Second and Third Civil GPS Signals

Download Report

Transcript Second and Third Civil GPS Signals

L5 Signal Characteristics
Dr. A.J. Van Dierendonck, AJ Systems
Dr. Chris Hegarty, MITRE
Co-chairs RTCA SC159 WG1
GPS L2/L5 Industry Day
May 2, 2001
2
Topics
•
•
•
•
•
•
L5 Signal Design Status
Characteristics Summary
PN Code Structure and Properties
Signal Modulation
Data Structure
Data Content
3
L5 Signal Design Status
• Signal design is complete
• RTCA SC159 published an L5 Signal Specification
– Some specification details affected by SV design included
comments
•
•
•
•
Phase Noise specification
Correlation Loss specification
Detailed Received Power specification
Inter-frequency and inter-code delays
– To be resolved in ICWG process as SV design evolves
4
L5 Characteristics - Summary
•
•
•
•
•
L5 = 1176.45 MHz
Bandwidth = 24 MHz (20 MHz null-to-null)
Minimum Received Power = -154 dBW
PN Code Chipping Rate = 10.23 MHz
QPSK Signal
– In-Phase (I) = Data Channel
– Quadraphase (Q) = Data-Free Channel
– Equal Power in I and Q (-157 dBW each)
• 50 bps data (rate 1/2 FEC encoded)
1176.45 MHz
5
L5 Codes and Code Properties
6
L5 Codes
• Codes with 2 - 13 stage shift registers
– Length of one (XA code) = 8190 chips
– Length of second (XB code) = 8191 chips
– Exclusive-Or’d together to generate longer code
• Chipping rate of 10.23 MHz
– Reset with 1 ms epochs (10,230 chips)
• Two codes per satellite (4096 available)
– One for Data channel, one for Data-Free channel
7
L5 I & Q Code Generators
Exclusive OR
Reset to all 1s on next clock
1
2
3
4
5
6
7
8
9
10
11
12
13
Decode 1111111111101
All 1's
XA(t)
XA Coder
XBI State for SV i
XIi(t)
Code Clock
1 ms Epoch
XBI(t+niTc)
Initial XBI State
Reset
XQi(t)
1
2
3
4
5
6
7
8
9
10
11
12
13
Exclusive OR
XBQ(t+niTc)
XBI Coder
XBQ State for SV i
Initial XBQ State
1
2
3
4
5
6
7
8
Exclusive OR
XBQ Coder
9
10
11
12
13
8
L5 Code Generator Timing
1 ms = 10230
8190
1
XA Code
B
0
8 1
XB Code
1 = 1111111111111
8 = 1111111111101
9 = 1111111111110
2 1
B
0
9 1
2 = State 2040
a) B0 = Initial State at 1 ms (less than State 6152)
1 ms = 10230
8190
1
XA Code
8 1
2 1
8191
B
0
9 1
1 = 1111111111111
XB Code
8 = 1111111111101
9 = 1111111111110
9 1
2 = State 2040
b) B0 = Initial State at 1 ms (greater than State 6151)
B
0
9
L5 Code Performance Summary
• 74 Codes have been selected
– 37 I, Q pairs
• Maximum non-peak autocorrelation  -30 dB
• Maximum cross-correlation with other selected codes 
-27 dB
• Average autocorrelation and cross-correlation  -42 dB
• Maximum cross-correlation between I, Q pairs < -74.2
dB
• Another pair selected as non-standard code
10
L5 Signal Modulation
11
L5 I & Q Code and Symbol Modulation
100 Hz Symbol Clock
GPS L5 Data
Messages
276 bits
Add CRC
300 bits
Encode with
FEC
100 sps
10 - symbol
Neuman-Hoffman
Code
50 Hz Data Clock
1 kbaud
XI(t)
QPSK Modulator
Composite
Signal
1 ms epochs
10.23 MHz
Code Clock
Code Generator
XQ(t)
20 - symbol
Neuman-Hoffman
Code
1 kbaud
Carrier
• (Coded) coherent carrier in-quadrature with data
– Allows for robust code & carrier tracking with narrow pre-detection
bandwidth
– Independent codes to remove QPSK tracking bias
12
Neuman-Hoffman Codes
• Encoded symbols and carrier
– Modulate at PN Code epoch rate
– Spreads PN Code 1 kHz spectral lines to 50 Hz spectral lines
(including FEC)
• Reduces effect of narrowband interference by 13 dB
– Primary purpose of NH Codes
• Reduces SV cross-correlation most of the time
• Provides more robust symbol/bit synchronization
13
1.5
1.5
1
1
0.5
0
0
1
2
3
4
5
6
7
8
-0.5
-1
9
10
Neuman-Hoffman Code Value
Neuman-Hoffman Code Value
L5 Neuman-Hoffman Codes
0.5
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
-0.5
-1
-1.5
-1.5
