Transcript Slide 1

Cognis Performance
Chemicals (CPC) UK
Amanda Eastwood
Overview
•
•
•
•
CPC UK and Hythe site background
CPC UK Product split
Cognis PCI market
Bisomer Monomers
– Hydroxy Monomers
– Speciality Adducts
– Speciality Methacrylates
Cognis Performance
Chemicals UK Sites
Hythe site
Cognis UK, Hythe - Key Facts
– Employees ~ 200
– Site accreditations:
- ISO 14001
- ISRS Level 9 (DNV)
- ISO 9000 : 2000
- Investor in People Award (IIP)
– COMAH / IPPC regulated
– Non-unionised
CPC UK Hythe, Site History
• 1959 : Union Carbide, first European site
- ethylene oxide & derivatives (e.g glycols, PAGs)
• 1978 : BP acquired UCC’s European assets
• 1981 : EO unit closed, expansion into specialities
- OH monomers, speciality PAGs (e.g high viscosity)
• 1992 : Divestment from BP Chemicals to form INSPEC
- significant period of business investment
• 1998 : INSPEC acquired by Laporte
• 2000 : Degussa acquired Laporte. EU ruling to divest
Hythe (2001)
• 2003 : Cognis acquired LPC Hythe (1st April)
CPC UK Business Split
• Specific Business Unit Split
PCI
PCI
Bisomer
3%
3%
12%
12%
Synlubes
Synlubes
Breox, Bisolube
49%
49%
Plastics
Plastics
Bisoflex
Others
Others
36%
36%
Polymers Coatings and Inks
•Consumer Coatings
•Industrial Coatings and Adhesives
•Graphic Arts
•Emulsion Polymerisation
•Polymer Building Blocks
•Raw materials for composite and polymers
Polymer Building Blocks
Speciality monomers and additives for enhanced polymer
properties and improved processing performance
Speciality Monomers
• Emerox – Azelaic acid
• Emery – Pelargonic acid
• Empol – Distilled/hydrogenated dimer acids
• Sovermol – Diols and alcohols
• Photomer – UV curing monomers and oligomers
• Bisomer – Speciality acrylate and methacrylate monomers
Additives
• Texaphor – Pigment dispersants
• Texaphor P-Series – Polymeric dispersants
• Perenol – Air-release, flow, slip agents
• Rilanit – Thickening and thixotropic agents
Bisomer
Monomers
Hydroxy
Monomers
Speciality
Adducts
Speciality
Methacrylates
Bisomer Hydroxy Monomers
O
ethylene oxide
R
OH
O
O
O
Bisomer
HEA,R R
Bisomer HEA,
= H= H
Bisomer HEMA,
R =Rmethyl
Bisomer
HEMA,
= methyl
R
OH
methacrylic acid
OH
O
O
propylene oxide
R
O
Bisomer
HPA, R = H
Bisomer HPA, R = H
Bisomer
= methyl
Bisomer HPMA,
HPMA, R =Rmethyl
Bisomer Hydroxy Monomers Applications
Photoimage
Photoimage
5%
5%
Adhesives &
Adhesives and Sealants
Sealants
7%
7%
Dispersion
Emulsion Polymerisation
9%
9%
Industrial
Industrial Coatings
21%
21%
Radcure
Radcure
3%
3% Other
1%
Others
1%
Automotive resins
OEM/Refinish
OEM/Refinish
54%
54%
Clear Coat Technologies
• Acrylic polyol/Amino
– 1 pack, widely used, high gloss, high DOI, low cost, rel
poor acid etch and mar resistance, high temp crosslink
• Acrylic polyol/Isocyanate
– 2 pack, requires special application eqpt, high cost, good
appearance, good mar/acid etch resistance, low temp
• Acrylic GMA - Acid/Anhydride
– high cost, rel good appearance, rel good mar and acid etch
resistance, high temp crosslink
• Polyester/Amino
– 1 pack, fair gloss and DOI, poor environmental performance
• Developments
– carbamate, fluoro modified, silane modified
Typical Acrylic Polyol
Styrene
Methyl methacrylate
Bisomer HEMA
Butyl acrylate
Acrylic acid
37.5
29.0
23.5
9.5
0.5
100.0
(3.1% OH)
Acrylic Polymerisation
• Initiation
RR1
R
CH2
R
CHX
+ R1
RCH2
CHX
• Propagation
RCH2
CHX
CH2
CHX
XHC
H2CR'
RCH2
CHX
CH2
CHX
• Termination
RCH2
CHX
+
RCH2
CHX
XHC
H2CR'
Amino Crosslinking
M/F, U/F, benzoguanamine etc
OH
OH2C
CH2OCH3
N
Typical 1 pack
Acrylic polyol/HMMM
Schematic
N
HO
N
