Transcript easyDATA Professional
easyDATA Vending Plus
Data Capture and Analysis
easyDATA Vending Plus
Reads data from coin mechanisms and vending machine control units Laser scanner for inventory management Failure detection and route management Online - Data connection for direct data exchange Various other applications such as ordermanagement for technicians possible
Can be linked with external GPS module Signatures per Touchscreen possible Printing recipt by miniprinter possible
easyDATA Vending Plus
TFT-Display for clear information
Touchscreen for capture signature
Windows CE © 6.0 base
Bluetooth and WLAN for data connection
Data will be safed by flash(Micro-SD)
Infrared and IrDA standards
RS232, TTL and analog interfaces all in one
easyDATA Vending Plus
Easy to operate, even without training
Absolutely safe and secure data storage
Bar-code extension enables inventory management
Continuously adapted to the requirements and specific features of leading manufacturers
Adapted to state-of-the-art technologies easyDATA-series is often field tested in vending branch
easyDATA Vending Plus in a network
Touchscreen for capture signature Data link over UMTS Inventory management, errors, time Server Route managment, Contract for engineers, Delivery notes, wares Mobile printer
GPS-receiver Data of vendingmachines / Update Encashment data All relevant information are exchanged online with the home network and are available directly at the machine on site and in the office .
easyDATA Vending Plus in a network
Refiller orders, technicians orders, delivery notes, diagrams for engineers can be sent and directly read data, malfunctions, repairs, etc. can be sent back to the office.
If necessary, GPS coordinates can be determined with external GPS receiver and will be immediately sent to the company. Thus, those supervisors can be determined, which has the shortest distance to a malfunctioning machine.
Documents can be sent to EasyData and printed out via a mobile printer on site
.
Data link to the home server via GPRS / EDGE / UMTS / HSDPA mobile phone and via Bluetooth.
The application possibilities are almost unlimited.
Simply Operation Process to read data:
either link and push „READ“
or easyDATA hold toward data-eye and push „READ“
Whenever the LED is lighten, data will be read Wait until the LED voids and easyDATA sends an acoustic signal ready
easyDATA Vending Plus and Barcode
Complete inventory management possible Quality laser scanner is integrated in the Device. Thus distance readings are possible.
The quality of conventional CCD barcode readers is far exceeded by the used laser scanner.
Different options for capture products, times, faults, test sales, notes, etc. can be realized Simple and trouble-free
Barcode - an efficient concept
1.
2.
3.
4.
5.
In each machine is a barcode stuck with the machine number The supervisor logs in to the vendingmachine by scanning a barcode When needed, the coin control unit or the vending machine controller will be read out The filled or removed products, times, faults, test sales, etc. will be read in The final step is the logout at the vending machine by scanning the barcode
Barcode - an efficient concept The benefits
Accurate detection of filled or revoked goods.
Allocation of goods to the respective machines (pitches) The driven route can be tracked accurately using the vending machine bar code By the Clock in easyDATA, time recording is available . The logon and logoff by the vending machine bar code the exact time will be saved The dwell time at the machine and the duration of the Approach is recorded Recurring problems can be easily detected by an evaluation software
easyDATA Vending Plus Software in practice
Special Features:
Automatic Interface Control (AIC) Ensures data-interface compatibility with almost all devices on the market Provides for future extensions Adapted to state-of-the-art technologies “Future-proof“ and expandable hardware still supports the requirements of older vending machines (not often the case with other handhelds available on the market)
Functions & Features
Interfaces / Protocols:
9-pin D-Sub for RS232 printer output NRI G26 Höfer mode using plug-in connection or IR G46 DDCMP using plug-in connection or IR DEX/UCS using adapter cable (IR available) Standard infrared DDCMP (Eva-Dts 4.0, Vidts) supporting a wide variety of coin mechanisms and vending-machine control units
IRDA infrared eDDCMP (Eva-Dts 5.0, Eva-Dts 6.0)
Functions & Features
Interfaces / Protocols:
EVA-DTS
FAGE / P3000 protocol using infrared
Flexible levels of Sub-D plug, capable of simulating virtually all common interfaces
various specialized data protocols
Transfer of completed coin settings/vending machine settings with Eva-Dts, Höfer and DEX/UCS - considerable time savings
Beispiele
Printer emulation: MEI 1900, Necta Brio, Azkoyen, ........
Höfer – Protocol: Vendo, AHT, NRI G26, .....
EVA-DTS DDCMP over IR, nearly every older EVA DTS capable device like MEI CF560, CF690, NRI G46, E66, Sielaff, FAGE, Wittenborg, ......
DEX/UCS: Vendo, Coinco, .....
EVA-DTS eDDCMP over IrDA
Special protocols like printer emulation over IrDA, DEX over IrDA
Technical Data:
Infrared and IrDA-standard RS232, TTL and Analog interface, all in one Laserscanner Windows CE © 6.0 –Basis Processor PXA 300 128 MB RAM TFT-Touchscreen USB Bluetooth WLAN Micro-SD (1GB) for safe Datastorage Li-Ion Accu with 2 x 2600 mAh Dimension: 203 mm x 75 mm x 39 mm Wight (Standard 1 Accu): 285g
Software - Features
Convergence of various data formats in a standardized form
Freely definable output fields
Output in XML, CSV and other text formats, wri te to databases via ODBC
Customer specifications possible
Output format is easy to implement in other software products
Reseller: interTronic Innovations GmbH Schiller Strasse 661 A-3571 Gars am Kamp, Austria www.intertronic.at