Code Delay - Milliseconds
10 ms Code on I
Code Delay - Milliseconds
20 ms Code on I
14
L5 Data Content & Format
15
L5 Data Content and Format
• 5 – Six-Second 300-bit Messages
– Format with 24-bit CRC (same as WAAS)
– Encoded with Rate 1/2 FEC
• To make up for 3-dB QPSK reduction
– Symbols modulated with 10-bit Neuman-Hoffman Code
• Messages scheduled for optimum receiver performance
• Lined up with L1 sub-frame epochs
16
Message Content
• Mostly, content is same as on L1
• Exceptions:
–
–
–
–
Group delay terms added
L5 Health added
Different Text Message
PRN number added
17
L5 Message Types (of 64 possible)
•
•
•
•
•
•
Message Type 1 - Ephemeris/Clock I
Message Type 2 - Ephemeris/Clock II
Message Type 3 - Ionosphere/UTC
Message Type 4 - Almanac
Message Type 5 - Text Message
Anticipated that Ephemeris/Clock Messages would be
repeated every 18-24 seconds
18
Message Type 1
DIRECTION OF DATA FLOW FROM SV
100 BITS
2 SECONDS
1
9
8 BITS
32
33
15
6
BITS
PREAMBLE
MESSAGE TYPE ID
MESSAGE
TOW COUNT*
39
PRN
6
BITS
17 BITS
49
54
55
MSB FIRST
59
73
89
WN
IDOT
Dn
Crs
10 BITS
14 BITS
16 BITS
12 MSBs
URA 5 INDEX - 4 BITS
ANTI-SPOOF FLAG - 1 BIT
L5 HEALTH - 5 BITS
"ALERT" FLAG - 1 BIT
DIRECTION OF DATA FLOW FROM SV
100 BITS
2 SECONDS
105
121
137
MSB FIRST
153
169
185
193
Crc
Cus
Cuc
Cis
Cic
TGD15
toc5
16 BITS
16 BITS
16 BITS
16 BITS
16 BITS
8 BITS
8 MSBs
Crs - 4 LSBs
DIRECTION OF DATA FLOW FROM SV
100 BITS
2 SECONDS
209
219
241
257
MSB FIRST
265
273 277
toc5
IODC
af05
af15
af25
TGD25
CRC
8 LSBs
10 BITS
22 BITS
16 BITS
8 BITS
8 BITS
24 BITS
DTIQ5 - 4 BITS
* MESSAGE TOW COUNT = 17 MSBs OF ACTUAL TOW COUNT AT START OF NEXT 6-SECOND MESSAGE
19
Message Type 2
DIRECTION OF DATA FLOW FROM SV
100 BITS
2 SECONDS
1
8 BITS
9
32
33
15
65
MESSAGE
TOW COUNT*
6
BITS
MSB FIRST
97
A
M0
32 BITS
32 BITS
17 BITS
PREAMBLE
MESSAGE TYPE ID
"ALERT" FLAG - 1 BIT
e - 4 MSBs
DIRECTION OF DATA FLOW FROM SV
100 BITS
2 SECONDS
129
MSB FIRST
161
193
e
i0
W0
w
28 LSBs
32 BITS
32 BITS
8 MSBs
DIRECTION OF DATA FLOW FROM SV
100 BITS
2 SECONDS
225
241
MSB FIRST
265
275
276
277
w
toe
&
W
IODE
CRC
24 LSBs
16 BITS
24 BITS
10 BITS
24 BITS
FIT INTERVAL FLAG - 1 BIT
* MESSAGE TOW COUNT = 17 MSBs OF ACTUAL TOW COUNT AT START OF NEXT 6-SECOND MESSAGE
RESERVED - 1 BIT
20
Group Delay Considerations
• GPS time defined based on L1/L2 P(Y) iono-free
measurement combination
– Clock correction terms in NAV data convert SV time to GPS
time
• C/A-to-P(Y) timing variations specified to be < 10 ns,
2s, but no corrections provided
– One reason why L1/L2 C/A code will never be as accurate as
L1/L2 P(Y)
• L5 introduces new group delay offsets
– Q: How to tie L5 into GPS time?
21
Satellite Group Delays
L1
C/A
L1 C/A-P(Y)
P(Y)
[1  f L1 / f L 2 2 ]  TGD
P(Y)
L2
C/A
L2 C/A-P(Y)
I5
L5
Q5
DTIQ5
22
L5 Message Group Delay Parameters
• Clock correction parameters (af05, af15, af25) provided to
correct SV time to GPS L5 time
– Simplest way to provide accurate time for L1 C/A-L5 users
– Presumes Control Segment monitors L1 C/A and L5
• I5-to-Q5 transition offset corrected by DTIQ5 message
parameter
• “TGD” terms provided for single-frequency L5 users
and L2-L5 users
23
Summary
• L5 Signal Specification complete
– RTCA publication in December 2000
• L5 signal and message structure provide many
advanced features relative to C/A
– Improved ranging precision and accuracy
– Robustness in interference/low SNR conditions
– Flexible message format for future growth
24
Special Acknowledgements
•
•
•
•
•
•
•
•
•
Swen Ericson, MITRE
Gary McGraw, Rockwell Collins
Peter Fyfe, Boeing
Karl Kovach, ARINC
Keith Van Dierendonck
Tom Morrissey, Zeta Associates
Tom Stansell & Charlie Cahn
Rich Keegan (Leica)
Jim Spilker