Transcript Document

We are experts in the fluid
pressure conversion
Summary
 About us
 Product Introduction
 Contact Us
About Us
ShenZhen SITEC Flow Control Co., LTD is founded in 2007, is a professional engaged in
research 、develop and manufacture products of fluid pressure conversion .The main products
are Air Booster、Air Drive Gas Booster、Air Drive Liquid Booster、Ultra High Pressure Hand
Control Needle Valve、Ultra High Pressure Gas Control Needle Valve and other related parts.
The headquartered of SITEC is in ShenZhen city, GuangDong Province, China, which is near to
HongKong.
About Us
With the spirit of rigorous、pragmatic、innovation and cooperation, the
company has grown rapidly in the last five years. And our products have been
recognized by the market.
Our Value
Show
Passion
Cooperation
Innovation
SITEC
Effectiveness
Taking
Ownership
Product Introduction
--- Characteristic
 High Output Pressure -- Maximal liquid and gas output pressure can be as high as 500MPA
and 120MPA separately .
 Wide Range Application -- The medium of liquid booster can be hydraulic oil、water and
most chemical corrosion liquid. And the medium of gas booster can be Air、Nitrogen、 Helium
、Oxygen and most of Inert gas.
 Flexible Application -- The selection of different types of products, available in different
pressure regions.
 Easy to Adjust -- In the pump drive pressure range, adjust the input pressure, Thus the
output pressure can be get the corresponding adjustment .
 Safe Operation-- Use gas to drive, No power and no spark.
 Simple Maintenance -- Performed the same work, compare with other boosters, the parts
and seals of our products are less, so the maintenance is simple.
 Save Pressure Automatically -- No matter what causes loop pressure reduction, our booster
will start automatically, Supplement leakage pressure, Maintain the constant loop pressure
Product Introduction
--- Application
 Valves, pipe fittings, pressure vessels static and bursting test
 Automobile braking system and injection nozzle test
 Hydraulic test of building materials test
 Clamping, forming, drilling, cutting, stamping and other hydraulic equipment power
 Instrumentation testing and calibration
 Machinery and equipment lubrication system oiling
 Aerospace - accessory static and dynamic test
 High pressure cleaning and water cutting equipment of water injection
 Valve test clamping force
 Refrigerant transfer, replacement of canned
Product Introduction
--- Classification
AB Series
GB/GBD/2GBD/GBT/2GBT Series
M/XH/XT/AH/AT Series
Air Booster
Air Drive Gas Booster
Air Drive Liquid Booster
Air Booster -- AB Series
AB series of air booster is specially designed for solving the low pressure of general compressed air. This
series of products can make general compressed air through self-pressurizing manner to output high pressure. All
products are made of aluminum alloy and stainless steel, all seals are imported quality products.
Remark: The maximum air driven pressure is 8.3Bar. In order to ensure the pump life, the recommended air driven
pressure is 7Bar or below. (Pa=Driving Pressure Pi=Inlet Pressure Po=Outlet Pressure )
Model
Booster
Pressure
Ratio
Minimum
Inlet
Pressure
Pi (Bar)
Maximum
Outlet
Pressure
Po (Bar)
Outlet
Pressure
Formula
Po
Gas
Inlet Size
Gas
Outlet Size
Maximum Flow
Rate L/Min
@ Pi=6Bar
AB02
2:1
0.5
16.6
2Pa
PT1/4"
PT3/8"
513 @Pi=6
4AB02
2:1
0.5
16.6
2Pa
PT1/2"
PT1/2"
1450 @Pi=6
AB04
4:1
0.8
33.2
4Pa
PT1/2"
PT1/2"
493 @Pi=6
AB05T
5:1
1.7
41.5
5Pa+Pi
PT1/2"
PT1/2"
820 @Pi=6
AB07
7:1
1.7
58.1
7Pa
PT3/8"
PT3/8"
274 @Pi=6
AB08T
8:1
1.7
66.4
8Pa+Pi
PT3/8"
PT3/8"
482 @Pi=6
AB10
10:1
2.5
83
10Pa
PT3/8"
PT3/8"
225 @Pi=6
AB15
15:1
4.0
124.5
15Pa
PT3/8"
PT3/8"
185 @Pi=6
Air Booster
Products Display
AB02
4AB02
AB15
AB05T
Air Drive Gas Booster -- GB Series
GB series of air drive gas booster is single-stage and single-acting pump, which consist of a large area
reciprocating air drive piston directly coupled by a connecting rod to a small area piston. The gas piston operates
in a high pressure gas barrel section. Each gas barrel end cap contains high pressure inlet & outlet check valves.
