Transcript Introduction to Digital Receivers

Press any
key to
continue
Software Radio Solutions
BAE Systems and Pentek
1
Software Radio System Blocks
BAE Systems tuners and receivers complement Pentek software radio products.
BAE tuners offer both analog IF and digital IF products directly compatible with
Pentek A/D converters and digital receivers.
RECEIVE
ANTENNA
WORK
STATION
DIGITAL
BAE SYSTEMS
ANALOG RF
TUNER or
ANALOG
RECEIVER
WORK
STATION
AUDIO
PENTEK
A/D
CONVERTER
PENTEK
DIGITAL
RECEIVER
PENTEK
DSP
NETWORK • SWITCH • BUS •
EMBEDDED CONTROLLER •
WIRELESS BASESTATION ROUTER
PENTEK
A/D
CONV
PENTEK
DSP
PENTEK
DIGITAL UP
CONVERTER
PENTEK
D/A
CONVERTER
PENTEK
D/A
CONV
AUDIO
DISK / TAPE
TRANSMIT
ANTENNA
ANALOG RF
UP CONVERTER
DISK / TAPE
2
Analog IF Product Compatibility
BAE tuners and receivers with analog IF outputs are shown on the left, while
Pentek software radio products with compatible analog inputs are shown on the
right.
BAE Analog Out Receivers & Tuners
Pentek Analog Input Products
WJ-8604
WJ-8607
WJ-8609
WJ-8611
WJ-8621
WJ-8633
WJ-8634
SI-8614
WJ-8654
WJ-8655
SI- 9111
WJ-9119
WJ-9117
WJ-9127
SI-9136
SI-9137
6402
6410
6420
6441
6465
6472
6210
6211
6216
6230
6231
6235
7131
VHF/UHF Miniceptor
VHF/UHF Miniceptor
VHF/UHF Miniceptor
Digital HF/VHF/UHF Receiver
VHF/UHF VXIceptor
VHF/UHF Receiver
VXI HF/VHF/UHF Receiver
VHF/UHF Nanoceptor
HF/VHF/UHF Microceptor
Miniature VHF/UHF Receiver
Direct HF Tuner
HF Tuner
Dual VME Tuner
Dual HF Tuner
Dual VME Tuner
Dual VME Tuner
Dual Chan 250 kHz 16-bit A/D
Dual Chan 10 MHz 16-bit A/D
Dual Chan 20 MHz 14- or 16-bit A/D
Dual Chan 41 MHz 12-bit A/D
Dual Chan 65 MHz 12-bit A/D
Dual Chan 70 MHz 10-bit A/D
Dual Chan NB Receiver & A/D - VIM-2
Dual Chan 65 MHz 12-bit A/D - VIM-2
Dual Chan WB Receiver & A/D - VIM-2
32 Chan NB Receiver, A/D, & FPGA - VIM-4
16 Chan NB Receiver, A/D, & FPGA - VIM-2
Dual Chan WB Receiver, A/D & FPGA - VIM-2
16 Chan Receiver, A/D, & FPGA - PMC
3
Analog IF Tuner + ‘C40 DSP
Analog IF outputs from BAE Systems tuners can be digitized by Pentek 64xx
series dual channel A/D converters which drive 8, 16, or 32 channel narrow band
digital receivers with C40 comm port outputs suitable for C40 processor boards.
BAE SYSTEMS
Tuners and Receivers
SI-9111
SI-9117
SI-9136
SI-9137
6U VMEbus
Direct HF
Dual VHF/UHF
Dual VHF/UHF
Dual VHF/UHF
WJ-8621
WJ-8633
WJ-8634
SI-9119
SI-9127
C-size VXIbus
VHF/UHF VXIceptor
VHF/UHF Receiver
HF/VHF/UHF
HF Tuner
Dual HF Tuner
WJ-8604
WJ-8607
WJ-8609
WJ-8611
SI-8614
WJ-8654
WJ-8655
Chassis
VHF/UHF Miniceptor
VHF/UHF Miniceptor
VHF/UHF Miniceptor
Digital HF/VHF/UHF
VHF/UHF Nanoceptor
HF/VHF/UHF µceptor
Mini VHF/UHF
Analog IF
PENTEK
2 Channel A/D’s
6U VMEbus
6402 250 kHz 16-bit
6410 10 MHz 16-bit
6420 20 MHz 14-bit
6420 20 MHz 16-bit
6441 41 MHz 12-bit
6465 65 MHz 12-bit
6472 70 MHz 10-bit
Differential
ECL
FPDP
PENTEK
Digital Receivers
6U VMEbus
6508 8 Ch DDR
6509 8 Ch DDR
6510 8 Ch DDR
6514 16 Ch DDR
6516 16 Ch DDR
6532 32 Ch DDR
C40 Comm Port
C40
Comm
Port
PENTEK
C40 Processors
6U VMEbus
4284 Single C40
4269 Dual C40
4270 Quad C40
4285 Octal C40
4
Analog IF Tuner + C6000 / PowerPC
The Model 6223 C40 Comm Port Adapter VIM-2 mezzanine module allows the
same A/D and digital receivers on the previous slide to be attached to the C6000
and G4 PowerPC processor boards.