OH2C
CH2OCH3
HO
N
N
N
HO
• Auto OEM - COB, high solids
• Coil coatings, white goods etc
OH2C
CH2OCH3
OH
OH
Isocyanate Crosslinking
Isocyanates, biurets, isocyanurates etc
O
NHC(O) BL
HO
R
O
N
H
NCO
OH
• Auto OEM/refinish, industrial, wood, plastic etc
• 1930’s - devt, 1970’s - impact
• Current legislation - high solids, waterborne
R1
NCO
+
BL
Bisomer Speciality Adducts
Hydroxy functional (meth)acrylates with varying EO/PO chain lengths
C2H3R
O
OH
R
O
(C2H3RO)nH
O
+
1
R
O
Catalyst
O
CH2
Temperature
R
1
CH2
R1 = H, Me & R = H, Me
Properties: Hydrophobic/philic, low Tg, low shrinkage
Applications: Reactive diluents, urethane capping co-monomers, copolymerisable surfactants, waterborne systems
Bisomer Speciality Adducts
O
O
_ OH
6
O
_
6
OH
O
Bisomer PPA6
Bisomer PEA6
O
O
_ OH
5
_
6
OH
O
O
Bisomer PPM5S
Bisomer PEM6 LD
Bisomer Speciality Adducts
O
OH
_
6
O
_
3
O
Bisomer PEM63P
O
O
OH
_
6
O
_
3
O
Bisomer PPM63E (dev)
_
3
OH
O
Bisomer PEM3 (dev)
Bisomer Speciality Adducts
Polymer Design
(Meth)acrylates - reactivity selection
Primary/Secondary hydroxyl pendant - reactivity choice
Low Tg
Hydrophilic / hydrophobic balance
Low cure shrinkage adhesion
Block EO / PO developments
H&S
EINECS ‘polymer’ monomer-free systems
High Mol weight
High flashpoint
Low vapour pressure
Bisomer Speciality Adducts
Applications
•
•
•
•
•
•
•
•
•
•
•
Photopolymer printing plates
Photoresists
UV cured adhesives
UV PVC wear layers
UV wood coatings
UV OPV
Water dispersible polymers
•
•
•
•
•
•
•
Copolymerisable surfactants
Textile treatments
Acrylic fibre modification
VAM copolymers
Styrene-acrylic dispersions
All acrylic dispersions
Pigment dispersants
Anaerobic sealants
Adhesives
PSAs
Medical adhesives / hydrogels
•
•
•
•
•
Antistatic coatings
Antifouling marine paints
Electrophoretic coatings
Electrochromic polymers
Liquid crystal display polymers
Bisomer Pemcure Monomers
Caprolactone modification
H
O
H2C
O
CH2CH2O
C(CH2)5O
H
_
2
O
Bisomer PEMCURE 12A
Properties: Flexibility, adhesion, impact resistance, light
stability weathering, solvent/chemical resistance.
Bisomer Speciality Methacrylates
•
History
–
–
–
–
–
1980’s 1990 1992 1993 1997 -
Range developed
Development unit commissioned
INSPEC, MMU1 commissioned
MMU2 commissioned, MMU1 closed
MMU3 commissioned
• Process Outline
R
OH
O
+
O
∆
Catalyst
OR
+
H3C
OH
O
Mono, di and trifunctional methacrylates with aliphatic and aromatic EO/PO spacers
2004 Volume by Application
2%1%1%
3%
3%
3%
Coating Technology
18%
Composite Resins
Chemical Fixings
Anaerobic Adhesives
3%
Rubber/PVC Coagents
Dry Film Resist
Acrylic Composites
8%
16%
Marine Coatings
Water borne Coatings
Construction Sealants
Insulating Resins
9%
Thermoplastic Polyolefin
Photopolymers
Others
9%
12%
11%
Metal Impregnation
Superabsorbants
Coating Technology
• Co-monomers for acrylic resins
• Usually mono-functional to modify properties such
as flexibility and hydrophil/phobicity of the resin
•Commercial
- Bisomer alkyl methacrylates - hydrophobic
- Bisomer MPEG(X)MAs – hydrophilic
•Development
- Bisomer TBCHMA – hydrophobic, UV stable
Composite Resins
Unsaturated polyesters (UPEs) and vinyl esters used as ‘structural’ resins
in construction, car bodies, sinks, baths etc.
UPE - polyalcohol + polyacid (unsaturation from acid)
Styrene - reactive diluent around 35-45%.
Peroxide initiator
Tertiary amine synergist - lowers the reaction temperature.
Bisomer PTE is an alternative tertiary amine synergist which is not
toxic
Bisomer MFMs are used as property modifiers and partial styrene
replacement in composite resins.
