V02.00 (29JUN2001) started
SGP APP V02.00 (29JUN2001) started
SGP DSK V02.00 (29JUN2001) started
SGP EXP V02.00 (29JUN2001) started
SGP FIL V02.00 (29JUN2001) started
SGP SPL V02.00 (29JUN2001) started
SGP TAP V02.00 (29JUN2001) started
SGP TMF V02.00 (29JUN2001) started
SGP PRO V02.00 (29JUN2001) started
APP V02.00 (29JUN2001) started
APP V02.00 (29JUN2001) started
ASAPDSK ZASPZOO started.
Notes:
1. All ASAP Exceptions are logged in Tandem EMS Event log.
2. Asap Messages can be found in the Asap Messages Manual
71
ASAP CI - Database Maintenance Commands
 SET RETAIN – Controls what the ASAP Server does at
“Cleantime”.
SET RETAIN ALL
NONE
ROLLOVER
<record count>
 SET CLEANTIME – Controls when the DB Cleanup occurs.
SET CLEANTIME 2215
 CLEANUP – Command Manually invokes ASAP Database
cleanup.
72
CLEANUP COLLECT
ASAP CI - Time Synchronization Commands
PC
Host
Remote Hosts
• SET SYNC <Minutes>,<Frequency>
Automatically Causes Monitor node(s) to Sync to Collect node.
<Minutes> specifies interval in modulo minutes past midnight.
<Frequency> specifies the number of times to do sync.
Example: SET SYNC 60,2 syncs time at 1:00 and 2:00 AM.
• SYNC \Node Command
Manually causes \Node to Sync to Collect node.
to Sync to COLLECT node Time-of-day.
 SET SYNCSLOW ON|OFF
Defines the clock synchronization algorithm.
73
ASAP CI - Entity Commands
• Entity Commands provide reporting of availability.
• Used for batch reporting & trouble-shooting of statistic values.
APP
Reports APPLICATION availability.
CPU
Reports CPU availability.
DISK
Reports DISK availability.
FILE
Reports File availability
LH
Reports Expand Line Handler availability.
NODE
Reports Expand end-to-end availability.
PROCESS
Reports User selected Process availability.
PROCESSBUSY
Reports Busiest Process.
RDF
Reports RDF subsystem availability.
SPOOLER
Reports Spooler subsystem availability.
TAPE
Reports Tape subsystem availability.
TMF
Reports TMF subsystem availability.
74
CPU Command
CPU [/out <file>/] [\*
]
[\<node>]
[[.] * ] [, <options>]
[[.] <cpu#>]
where options is one or more of:
SAMPLES <count>
DETAIL
Displays all statistics for the specified CPU or system. Displays
high PIN PCB configuration and usage statistics for D-series
and above systems.
PERCENT
Displays the percentage of the total resource values for Memory
pages, Control blocks (PCB, PCBX, LCB, and TLE), System, &
MapPool.
USE
Displays usage statistics for Memory pages, Control blocks
(PCB, PCBX, LCB, and TLE), System, and MapPool.
CONFIGURED Displays the configured values for Memory pages, Control
blocks (PCB, PCBX, LCB, and TLE), System, and MapPool.
HISTO
Displays a histogram of CPU Busy, CPU Queue Length, and
Memory Queue length. This is the default for the CPU CMD
75
CPU Command Continued
AVG
TYPE
TIME
STATE
Displays the statistical averages across all running CPUs
for the specified system during each sample period.
Displays CPU types.
hh[:mm [m/d/y]]
Shows all attributes that have an associated state.
76
DISK Command
DISK [/out <file>/] [\*
]
[\<node>]
[[.] * ] [, <options>]
[[.] <cpu#>]
where options is one or more of:
AVG
Displays the largest statistic valued for the entire device.
CPU
Lists stats Primaried in the CPU as specified by CPU number.
INFO
Device information Capacity, MB avail, Address, and state info.
PERCENT Statistic percentage for the $vol-p & $vol-m disk drives.
QUEUE
Queue length for $vol-p & $vol-m.
RATE
Statistics per second for the $vol-p & $vol-m disk drives.
SAMPLES Number of samples to display.
STATE
Show all attributes that have an associated state. Works with the
options, rate, queue, and without any addtional options.
TIME
Show stats starting at a time other than the current time.
77
FILE Command
FILE [/out <file>/] [\*
] [[.] * ] [, <options>]
[\<node>] [[.] domain ]
where options is one or more of:
COUNT
Maximum number of subdomains to display.
EXACT
Shows statistics for only the specified domain.
MINSTATE Displays files in a subvolume, depending on the selected option:
– states Shows files with a state greater than or equal to state
– AUTO Shows files with a state higher than 2, or else shows all files
– AUTOSHORT Shows files with a state higher than 2, or else shows the
subvolume record.
DETAIL
Shows all available statistics attributes, without states.
SAMPLES Number of samples to display.
STATE
Show all attributes that have an associated state. Works with the
options, rate, queue, and without any addtional options.
TIME
Show stats starting at a time other than the current time.