BAE SYSTEMS
Tuners and Receivers
SI-9111
SI-9117
SI-9136
SI-9137
6U VMEbus
Direct HF
Dual VHF/UHF
Dual VHF/UHF
Dual VHF/UHF
WJ-8621
WJ-8633
WJ-8634
SI-9119
SI-9127
C-size VXIbus
VHF/UHF VXIceptor
VHF/UHF Receiver
HF/VHF/UHF
HF Tuner
Dual HF Tuner
WJ-8604
WJ-8607
WJ-8609
WJ-8611
SI-8614
WJ-8654
WJ-8655
Chassis
VHF/UHF Miniceptor
VHF/UHF Miniceptor
VHF/UHF Miniceptor
Digital HF/VHF/UHF
VHF/UHF Nanoceptor
HF/VHF/UHF µceptor
Mini VHF/UHF
Analog IF
PENTEK
2 Channel A/D’s
6U VMEbus
6402 250 kHz 16-bit
6410 10 MHz 16-bit
6420 20 MHz 14-bit
6420 20 MHz 16-bit
6441 41 MHz 12-bit
6465 65 MHz 12-bit
6472 70 MHz 10-bit
Differential
ECL
PENTEK
VIM-2 Module
6223 Comm Port I/F
FPDP
PENTEK
Digital Receivers
6U VMEbus
6508 8 Ch DDR
6509 8 Ch DDR
6510 8 Ch DDR
6514 16 Ch DDR
6516 16 Ch DDR
6532 32 Ch DDR
VIM
PENTEK
VIM Processors
6U VMEbus
4290 Quad C6201
4291 Quad C6701
4292 Quad C6203
4293 Octal C6203
4294 Quad G4 PPC
5
Analog IF Tuner + C6000 / PowerPC
The same A/D converters can use their FPDP outputs to connect through the
Model 6226 or 6250 FPDP Adapters for delivering A/D data to the C6000 and G4
PowerPC processor boards. The 6250 features two Xilinx Virtex-II FPGA’s.
BAE SYSTEMS
Tuners and Receivers
SI-9111
SI-9117
SI-9136
SI-9137
6U VMEbus
Direct HF
Dual VHF/UHF
Dual VHF/UHF
Dual VHF/UHF
WJ-8621
WJ-8633
WJ-8634
SI-9119
SI-9127
C-size VXIbus
VHF/UHF VXIceptor
VHF/UHF Receiver
HF/VHF/UHF
HF Tuner
Dual HF Tuner
WJ-8604
WJ-8607
WJ-8609
WJ-8611
SI-8614
WJ-8654
WJ-8655
Chassis
VHF/UHF Miniceptor
VHF/UHF Miniceptor
VHF/UHF Miniceptor
Digital HF/VHF/UHF
VHF/UHF Nanoceptor
HF/VHF/UHF µceptor
Mini VHF/UHF
Analog IF
PENTEK
2 Channel A/D’s
6U VMEbus
6402 250 kHz 16-bit
6410 10 MHz 16-bit
6420 20 MHz 14-bit
6420 20 MHz 16-bit
6441 41 MHz 12-bit
6465 65 MHz 12-bit
6472 70 MHz 10-bit
FPDP
FPDP
PENTEK
FPDP VIM-2 Modules
6226 Dual FPDP
6250 Dual FPDP + FPGA
VIM
PENTEK
VIM Processors
6U VMEbus
4290 Quad C6201
4291 Quad C6701
4292 Quad C6203
4293 Octal C6203
4294 Quad G4 PPC
6
Analog IF Tuner Classification System
By adding the Model 6099A Digital Delay Memory to the previous slide, signals
can be classified by the DSP using the undelayed data. The delay path allows
time for signal classification so that only signals of interest need to be stored.