Composite Resins
Styrene replacement
Styrene is a very good reactive solvent, however, health issues, fire
hazards and legislation problems are associated with it.
Less styrene is required if the molecular weight of the resin is lowered this results in reduced performance making MFM monomers desirable
as performance enhancers
Di or tri functional monomers increase the crosslinking and improve
mechanical properties of the UPE
Some companies are looking at total styrene replacement - MFMs key
option
Composite Resins
HEMA*
Low cost, low smoke emission, good viscosity diluent,
HPMA*
Low cost, low smoke emission, good viscosity diluent, low
odour, hydrophobic
BDDMA
Low smoke emission, good visc. diluent, low odour, R43
label free, fumarate compatible, improved mech. and thermal
props., improved HDT
BGDMA
Low smoke emission, good visc. diluent, fumarate
compatible, improved mech. and thermal props., imp. HDT
E2BADMA R43 label free, fumarate compatible, low odour, improved
mech. and thermal props., imp. HDT
EGDMA
Good visc. diluent, fumarate compatible, improved mech.
and thermal props., imp. HDT
TEGDMA
Low smoke emission, good visc. diluent, R43 free fumarate
compatible, low odour, improved mech. props., imp. HDT
TMPTMA
Fumarate compatible, low odour, improved mech. and
thermal props., imp. HDT
* Hydroxy monomers
Chemical Fixings
Bonding is achieved by utilisation of a two pack resin system
Traditionally in industrially based on UPE diluted in styrene – styrene no
acceptable for use in many markets e.g. mining, DIY
Monomer needs to perform - low shrinkage and strength are required
Bisomer monomers commonly used,
• E2BADMA
• TEGDMA
• EGDMA
• PEG200DMA
• BGDMA
• TMPTMA
• BDDMA
Two pack system using peroxide initiator and amine accelerator
Bisomer PTE is an alternative tertiary amine accelerator
Anaerobic Adhesives
• Anaerobic adhesives cure when atmospheric oxygen
is excluded.
•‘One pot’, fast cure speed without heat or lamps
• Adhesion is very fast for metals, however for plastics and
other non-metals primers are required
• Strength of bond depends on the application
• Currently sell following Bisomers
- PEG200DMA
- MPEG350MA
- TEGDMA
- LMA
choice not restricted as depends on desired properties
How do anaerobic adhesives work?
• They cure via a free radical polymerisation
+ monomer
Organic
hydroperoxide
ROOH
amine
metal
surface
Polymer
R∙
Free
radical
+ monomer
+ O2
ROO∙
Rubber coagents
Rubber is upgraded by vulcanisation using elemental sulphur. This method
uses retarders, peptisers and accelerators which are difficult to make,
dangerous to use and environmentally unfriendly.
New techniques involve coagents such as triallyl cyanurate (TAC),
triallyl isocyanurate (TAIC) and MFMs.
TAC and TAIC have suspected toxicological problems
Bisomer BGDMA, BDDMA, EGDMA and TMPTMA, are well established
in this market.
PVC coagents
MFMs used as coagents in PVC systems to improve mechanical and
heat resistance properties
Monomers can be peroxide cured in the formulation or post cured using
high energy electron beam curing.
Typically monomers used in this application contain no ether oxygen as
this gives poor stability to the polymer.
Bisomer TMPTMA most common for increasing cross link density to
give improved properties.