The piston diameter is 160mm, all high pressure pump head is provided with an exhaust cooling. This series
products are mainly used as of output high pressure, instead of requiring the flow rate on various occasions.
Remark: The maximum air driven pressure is 8.3Bar. In order to ensure the pump life, the recommended air driven
pressure is 7Bar or below. (Pa=Driving Pressure Pi=Inlet Pressure Po=Outlet Pressure)
Model
Booster
Pressure
Ratio
Minimum
Inlet
Pressure
Pi (Bar)
Maximum
Outlet
Pressure
Po (Bar)
Outlet
Pressure
Formula
Po
Gas Inlet
Size
Gas Outlet
Size
Maximum Flow Rate
L/Min
@ Pi=6Bar
GB02
2:1
0
16.6
2Pa
PT1/2"
PT1/2"
412 @Pi=6
GB04
4:1
1.2
33.2
4Pa
PT1/2"
PT1/2"
354 @Pi=6
GB05T
5:1
1.7
41.5
5Pa+Pi
PT1/2"
PT1/2"
672 @Pi=6
GB07
7:1
1.7
56
7Pa
PT3/8"
PT3/8"
252 @Pi=6
GB08T
8:1
1.7
66.4
8Pa+Pi
PT3/8"
PT3/8"
370 @Pi=6
GB10
10:1
1.7
80
10Pa
PT3/8"
PT3/8"
196 @Pi=6
GB15
15:1
3.4
105
15Pa
PT3/8"
PT3/8"
164 @Pi=6
GB25
25:1
7.5
200
25Pa
PT1/4"
PT1/4"
91 @Pi=6
GB40
40:1
12
320
40Pa
PT1/4"
PT1/4"
56 @Pi=6
GB60
60:1
21
480
60Pa
PT1/4"
PT1/4"
72 @Pi=6
GB100
100:1
30
700
100Pa
PT1/4"
PT1/4"
45 @Pi=6
GB130
130:1
45
900
130Pa
PT1/4"
PT1/4"
28 @Pi=6
Air Drive Gas Booster – GBD/2GBD Series
GBD series of air drive gas booster is single-stage and double acting pump. It is an improvement on the basis
of GB series. Mainly used in the pressure and flow at the same time requirements of occasions. Compared with the
GBD series,2GBD series has one more cylinder, thus the flow rate is higher than GBD series. This series equip with
the air cooling device, so no need the additional cooling pump.