78
LH Command
LH [/out <file>/] [\*
]
[\<node>]
[[.] * ] [, <options>]
[[.] <cpu#>]
where options is one or more of:
INFO
Device information Transport, LDEV, NextSys, and operational
state
AVG
Displays Level 2 information/supervisory (I/S) frames sent and
received and I/S frame ratios.
HISTO
Displays a histogram of the message size distribution.
IP
Displays the Expand statistics for Expand lines configured
using either the IP transport or the ATM transport.
LINE
Displays only Expand line handlers for subtype 0, 2, 3, 4, and
subtype 6.
PATH
Displays Expand statitistics only for Expand multi line Path
process subtype 1.
POOL
Displays Pool use.
RATES
Displays counts normalized to number per second.
SAMPLES Number of samples to display.
79
LH Command Continued
STATE
TIME
USE
Show all attributes that have an associated state.
Works with the options, rate, queue.
Show stats starting at a time other than the current time.
Displays statistics about current pool usage.
80
NODE Command
NODE [/out <file>/] [\*
] [[.] * ] [, <options>]
[\<node>] [[.] nodename ]
where options is one or more of:
NONULLOUT Displays only Nodes with nonzero end-to-end stats
SAMPLES
Number of samples to display.
TIME
Show stats starting at a time other than the current time.
81
PROCESS Command
PROCESS [/out <file>/] [\*
] [[.] * ] [, <options>]
[\<node>] [[.] <$Process>]
where options is one or more of:
CPU
Returns information only for all processes on the specified
CPU.
DETAIL
Returns more detailed information about the specified
monitored processes.
SAMPLES Number of samples to display.
STATE
Show all attributes that have an associated state.
TIME
Show stats starting at a time other than the current time.
82
PROCESSBUSY / PB Command
PROCESSBUSY | PB [/out <file>/] [\*
] [[.] *
[\<node>] [[.] <CPU#>]
] [, <options>]
where options is one or more of:
ENTIRIES Displays the number of busy processes to be displayed for
each CPU.
INFO
Displays detailed processbusy availability attributes.
STATS
Displays detailed processbusy availability attributes
SAMPLES Number of samples to display.
STATE
Show all attributes that have an associated state.
TIME
Show stats starting at a time other than the current time.
83
RDF Command
RDF [/out <file>/] [\*
] [[.] * ] [, <options>]
[\<node>] [[.] <domain>]
where options is one or more of:
CPU
Displays RDF domain/metric values in the specified CPU
DETAIL
Displays RDF Metric values based on FORMAT command
settings.
SAMPLES Number of samples to display.
STATE
Displays RDF Metric values and their objective states.
TIME
Show stats starting at a time other than the current time.
VOLUME Displays the associated disk volumes.
84
Spooler Command
SPOOLER [/out <file>/] [\* ]
[[.] *
]
[, <options>]
[\<node>] [[.] <spoolerspec>]
where options is one or more of:
DETAIL
Shows detailed information for the specified spooler domain
(supervisor, collector, device, print process).
EXACT
Returns information about domains which exactly match
spoolerspec.
MINSTATE Shows detailed information on subdomains with states greater than
or equal to what is specified.
– states Minimum state to report.
– AUTO Shows files with a state minimum or higher than 2.
– AUTOSHORT indicates to return aggregate information where
state is greater than or equal to 2
SAMPLES Number of samples to display.
SHORT
When used with DETAIL or MINSTATE, displays
information in short form.
STATES
Displays Spooler Metric values and their objective states.
85
Spooler Command Continued
TIME
Show stats starting at a time other than the current time.
 To get spooler detail information in the ASAP client, use SHOW DETAIL
INFORMATION
86
Tape Command
TAPE [/out <file>/] [\*
] [[.] * ] [, <options>]
[\<node>] [[.] <tapespec>]
where options is one or more of:
DETAIL
Display detailed tapemount information for the specified tape
domain.
SAMPLES Number of records to display.
STATES Display states associated with tape attributes.
TIME
Show stats starting at a time other than the current time.
EXACT
Retrieve information only which exactly match tapespec.
 To get tape mount information in the ASAP client, use SHOW
DETAIL INFORMATION
87
TMF Command
TMF [/out <file>/] [\*
] [[.] * ] [, <options>]
[\<node>] [[.] <Domain>]
where options is one or more of:
DETAIL
Display detailed information for the specified domain, without
states.
MINSTATE Shows detailed information on subdomains with states
greater than or equal to what is specified.
– states Minimum state to report.
– AUTO indicates to use state 2 as the minimum.
– AUTOSHORT indicates to return aggregate information where
state is greater than or equal to 2
SAMPLES Number of records to display.
STATES
Display states associated with TMF attributes.
TIME
Show stats starting at a time other than the current time.
88
ASAP CI - Basic Commands
EXIT
Stops the ASAP command interpreter.
FC
Standard Tandem Fix Command.
HELP
Displays explanation of specified ASAP command.
NEW FEATURES Enter HELP NEW FEATURES for new features
NEW USER
Enter HELP NEW USER for getting started.
OBEY
Causes commands in OBEY file to be executed.
PAUSE
Suspends program until stop/abend/brk msg.
SYSTEM
Specifies default system name.
VOLUME
Changes and/or Displays default volume name.
!
Exclamation Mark is End-of-line Comment Delimeter.
89