BAE SYSTEMS
Tuners and Receivers
SI-9111
SI-9117
SI-9136
SI-9137
6U VMEbus
Direct HF
Dual VHF/UHF
Dual VHF/UHF
Dual VHF/UHF
WJ-8621
WJ-8633
WJ-8634
SI-9119
SI-9127
C-size VXIbus
VHF/UHF VXIceptor
VHF/UHF Receiver
HF/VHF/UHF
HF Tuner
Dual HF Tuner
WJ-8604
WJ-8607
WJ-8609
WJ-8611
SI-8614
WJ-8654
WJ-8655
Chassis
VHF/UHF Miniceptor
VHF/UHF Miniceptor
VHF/UHF Miniceptor
Digital HF/VHF/UHF
VHF/UHF Nanoceptor
HF/VHF/UHF µceptor
Mini VHF/UHF
Analog IF
PENTEK
2 Channel A/D’s
6U VMEbus
6402 250 kHz 16-bit
6410 10 MHz 16-bit
6420 20 MHz 14-bit
6420 20 MHz 16-bit
6441 41 MHz 12-bit
6465 65 MHz 12-bit
FPDP
PENTEK
Delay Memory
6U VMEbus
6099A 512 MBytes
FPDP
Undelayed FPDP
Delayed FPDP
PENTEK
FPDP VIM Modules
6226 Dual FPDP
6250 Dual FPDP + FPGA
VIM
PENTEK
VIM Processors
6U VMEbus
4290 Quad C6201
4291 Quad C6701
4292 Quad C6203
4293 Octal C6203
4294 Quad G4 PPC
7
Analog IF Tuner Tracking Receiver
The same system can substitute the Model 6232 32-Channel Receiver VIM-4.
Energy detection on the wideband undelayed signals uses the DDR bypass path.
Delayed signals can then be de-hopped by pre-tuning the receiver channels.
BAE SYSTEMS
Tuners and Receivers
SI-9111
SI-9117
SI-9136
SI-9137
6U VMEbus
Direct HF
Dual VHF/UHF
Dual VHF/UHF
Dual VHF/UHF
WJ-8621
WJ-8633
WJ-8634
SI-9119
SI-9127
C-size VXIbus
VHF/UHF VXIceptor
VHF/UHF Receiver
HF/VHF/UHF
HF Tuner
Dual HF Tuner
WJ-8604
WJ-8607
WJ-8609
WJ-8611
SI-8614
WJ-8654
WJ-8655
Chassis
VHF/UHF Miniceptor
VHF/UHF Miniceptor
VHF/UHF Miniceptor
Digital HF/VHF/UHF
VHF/UHF Nanoceptor
HF/VHF/UHF µceptor
Mini VHF/UHF
Analog IF
PENTEK
2 Channel A/D’s
6U VMEbus
6402 250 kHz 16-bit
6410 10 MHz 16-bit
6420 20 MHz 14-bit
6420 20 MHz 16-bit
6441 41 MHz 12-bit
6465 65 MHz 12-bit
FPDP
PENTEK
Delay Memory
6U VMEbus
6099A 512 MBytes
FPDP
Undelayed FPDP
Delayed FPDP
PENTEK
DDR VIM Module
6232 32 CH DDR
(DDR bypass path)
VIM
PENTEK
VIM Processors
6U VMEbus
4290 Quad C6201
4291 Quad C6701
4292 Quad C6203
4293 Octal C6203
4294 Quad G4 PPC
8
Analog IF Tuner + VIM
Pentek’s VIM mezzanines offer both A/D and DDR functions in a single module for
direct connection to C6000 and PowerPC processor boards. These “channelized”
single-slot, 6U sub-systems contain the entire signal processing chain.