Remark: The maximum air driven pressure is 8.3Bar. In order to ensure the pump life, the recommended air driven
pressure is 7Bar or below. (Pa=Driving Pressure Pi=Inlet Pressure Po=Outlet Pressure)
Model
Booster
Pressure
Ratio
Minimum
Inlet
Pressure
Pi (Bar)
Maximum
Outlet
Pressure
Po (Bar)
Outlet
Pressure
Formula
Po
Gas Inlet
Size
Gas Outlet
Size
Maximum Flow Rate
L/Min @ Pi=6Bar
GBD07
7:1
0.1
56
7Pa+Pi
PT3/8"
PT3/8"
513 @Pi=6
GBD10
10:1
1.7
83
10Pa+Pi
PT3/8"
PT3/8"
393 @Pi=6
GBD15
15:1
3.4
124.5
15Pa+Pi
PT3/8"
PT3/8"
298 @Pi=6
GBD25
25:1
7.5
207.5
25Pa+Pi
PT1/4"
PT1/4"
174 @Pi=6
GBD40
40:1
12
332
40Pa+Pi
PT1/4"
PT1/4"
135 @Pi=6
GBD60
60:1
21
498
60Pa+Pi
PT1/4"
PT1/4"
112 @Pi=6
GBD100
100:1
34.5
830
100Pa+Pi
PT1/4"
PT1/4"
94 @Pi=6
2GBD07
7:1
0.1
56
7Pa+Pi
PT1/2”
PT1/2
974 @Pi=6
2GBD10
10:1
1.7
83
10Pa+Pi
PT3/8”
PT3/8”
702@ Pi=6
2GBD15
15:1
3.4
124.5
15Pa+Pi
PT3/8”
PT3/8”
739 @Pi=6
2GBD25
25:1
7.5
207.5
25Pa+Pi
PT3/8”
PT3/8”
330 @Pi=6
2GBD40
40:1
12
332
40Pa+Pi
PT3/8”
PT3/8”
237 @Pi=6
2GBD60
60:1
21
498
60Pa+Pi
PT3/8”
PT3/8
213 @Pi=6
2GBD100
100:1
34.5
830
100Pa+Pi
PT1/4”
PT1/4”
161 @Pi=6
Air Drive Gas Booster – GBT/2GBT Series
GBT series of air drive gas booster is double-stage and double acting pump. It is suitable for various highpressure gas test or as a simple high pressure gas source. Compared with the GBT series, 2GBT has one more
cylinder, thus the flow rate is higher than GBT series. The gas drive part can be without lubrication type gas. This
series equip with the air cooling device, so no need the additional cooling pump.
Remark: The maximum air driven pressure is 8.3Bar. In order to ensure the pump life, the recommended air driven
pressure is 7Bar or below. (Pa=Driving Pressure Pi=Inlet Pressure Po=Outlet Pressure)
Model
Booster
Pressure
Ratio
Minimum
Inlet
Pressure
Pi (Bar)
Maximum
Outlet
Pressure
Po (Bar)
Outlet
Pressure
Formula
Po
Gas Inlet
Size
Gas
Outlet
Size
Maximum Flow
Rate L/Min @
Pi=6Bar
GBT7/15
15:1
0.1
131
15Pa+Pi
PT3/8”
PT3/8”
215 @Pi=6
GBT7/25
25:1
0.1
235
25Pa+Pi
PT3/8”
PT3/8”
186 @Pi=6
GBT15/25
25:1
3.4
235
25Pa+Pi
PT1/4”
PT1/4”
156 @Pi=6
GBT7/40
40:1
0.1
332
40Pa+Pi
PT1/4”
PT1/4”
136 @Pi=6
GBT15/40
40:1
3.4
332
40Pa+Pi
PT1/4”
PT1/4”
85 @Pi=6
GBT15/60
60:1
3.4
498
60Pa+Pi
PT1/4”
PT1/4”
65 @Pi=6
GBT30/60
60:1
12
498
60Pa+Pi
PT1/4”
PT1/4”
96 @Pi=6
GBT15/100
100:1
3.4
830
100Pa+Pi
PT1/4”
PT1/4”
32 @Pi=6
2GBT7/15
15:1
0.1
131
15Pa+Pi
PT3/8”
PT3/8”
415 @Pi=6
2GBT7/25
25:1
0.1
235
25Pa+Pi
PT3/8”
PT3/8”
352 @Pi=6
2GBT15/40
40:1
3.4
332
40Pa+Pi
PT3/8”
PT3/8”
160 @Pi=6
2GBT15/60
60:1
3.4
498
60Pa+Pi
PT3/8”
PT3/8”
121 @Pi=6
2GBT30/60
60:1
12
498
60Pa+Pi
PT3/8”
PT3/8”
185 @Pi=6
Air Drive Gas Booster
Products Display
GB
GBD
2GBT
2GBD
GBT
Air Drive Liquid Booster – M Series
M-Series of air drive liquid booster is use a large area of low pressure gas to drive, thus get small area of the
piston end of the high pressure liquid. Booster pressure ratio determines the maximum output pressure. When the
booster is rapid reciprocating work, with the output pressure is close to the maximum load pressure value. the
booster working to slow down until stop, at this time, the pressure of the both piston end and liquid pressure
achieve to balance, the piston keep stop and the energy consumption is minimum. When the output pressure
decreases or increases the pressure of the driving gas, the booster will automatically restart, and work cycle to
next balance. The pump head can be selected according to different media carbon steel or stainless steel.