Basic formulation : Dry film resist
Polymer binder
Photoinitiator
Reactive monomers
Dye
Additives
Total
Solids ~ 60% NV
wt %
55 - 70
4-8
20 - 40
0.3 - 0.7
1.5 - 2.5
100
Bisomer Monomers
Photoresist Monomers
• Urethane/isocyanate capping
PEM6LD, PPM5S
• Reactive diluent property modifiers
E10BADMA, E17BADMA, EP100DMA, EP150DMA,
PEG200DMA, PEG400DMA, PPG400DMA, TEGDMA
Acrylic Composites
MMA used as main monomer, PMMA added as a filler to
reduce shrinkage in applications such as PMMA sheeting,
synthetic marbles and tiles, moulded sinks, baths and
shower units, acrylic floors, grouts and bridge repairs
Bisomer monomers used in small percentages as property
modifiers to upgrade properties of the final polymer
• BDDMA
• DDDMA
• EGDMA
• TEGDMA
• TMPTMA
Similar to UPE – forms a thick composite
Bisomer Speciality Methacrylates
Hydrophobic mono-functional monomers
CH3
CH3
O
O
O
O
CH3
CH2
Bisomer IDMA
O
O
CH3
11
7
H3C
CH3
H3C
CH2
Bisomer LMA
10
H3C
CH2
Bisomer C13MA
Properties: Hydrophobic, low Tg, low shrinkage
Applications: Coatings, adhesives, sealants, elastomers
Bisomer Speciality Methacrylates
Hydrophilic mono-functional monomers
O
O
CH3
O
n
H3C
Methoxypolyethyleneglycol
methacrylate
CH2
Bisomer : MPEG350MA, MPEG550MA, S7W, S10W, S20W
Properties: Hydrophilic, various EO contents, EINECS polymer
Applications: Water dispersible polymers, water treatment polymers, reactive
grouts, concrete admixtures, copolymerisable surfactants,
dispersants, adhesives, hydrogels
Bisomer Speciality Methacrylates
Hydrophobic di-functional monomers
O
O
O
O
O
O
O
O
n
CH3
H3C
CH2
H3C
Bisomer BGDMA
CH2
H3C
CH2
H3C
CH2
n = 4 Bisomer BDDMA
n = 10 Bisomer DDDMA
Properties: Hydrophobic, crosslink strength, low viscosity
Applications: Coatings, adhesives, sealants, elastomers, rubber
co-agents, USP systems, PMMA
Bisomer Speciality Methacrylates
Hydrophobic di-functional monomers
O
O
O
CH2
H3C
O
H2 C
CH2
H3C
Bisomer TCDDMA
Properties: Low shrinkage, hydrophobic
Applications: Polyolefin, adhesives
CH2
Tricyclodecanediol
dimethacrylate
Bisomer Speciality Methacrylates
(Poly)ethylene glycol di-functional monomers
O
O
O
CH3
O
n
(Poly)ethyleneglycol
dimethacrylates
CH2
H3C
CH2
Bisomer : EGDMA, DEGDMA
Properties: High functionality, low viscosity, crosslinking strength
Applications: Coatings, adhesives, UPE systems, rubber coagents, PMMA
Bisomer : TEGDMA, PEG200DMA, PEG400DMA
Properties: Crosslinking, impact resistance, low H&S
Applications: Coatings, adhesives, sealants, elastomers
Bisomer Speciality Methacrylates
Hydrophobic (poly)propylene glycol di-functional monomers
O
H3 C
O
O
CH3
O
n
(Poly)propyleneglycol
dimethacrylate
CH2
H3C
CH2
Bisomer PPG400DMA
Properties: More flexible crosslinking, solvent and heat resistance
Applications: Adhesives, dental compositions, textile treatment
Bisomer Speciality Methacrylates
Block polyakyleneglycol di-functional monomers
O
O
O
O
CH3
O
O
n
m
CH3
H3C
n
Polyalkyleneglycol
dimethacrylates
CH2
CH2
Bisomer : EP150DMA, EP100DMA, EP80DMA
Properties: Hydrophilic/phobic, liquid. Tailor made PAG core
Applications: Electronics, photoimaging (hydrophilic balance), polymer developments
Bisomer Speciality Methacrylates
Aromatic di-functional monomers
O
O
O
O
n
m
O
O
Ethoxylated Bisphenol A dimethacrylate
Bisomer E(X)BADMA
X= m+n = 2, 4, 10, 17, 30(E30W)
Properties: EO variation hydrophilic/phobic,Flexible/rigid (EO/bisphenol A core)
Applications: Anaerobic adhesives, sealants, styrene replacement, electronics,
water treatment, hydrogels
Bisomer Speciality Methacrylates
Tri-functional monomer
CH2
H3C
Trimethylolpropane
trimethacrylate
CH3
O
O
CH2
O
O
CH3
O
O
H3C
Bisomer TMPTMA
CH2
Properties: High methacrylate density, low viscosity, hydrophobic
Applications: Anaerobic adhesives, sealants, rubber/PVC modification,
polymer crosslinking
Monomer Developments
Cyclic aliphatic mono-functional monomer
O
Bisomer tBCHMA
4-tButylcyclohexyl methacrylate
O
Properties: Light stable, bulky monofunctional, high free volume
Applications: High solids resins, compatibilising monomer, adhesives
General Methacrylates
Applications
•
•
•
•
•
•
•
•
•
•
Rubber co-agents
Anaerobic adhesives
Industrial sealants
Chemical fixings
Acrylic sheet
Superabsorbant polymers
Photopolymers/resists
Industrial coatings
Textile treatment
Water treatment
•
•
•
•
•
•
•
•
•
•
PVC modification
Waterborne polymers
Polymerisable surfactants
Styrene replacement
UPE resins
Metal impregnation
Wood coatings
UV / EB systems
Concrete admixtures
Alkyd reactive diluents
Bisomer
Monomers
Hydroxy
Monomers
Speciality
Adducts
Speciality
Methacrylates