BAE SYSTEMS
Tuners and Receivers
SI-9111
SI-9117
SI-9136
SI-9137
6U VMEbus
Direct HF
Dual VHF/UHF
Dual VHF/UHF
Dual VHF/UHF
WJ-8621
WJ-8633
WJ-8634
SI-9119
SI-9127
C-size VXIbus
VHF/UHF VXIceptor
VHF/UHF Receiver
HF/VHF/UHF
HF Tuner
Dual HF Tuner
WJ-8604
WJ-8607
WJ-8609
WJ-8611
SI-8614
WJ-8654
WJ-8655
Chassis
VHF/UHF Miniceptor
VHF/UHF Miniceptor
VHF/UHF Miniceptor
Digital HF/VHF/UHF
VHF/UHF Nanoceptor
HF/VHF/UHF µceptor
Mini VHF/UHF
Analog IF
6210
6211
6216
6230
6231
6235
PENTEK
A/D and Receiver
VIM Mezzanines
2 Ch 65 MHz A/D
2 Ch A/D + 2 Ch DDR
2 Ch A/D + 2 Ch DDR
4 Ch A/D + 32 Ch DDR
2 Ch A/D + 16 Ch DDR
2 Ch A/D + 2 Ch DDR
VIM
PENTEK
VIM Processors
6U VMEbus
4290 Quad C6201
4291 Quad C6701
4292 Quad C6203
4293 Octal C6203
4294 Quad G4 PPC
9
Analog IF Tuner + PMC
For systems requiring less processing power, the Model 7131 16-Channel Digital
Receiver and A/D PMC module can be attached to general purpose PMC
processor platforms for VME, CompactPCI and PCI.
BAE SYSTEMS
Tuners and Receivers
SI-9111
SI-9117
SI-9136
SI-9137
6U VMEbus
Direct HF
Dual VHF/UHF
Dual VHF/UHF
Dual VHF/UHF
WJ-8621
WJ-8633
WJ-8634
SI-9119
SI-9127
C-size VXIbus
VHF/UHF VXIceptor
VHF/UHF Receiver
HF/VHF/UHF
HF Tuner
Dual HF Tuner
WJ-8604
WJ-8607
WJ-8609
WJ-8611
SI-8614
WJ-8654
WJ-8655
Chassis
VHF/UHF Miniceptor
VHF/UHF Miniceptor
VHF/UHF Miniceptor
Digital HF/VHF/UHF
VHF/UHF Nanoceptor
HF/VHF/UHF µceptor
Mini VHF/UHF
Analog IF
PENTEK
A/D and Receiver
PMC Mezzanines
7131 2 Ch A/D + 16 Ch DDR
PMC
General Purpose
Processor Platforms
6U / 3U VMEbus
6U / 3U CompactPCI
Desktop PCI
10
Digital IF Product Compatibility
BAE tuners and receivers containing an A/D converter with differential ECL digital
IF outputs are shown on the left. Pentek software radio products with
compatible differential ECL digital inputs are shown on the right.
BAE Digital Out Tuners & Receivers
Pentek Digital Input Products
WJ-9104 Multichannel Digital Tuner
WJ-9107 Wideband Telecom
6509 8 Chan - 2 Input - Comm Port Out
6514 16 Chan - 2 Input- Comm Port Out
6526 16 Chan - 2 Input - RACEway Out
6532 32 Chan - 4 Input- Comm Port Out
4271 4 Channel Narrowband - MIX
4272 2 Chan Narrowband \ 1 Chan Wideband - MIX
6099A 512 MB Memory Delay Buffer
11
Digital IF Tuner + C40
Three Pentek digital receivers with 8, 16, and 32 channels of DDR accept the
differential ECL outputs from BAE tuners. Receiver outputs are connected to C40
processor boards using front panel C40 comm ports.
BAE SYSTEMS
Tuners and Receivers
C-size VXIbus
WJ-9107 Wideband Telecom Tuner
Chassis
WJ-9104 Multichannel Digital Tuner
Differential
ECL Digital
PENTEK
Digital Receivers
6U VMEbus
6509 8 Ch DDR
6514 16 Ch DDR
6532 32 Ch DDR
C40 Comm
Ports
PENTEK
C40 Processors
6U VMEbus
4284 Single C40
4269 Dual C40
4270 Quad C40
4285 Octal C40
12
Digital IF Tuner + C6x or PowerPC
The same receivers can be connected to C6000 or PowerPC processors by using
the Model 6223 C40 Comm Port Adapter VIM-2 mezzanine module.
BAE SYSTEMS
Tuners and Receivers
C-size VXIbus
WJ-9107 Wideband Telecom Tuner
Chassis
WJ-9104 Multichannel Digital Tuner
Differential
ECL Digital
PENTEK
Digital Receivers
6U VMEbus
6509 8 Ch DDR
6514 16 Ch DDR
6532 32 Ch DDR
C40 Comm Ports
PENTEK
VIM-2 Module
6223 Comm Port I/F
VIM
PENTEK
VIM Processors
6U VMEbus
4290 Quad C6201
4291 Quad C6701
4292 Quad C6203
4293 Octal C6203
4294 Quad G4 PPC
13
Digital IF Tuner + RACEway
The Model 6526 RACEway receiver accepts two differential ECL inputs from BAE
tuners and delivers 16 narrow band receiver channels over RACEway to
RACEway-compatible processor boards for C40, C6000, or PowerPC.