The weight of M series is 3kg, so it’s very suitable for work in outdoor or marine.
Remark: The maximum air driven pressure is 8.3Bar. In order to ensure the pump life, the recommended air driven
pressure is 7Bar or below. (Pa=Driving Pressure Pi=Inlet Pressure Po=Outlet Pressure)
Series
Booster
Pressure
Ratio
M
10:1 ~ 100:1
Booster
Pressure
Ratio
Maximum
Outlet
Pressure
(Bar)
M10
10:1
M16
Model
Liquid inlet and outlet size
Inlet
Outlet
PT3/8"
PT3/8"
Output Liquid Pressure (Bar)
0
25
50
75
100
150
83
15.27
4.75
2.15
0
16:1
132
8.6
6.5
4.3
M25
25:1
207.5
4.2
3.94
M45
45:1
373.5
2.76
M64
64:1
531.2
M100
100:1
830
175
3.1
1.2
0
2.72
1.47
0.82
0.46
0
1.83
1.25
0.94
0.75
0.56
1.45
1.36
1.27
1.09
0.95
0.98
0.52
0.45
0.4
0.37
L
W
H
210mm
85mm
130mm
1Mpa=10Bar≈10Kg/cm²
200
250
300
350
400
0.45
0.32
0.21
0.15
0
0.72
0.55
0.42
0.36
0.27
0.14
0
0.31
0.28
0.26
0.24
0.18
0.11
0.09
700
0
Air Drive Liquid Booster -- XH Series
XH series of air driver liquid booster widely used in various industrial fields of equipment. Parts of the domestic
to greatly reduce the cost of production, so the cost of repair is reduced. The driving piston diameter of this series
is 100mm.The series is the first choice for supporting the industrial products and all kinds of pressure test. The
driving piston diameter of this series is 100mm. The inlet size of driving gas is G3/8", and the liquid inlet an outlet
size is PT3/8".
Remark: The maximum air driven pressure is 8.3Bar. In order to ensure the pump life, the recommended air driven
pressure is 7Bar or below. (Pa=Driving Pressure Pi=Inlet Pressure Po=Outlet Pressure)
Booster
Pressure
Ratio
Maximum
Outlet
Pressure
(Bar)
0
25
50
75
XH06
6:1
49.6
25.1
10.33
6.12
0
XH10
10:1
83
17.4
6.75
4.22
2.15
0
XH16
16:1
132
10.6
5.5
3.2
2.7
1.2
0
XH25
25:1
207.5
6.1
3.94
2.72
1.47
0.82
0.46
0
XH45
45:1
373.5
3.56
1.83
0.25
0.94
0.75
0.56
XH64
64:1
531.2
2.75
1.75
1.42
1.29
1.05
XH100
100:1
830
1.52
0.98
0.65
0.5
XH130
130:1
1079
1.01
0.64
0.55
0.4
Model
Output Liquid Pressure (Bar)
100
150
175
1Mpa=10Bar≈10Kg/cm²
200
250
300
350
400
700
0.45
0.29
0.21
0.15
0
0.75
0.62
0.52
0.36
0.27
0.14
0.11
0
0.42
0.35
0.3
0.27
0.25
0.2
0.13
0.09
0
0.35
0.27
0.23
0.2
0.18
0.16
0.14
0.12
0.09
Air Drive Liquid Booster -- XT Series
XT series is double acting air drive liquid booster, Compared with XH series, the main difference is that XT
series has larger flow rate than XH series. The driving piston diameter of this series is 100mm. The inlet size of
driving gas is G3/8", and the liquid inlet an outlet size is PT3/8".
Remark: The maximum air driven pressure is 8.3Bar. In order to ensure the pump life, the recommended air
driven pressure is 7Bar or below. (Pa=Driving Pressure Pi=Inlet Pressure Po=Outlet Pressure)
Booster
Pressure
Ratio
Maximum
Outlet
Pressure
(Bar)
0
25
50
XT10
10:1
83
31.3
12.21
5.79
XT16
16:1
132
19.1
9.78
XT25
25:1
207.5
11
XT45
45:1
373.5
XT64
64:1
XT100
XT130
Model
Output Liquid Pressure (Bar)
75
100
150
5.21
4.81
2.13
7.12
4.25
2.63
1.47
0.82
6.46
3.58
2.52
1.69
1.35
531.2
4.92
3.24
2.3
1.91
100:1
830
2.77
1.71
1.32
130:1
1079
1.95
1.23
1.13
1Mpa=10Bar≈10Kg/cm²
175
200
250
300
350
400
700
1.12
0.86
0.52
0.37
0.27
0.15
1.35
1.22
1.1
0.89
0.62
0.48
0.39
0.21
1.05
0.75
0.59
0.51
0.48
0.45
0.36
0.33
0.28
0.16
0.98
0.72
0.58
0.49
0.42
0.39
0.3
0.26
0.2
0.11
Air Drive Liquid Booster -- AH Series
AH series of air drive liquid booster widely used in various industrial fields of equipment, is a general type of
air drive liquid booster . The advantage of this series are wide applications, high output pressure, large flow
rate and high reliability. AH series is the first choice for supporting the industrial products and all kinds of
pressure test. The driving piston diameter of this series is 160mm. The inlet size of driving gas is G1/2".
Remark: The maximum air driven pressure is 8.3Bar. In order to ensure the pump life, the recommended air
driven pressure is 7Bar or below. (Pa=Driving Pressure Pi=Inlet Pressure Po=Outlet Pressure)
Series
AH
Booster
Pressure Ratio
Liquid inlet and outlet size
L
W
H
PT1/2"
342mm
172mm
240mm
PT3/8"
PT3/8"
342mm
172mm
240mm
PT3/8"
PT3/8"
300mm
172mm
240mm
Inlet
Outlet
16:1 ~ 40:1
PT1/2"
64:1 ~ 130:1
170:1 ~ 400:1
Air Drive Liquid Booster -- AT Series
AT series is double acting liquid booster which is improvement based on AH series. Increase the end of highpressure chamber, so that the reciprocating process for liquid booster. This series is mainly used for the demands
of flow rate or pressure pulse of output. The flow rate is about 1.8 times of AH series.
Remark: The maximum air driven pressure is 8.3Bar. In order to ensure the pump life, the recommended air driven
pressure is 7Bar or below. (Pa=Driving Pressure Pi=Inlet Pressure Po=Outlet Pressure)
Series
AT
Booster Pressure
Ratio
Liquid inlet and outlet size
L
W
H
PT1/2"
420mm
172mm
280mm
PT3/8"
475mm
172mm
240mm
Inlet
Outlet
16:1 ~ 28:1
PT1/2"
40:1 ~ 400:1
PT3/8"
Air Drive Liquid Booster
M
XH
AT
XT
AH
Contact Us
Focal Person: Eva He
Address: 3 Floor, 19#, Dongcai Industrial Park, Gushu, Baoan Area,
Shenzhen, PRC
TEL: 86-755-27967260
E-Mail: [email protected]
FAX: 86-755-27967330
HTTP: www.szsitec.cn