BAE SYSTEMS
Tuners and Receivers
C-size VXIbus
WJ-9107 Wideband Telecom Tuner
Chassis
WJ-9104 Multichannel Digital Tuner
Differential
ECL Digital
PENTEK
Digital Receivers
6U VMEbus
6526 16 Ch DDR
RACEway
PENTEK
RACEway DSP
6U VMEbus
4285 Octal C40
4290 Quad C6201
4291 Quad C6701
4292 Quad C6203
4293 Octal C6203
4294 Quad G4 PPC
14
Digital IF Tuner Classification System
Using the Model 6099A as a ECL-to-FPDP translator, this system achieves the
same signal classification system described earlier.
BAE SYSTEMS
Tuners and Receivers
C-size VXIbus
WJ-9107 Wideband Telecom Tuner
Differential
ECL Digital
PENTEK
ECL to FPDP I/F
6U VMEbus
6099 64 MBytes
FPDP
Chassis
WJ-9104 Multichannel Digital Tuner
PENTEK
Delay Memory
6U VMEbus
6099A 512 MBytes
FPDP
Undelayed FPDP
Delayed FPDP
PENTEK
FPDP VIM Modules
6226 Dual FPDP
6250 Dual FPDP + FPGA
VIM
PENTEK
VIM Processors
6U VMEbus
4290 Quad C6201
4291 Quad C6701
4292 Quad C6203
4293 Octal C6203
4294 Quad G4 PPC
15
Digital IF Tuner Tracking Receiver
Substitute the Model 6232 32-Channel Digital Receiver VIM-4 module for energy
detection on the wideband undelayed signals using the DDR bypass path.
Delayed signals can then be de-hopped by pre-tuning the receiver channels.
BAE SYSTEMS
Tuners and Receivers
C-size VXIbus
WJ-9107 Wideband Telecom Tuner
Differential
ECL Digital
PENTEK
ECL to FPDP I/F
6U VMEbus
6099 64 MBytes
FPDP
Chassis
WJ-9104 Multichannel Digital Tuner
PENTEK
Delay Memory
6U VMEbus
6099A 512 MBytes
FPDP
Undelayed FPDP
Delayed FPDP
PENTEK
DDR VIM Module
6232 32 CH DDR
(DDR bypass path)
VIM
PENTEK
VIM Processors
6U VMEbus
4290 Quad C6201
4291 Quad C6701
4292 Quad C6203
4293 Octal C6203
4294 Quad G4 PPC
16
Quad A/D, 32-Chan Receiver & DSP
This channelized receiver sub-system using the Model 6230 VIM-4 Receiver and
Model 4294 Quad G4 PowerPC contains 4 A/D converters, 32 narrow band digital
receivers, two FPGAs, four PowerPC’s and a RACE++ interface in one VME slot!
Quad
Recvr
Quad
Recvr
BAE SYSTEMS
ANALOG RF
TUNER or
RECEIVER
80 MHz
14-bit A/D
Quad
Recvr
Quad
Recvr
BAE SYSTEMS
ANALOG RF
TUNER or
RECEIVER
BAE SYSTEMS
ANALOG RF
TUNER or
RECEIVER
80 MHz
14-bit A/D
Quad
Recvr
Quad
Recvr
80 MHz
14-bit A/D
Quad
Recvr
Quad
Recvr
Xilinx Virtex-E FPGA
80 MHz
14-bit A/D
VIM
PENTEK 4294
Quad PowerPC
MPC7400
PowerPC
VIM
MPC7400
PowerPC
RACE++
Interface
Xilinx Virtex-E FPGA
BAE SYSTEMS
ANALOG RF
TUNER or
RECEIVER
PENTEK 6230 VIM-4
32 Chan Receiver
VIM
RACE++
267 MB/sec
MPC7400
PowerPC
VIM
MPC7400
PowerPC
VMEbus
17
RACEway Direction Finding System
Multiple receivers tuned to a single source can send time-stamped RACEway
packets across the RACE++ fabric to DSPs employing the DF algorithms. The
system is highly scalable for numbers of channels and DSP processors.
A/D
Recvr
PPC
PPC
FPGA
BAE
Tuner
Analog IF
BAE
Tuner
Analog IF
A/D
Recvr
A/D
Recvr
PPC
PPC
FPGA
A/D
Recvr
A/D
Recvr
PPC
PPC
FPGA
BAE
Tuner
Analog IF
BAE
Tuner
Analog IF
A/D
Recvr
A/D
Recvr
PPC
PPC
FPGA
A/D
Recvr
PPC
A/D
Recvr
PPC
A/D
Recvr
A/D
Recvr
FPGA
BAE
Tuner
Analog IF
BAE
Tuner
Analog IF
PPC
PPC
FPGA
A/D
Recvr
A/D
Recvr
A/D
Recvr
PPC
PPC
FPGA
PPC
RACE++ I/F
Recvr
RACE++ I/F
A/D
PowerPC or
DSP Boards
RACE++ I/F
FPGA
RACE++ I/F
PPC
Recvr
RACE++ I/F
BAE
Tuner
Analog IF
A/D
RACE++ I/F
Analog IF
RACE++ I/F
BAE
Tuner
RACE++ ILKP
RACE++ I/F
DDR Sub-Systems
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
PPC
18
Analog IF Tracking Receiver System
Wideband A/D data (red) flows directly to the PowerPC for FFT energy detection.
Digital receivers are pre-tuned (green) so that when the delayed A/D data
arrives, signals can be dehopped and delivered for demodulation (blue).
Dual
Channel
Analog
Analog
IF
IF
Tuner
CH 1 IN
EXT
CLK
CH 2 IN
FPDP
41 MHz
12-bit A/D
Quad
DDR
CLOCK
GEN
Quad
DDR
Quad
DDR
41 MHz
12-bit A/D
Quad
DDR
FPDP
FPDP
256 MB
BUFFER
256 MB
BUFFER
FPDP
PENTEK 6099A
512 MB Delay
Quad
DDR
Quad
DDR
PENTEK 4294
Quad PowerPC
MPC7400
PowerPC
VIM
MPC7400
PowerPC
RACE++
Interface
VIM
Quad
DDR
Quad
DDR
FPDP
VIM
Xilinx Virtex-E FPGA
Analog
IF
PENTEK 6232 VIM
32 Chan Receiver
Xilinx Virtex-E FPGA
BAE Systems
PENTEK 6441
12-bit 41 kHz
2 Chan A/D
RACE++
267
MB/sec
MPC7400
PowerPC
VIM
MPC7400
PowerPC
19
Digital IF Tracking Receiver System
This tracking receivers uses the 6250 FPGAs to compute real time FFTs for
energy detection and tuning of the receivers in the 6232 so that delayed signals
can be de-hopped. RACE++ joins the three processors for signal routing.
ECL
32
MB
32
MB
32
MB
FPDP
FPDP
Virtex-II
3M
Gate
FPGA
Virtex-II
3M
Gate
FPGA
VIM
MPC7400
PowerPC
MPC7400
PowerPC
VIM
PENTEK 4294
Quad PowerPC
MPC7400
PowerPC
MPC7400
PowerPC
RACE++
MPC7400
PowerPC
PENTEK 6232
32 Chan Recvr
Pentek 6099A
Memory Buffer
256
MB
256
MB
GC4016
FPDP
GC4016
GC4016
GC4016
GC4016
256
MB
256
MB
FPDP
GC4016
GC4016
GC4016
VIM
RACE++ Interface
32
MB
RACE++ Interface
WJ-9104
WJ-9107
Tuner
ECL
PENTEK 4294
Quad PowerPC
MPC7400
PowerPC
MPC7400
PowerPC
MPC7400
PowerPC
PENTEK 4294
Quad PowerPC
RACE++
ILKP
Crossbar
MPC7400
PowerPC
MPC7400
PowerPC
MPC7400
PowerPC
RACE++ Interface
WJ-9104
WJ-9107
Tuner
PENTEK 6250
FPDP + FPGA
Pentek 6099A
Memory Buffer
BAE Systems
RACE++
MPC7400
PowerPC
20
For More Information….
 Pentek




www.pentek.com
One Park Way, Upper Saddle River, NJ 07458
Tel: 201-818-5900
Email: [email protected]
 BAE Systems Gaithersburg




www.signalsurveillance.com
700 Quince Orchard Rd, Gaithersburg, MD 20878
Tel: 301-948-7550
Email: [email protected]
21